Inicio » Catálogo » UNILIHGT » UNDUAL110802GW

33.00EUR

8Wx2 Navigation & Strobe, 11mm Green/White
[UNDUAL110802GW]

8Wx2 Navigation & Strobe, 11mm

Powerful position and flash light in a housing. The profile light of the 11mm series is slim outside and fits optically also onto smaller models. Due to efficient LED emitter, the light has an enormous luminous power despite the compact dimension and thus it's also suitable for bigger models. The innovative, internally positioned cooling surface enables astonishingly compact dimensions with a unique slim design.

In delivery state, the profiled polycarbonate cap is simply attached. It can be varnished separately. It's highly transparent and unbreakable. The assembly of the lamp is astonishingly easy: With a simple surface mount, all you need is a slit of 3x28mm. In this way, the luminaire can be also mounted on smaller wing tips or fuselage. If desired, you can recess the luminaire up to 4mm, thus achieving an even smaller construction. The cap must be glued after the final assembly.

The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be used. Alternatively you can use a 4W-3S adaption cable. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Please check operation temperatures after installation.

Technical Data
Electricity: 4W GREEN and 4W WHITE reference power, 8(12)V, 2x0.7A
Beam angle: >160°
Light intensity: ~500 Lumen RED
Light intensity: ~70 Lumen GREEN
Light intensity: ~140 Lumen WHITE
Dimension assembly pin: 3x28x15mm
Dimension light cap: 11.5x42.5x10mm, up to 4mm lowerable without loss of beam angle
Total mass: 11.5x42.5x70mm
Weight: 9g (without cable)
Delivery: ready to use with 1m silicon cable and series resistor for 2S operation, resistor for 3S enclosed

