Inicio » Catálogo » UNILIHGT » UNSLIM13F0802WE

32.00EUR

4Wx2 Power Navigation Light, 13mm, T-Fuse White
[UNSLIM13F0802WE]

4Wx2 Power Navigation Light, 13mm, T-Fuse

New chip generation 4Wx2 reference power navigation light with wide beam angle through a specialspreading cap. The slim light is delivered as a ready assembled unit on a special, CNC manufactured aluminium tube and a permanently mounted polycarbonate cap as covering. The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be used. Alternatively you can use a 4W-3S adaption cable.

Additionally, the scope of delivery contains another cap of polycarbonate, which transforms the luminaire into a profiled/drop-shaped outside light. The cap can be separately glued in and individually varnished in the model colour.

Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These 4Wx2 luminaires are suitable for model airplanes as navigation light for a constant operation of 5-8 minutes. Please check operation temperatures and check for slight air flow cooling. The integrated temperature sensor will switch off the light in case of overheating, thus the usage as powerful position light is possible.

Technical Data
Electricity: 8W reference power, 8(12)V, 0.35A
Beam angle: >160°
Light intensity: ~100 Lumen RED
Light intensity: ~140 Lumen GREEN
Light intensity: ~190 Lumen WHITE
Dimension light cap: D13x6mm
Total mass: D13mm, 57.5mm length
Weight: 5g (without cable)
Delivery: ready to use with 1m silicon cable and series resistor for 2S, resistor for 3S enclosed

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Varilla acero roscada M3 -1m
2 x	Varilla acero Ø 4,5 mm x 1000 mm
2 x	Varilla acero roscada M2 - 1m
1 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
3 x	Varilla acero Ø 3,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
2 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Varilla acero Ø 5,0 mm x 1000 mm
3 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Varilla latón Ø 1,5 mm x 1000 mm
2 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
2 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Gancho de remolcador
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Paracaidista
1 x	Conector banana oro 2,5 mm (pareja)
1 x	Ferrita 27x14x7 mm
2 x	Soporte grifo FESTO vertical (1 pcs)
2 x	Varilla acero Ø 8,0 mm x 1000 mm
2 x	Soporte Filtro FESTO
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 7,0 mm x 1000 mm
2 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Plancha carbono 350x150x3.0 mm
2 x	Perfil de ABS "L" 6,0x6,0x1000 mm
2 x	Perfil de ABS "L" 10,0x10,0x1000 mm
2 x	Perfil de ABS "L" 5,0x5,0x1000 mm
1 x	Perfil Acero Inox. 7.5x4.5x1000 mm
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
2 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Carga cohete D3-P
1 x	Servo HITEC HS-55
1 x	Servo HITEC HS-5065 MG digital
1 x	Perfil Acero Inox. 12.3x7.7x1000 mm
1 x	Servo HITEC D131 MW nano
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Perfil de ABS "T" 2.0x2.0x1000 mm
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
2 x	Conector ABS "L" 1.0 mm x 1000 mm
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	8Wx2 Navigation & Strobe, 11mm Red/White
1 x	Tubo carton cohete 50mm x 48mm x 250mm
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	Servo HITEC HS-5485 HB Digi
1 x	Servo HITEC HS-5085 MG Digi
1 x	Soporte bomba/flitro Xicoy X45
1 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x	Conector JAPAN G2 Set 5 pares
1 x	Adaptador de hélice 3,2 mm M8
1 x	Soporte conector MPX empotrado (6 pcs)
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Soporte conector MPX (6 pcs)
1 x	Soporte Pitot JETI
1 x	Soporte Antena 2.4 Ghz (2 pcs)
1 x	Cargador LiPo Charger4
1 x	Tubo carbono (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Hélice 44,0 mm (hélice izquierda)
1 x	Adaptador de hélice 2,3 mm M6
1 x	Acoplador helices 6/8 mm
1 x	Adaptador de hélice 5 mm M8
1 x	Adaptador de hélice 6 mm M8
1 x	Adaptador de hélice 3,2 mm M6
1 x	Adaptador de hélice 3,2 mm M6
1 x	Adaptador prision. 4 mm/M8 "long" 35 mm
1 x	Simulador del Quemador NF-Jet3 RY
1 x	Servo slow down unit (0,7-14,7 sec)
1 x	Cera desmoldeante 250ml
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Perfil de ABS de media caña 8,0x1000 mm
1 x	Bolsa vacio 1200 mm x 50 m
1 x	Canal de ABS de 3,0x6,0x1000 mm
1 x	Perfil de ABS "L" 3,0x3,0x1000 mm
1 x	Perfil de ABS de media caña 4x2.5x1000 mm
2 x	Perfil de ABS rectangular 10x5,0x1000 mm
1 x	Perfil de ABS de media caña 5,0x1000 mm
1 x	Brazo de servo 50 mm con rodamiento (2 pcs)
1 x	Led Flash (rojo - 2 pcs)
1 x	DC-3 Douglas (DAKOTA) 1800 mm Tren aterrizaje electrico
1 x	Accesorios SCHARNHORST
1 x	Hélice MEJZLIK 20x10 Electric light (36 g)
1 x	Hélice MEJZLIK 22x10 Electric light (36 g)
1 x	Lente para luz, 20mm
1 x	NF-3m Heli Kit
1 x	NF-2 RC set
1 x	Simulador del Quemador NF-Jet4 RY
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
2 x	Perfil de ABS triangular 4.0x1000 mm 60º
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Cianocrilato MD GLUE+ 405 20g (viscosidad media)
2 x	Perfil de ABS de media caña 4x1000 mm
1 x	Acelerador Aero EPH 161 (500 g)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Cera desmoldemante "Alta Temperatura" 340g
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	Perfil de ABS "L" 2,0x2,0x1000 mm
2 x	Perfil de ABS de media caña 6,0x1000 mm
1 x	Canal de ABS de 2,0x4,0x1000 mm
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Perfil de ABS de media caña 7,0x1000 mm
1 x	Agente espumante para resinas epoxycas 200g
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Canal de ABS de 5,0x10,0x1000 mm
1 x	Conector DEANS hembra 30 cm
1 x	Perfil de ABS triangular 2.0x1000 mm 90º
1 x	Perfil de ABS rectangular 12x6,0x1000 mm
1 x	Perfil goma 6-2 mm 2M
1 x	Perfil goma 10-2 mm 2M
1 x	Cable servo PREMIUM 200m (blanco/rojo/azul)

4,731.29EUR