Top » Catalog » SkyWing » SKYEDGE540A105

1,299.00EUR

EDGE 540-A 105" (2660 mm)
[SKYEDGE540A105]

EDGE 540-A 105 "(2660 mm)

Large, light and agile.
The Skywing EDGE 540 with a wingspan of 2,667 mm is built as an ARF model, being a very light construction made of plywood, raft and carbon in main components (fuselage, wing halves, tail panels) covered with a beautiful multicolored decoration .

The wing is connected with a carbon bayonet in a fiber sheath in the fuselage.

All servo extension cables are already in place so that the necessary additional servos can be mounted and connected quickly.

The motor hull is made of GFK and painted.

The fairings of the wheels are in coated GFK.

To protect the wing and the horizontal stabilizer for transport, bags with air cushion covered with aluminum are supplied. In addition, all associated small parts are of high quality, including wheels with aluminum bushings, steel wheel axles, CFK skid, tank, double CFK arms for the rudder, ball joints, pull-pull cables, steel, safety connectors, velcro, screws, motor support and more.

Wingspam：105"(2667mm)
Lenght：104.9"(2665mm)
Wing area：104.8dm²
Weight：12.3 Kg
Motor: 111/120 cc

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Antonov AN2 Scale 1/6 - 3m
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	EVOLUTION 10 GX gasoline motor
1 x	IMPULSE 2 F3F
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	6 mm aluminium horn with patella
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Horn 5/10 with M2 Bearing
1 x	Cable control set
1 x	DYNAMOMETER S-1580
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Profile ABS Square 2 x 1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Suncover 100cc Red
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Horn 6/20 with M3 Bearing
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Angle support XT60 conector
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Angled clevis with threaded rod M3
1 x	Support pump Xicoy X45
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	6 mm red aluminium threaded horn with patella
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	BALSA triangular 6x6x1000 mm
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Horn with ball 40x30
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Conector BEC male (10 pcs)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Conector Servo female 4 pines
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	XH female balance (3S) connector (2 pcs)
1 x	Connectors DEANS (T)
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Connectors banna oro 3 mm (M/F)
1 x	Gold antispark 5,5 mm plug
1 x	ABS angle 2,0x2,0x1000 mm
1 x	XH male balance (3S) connector (2 pcs)
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Aluminium servo arm (2 uds)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Spinner INOVA 102 mm Black
1 x	Digital precision scale up to 2000 g
1 x	Propeller APC 13x6.5 Electric Pusher
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller APC 12x10 Electric
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	F3A carbon 95 mm spinner
1 x	Spinner INO 75 mm Chrome (Imitacion metal)
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Wheel FEMA 127 mm / 6 mm
1 x	45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	102 mm INO spinner (carbon imitation)
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	Wheel 28 mm

4,955.74EUR