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
2 x	Horn 13,5x16 mm (2 pcs)
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn aluminio RH largo (2pcs)
2 x	Acople ALU M3 Ø 5 (2 uds)
2 x	Conjunto de mandos arriostrados
3 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Horn aluminio roscado 6 mm con rótula
2 x	Horn de mando 6/35 con rótula M3
2 x	Acople ALU Izda. M3 Ø 4 (2 uds)
2 x	Horn aluminio pequeño rojo (2pcs)
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Horn de mando 6/27 con rótula M3
1 x	Acople ALU M3 Ø 6 (2 uds)
2 x	Acople ALU M2 Ø 3 (2 uds)
2 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Cable con accesorios
1 x	Horn corto de latón M3 para cable (2 pcs)
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
2 x	Horn control flaps (1 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Fibra carbono tela 160g/m2 100 cm x 5 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Fibra carbono tela 160g/m2 127 cm x 1 m
2 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m
3 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
2 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	Fibra carbono tela 160g/m2 100 cm x 10 m
1 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Chaqueta Hispano Aviación
1 x	Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
1 x	Cable servos PVC 0,14 mm2 Graupner (100 m)
1 x	Cable pull pull SUS 3m + cierres
1 x	Cierre cabina
1 x	Anclaje cabina en L "tipo F3A" (2 pcs)
1 x	Destornillador allen "Hex" Ø 2.0 molibdeno
1 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Conector banana oro 3 mm
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Arandela conica alumino M3 azul (8 pcs)
1 x	Varilla acero Ø 7,0 mm x 1000 mm
1 x	Camara USB micro endoscopica
2 x	Horn mando long (2 pcs)
2 x	Horn micro type4 Ø 0,5(2 pcs)
2 x	Horn largo de latón M2 para cable (10 pcs)
3 x	Horn extra largo 60x30
2 x	Horn de mando variable 6 mm M3
3 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Horn micro T2 Ø 1 (2 uds)
3 x	Set acople ALU M2,5 Ø 4 (2 uds)
1 x	Horn de mando duraluminio F3A 30x10x23,5 mm (2 pcs)
1 x	Horn de mando variable inclinado 5 mm M2
1 x	Horn metálico ajustable rosca M3
3 x	Horn largo 50x26
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
3 x	Horn mando DU-BRO 1/2 (2 pcs)
2 x	Horn DUBRO 1/2A
1 x	Horn de mando largo extrafuerte con rodamiento 2,8x34
2 x	Horn micro (2 pcs)
1 x	Horn de mando medio extrafuerte con rodamiento 2,8x24
1 x	Horn aluminio LH largo L31xH30 (2pcs)
2 x	Horn de mando variable inclinado 6 mm M3
1 x	Horn largo de latón M2 para cable (2 pcs)
1 x	Horn con ball 55x40
1 x	Horn de mando pequeño ajustable aluminio con rodamiento 2,8x15
1 x	Horn de mando variable 5 mm M2
2 x	Horn de mando 5/20 con rótula M2
3 x	Horn mando small (2 pcs)
1 x	Fox MDM 1 4000 mm DeLuxe,Set instrumentos frontales scale FOX
1 x	BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	ASH 31 Mi Scale:1/3 - 7m, elevador
2 x	Rodillo teflon 40 mm x 15 mm Diam.
1 x	Plancha carbono 550x350x1.5 mm ECOTECH
1 x	Plancha carbono 500x400x2.0 mm ISOTECH
1 x	FOX MDM-1 3.500 mm ARF White
1 x	LO 100 ARC 3.3m,marco cabina
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	Plancha de goma espuma (310x210x2 mm)
1 x	Fox MDM-1 ARF 3.5m Orange
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Instrumentos individuales 1/4 Planeador
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
1 x	GP 15 JETA
2 x	Plancha estireno 320x120x0.5 mm
1 x	Plancha fibra vidrio 350x150x2.0 mm
1 x	Plancha carbono 550x350x4.0 mm ECOTECH
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x	Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x	DG-303 ACRO 3750 mm, winglets
1 x	Fox MDM 1 4000 mm DeLuxe
1 x	Fox 4000 mm con flpas (Airwold)
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	Plancha de goma espuma (310x210x8 mm)
1 x	Plancha fibra vidrio 350x150x0.5 mm
1 x	Fournier RF-4D
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Plancha carbono 350x150x1.5 mm
1 x	Plancha fibra vidrio 350x150x0.3 mm
1 x	Plancha de goma espuma (310x210x3 mm)
1 x	Aero frenos eléctricos para veleros 250 mm (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Horn de mando corto con rodamiento (2 pcs)
2 x	Reenvío de Profundidad 90x28 mm "tipo Kato"
1 x	Turbina PBS TJ 40-G2
1 x	Horn de mando largo ajustable con rodamiento
1 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Horn de mando largo ajustable aluminio con rodamiento 2,8x24
1 x	Horn de mando extra-largo ajustable aluminio 2,8x34
1 x	Horn con ball 40x30
1 x	Horn corto de latón M4 para cable (4 pcs)
2 x	Horn de control para SlowFlyer (3 pcs)
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Horn de mando largo con rodamiento (2 ud)
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Soporte reenvio para freno retractil
1 x	Avanti S 2.3m Jet BLANCO/AZUL (SebArt)
1 x	Fascination 3600 mm (Top Model)
1 x	Aero-Master Cabina (Aero-naut)
1 x	LO 100 ARC 3.3m
1 x	Avanti S 2.3m Jet AMARILLO/NEGRO + Tren retráctil (SebArt)
1 x	Gobe R-26S (Airwold)
1 x	Avanti XS Jet, Soporte fuselage (SebArt)
1 x	Rodillo teflon 80 mm x 15 mm Diam.
1 x	Plancha PVC 320 x 194 x 0,23 mm (marrón)
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Plancha carbono 350x150x1.0 mm
1 x	Masilla fina fina blanca, 1 kg Colormatic 2K
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	BETA 1400 RTF Red
1 x	Reenvío de Profundidad 70x28 mm "tipo Kato"
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Plancha contrachapado Abedul 600x300x2,5 mm
1 x	Terminales riostras M2 (10 uds)
1 x	Portapalas metal LAMA
1 x	Adaptadores carga 6s JST-XH
1 x	Fibra vidrio 80g/m2 (100cm x 5m) cruzada
1 x	Plancha termoformable 0,5 mm (0,02") DIN A4
1 x	Fibra vidrio trenzada "manga" 45 mm x 20m
1 x	Peel Ply liso 95 g/m2 100 mm x 100 m
1 x	Plancha termoformable 0,1 mm (0,004") DIN A5
1 x	Cargador Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Eje rueda con accesorios
1 x	Tren retráctil veleros 12-25 Kg 2-2.8 (sin rueda) 165 mm
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White

45,807.80EUR