Top » Catalog » PILOT RC » PILOTPITTS8703

1,559.99EUR

PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
[PILOTPITTS8703]

Pilot-RC’s first ever biplane! And it could be no other than the classically beautiful Pitts Challenger.
Fear not about long setup times of traditional biplanes, Pilot-RC’s innovative and patented systems allow you to have the model completely put together in under 5 minutes, to then unleash the acrobatic and 3D monster that our Pitts.

FEATURES:
NEW! Pilot-RC’s first ever biplane! Years of experience poured into a new design SPECIAL NEW! Pilot-RC new and patented quick release system for fast wing mounting at the field.
Special Pilot-RC no screw canopy. Quick release with new security latch design.
Strong but light, specially developed for precision acrobatic and extreme 3D flying
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no external screws exposed
Removable wings , wing stut and stabs.
Laser engraved motor mounting position

INCLUDED HARDWARE:
Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pushrods with ball links
Matching carbon spinner

REQUIRED HARDWARE
Motor: 100-120cc
Servos: 7-8 high torque plus throttle // Uses x1 per aileron (total x4), x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories…

SPECIFICATIONS:
Model: Pitts Challenger
Wingspan: 87″ (2,200mm)
Length: 79″ (2,000mm)
Wing area: 2,265 “² (1,465 cm²)
Weight: 29.4lbs (13.4kg)

under request

Reviews

Quick Find

Shopping Cart

1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Couple M4 for wire (10 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Cable coupler M2 (10 uds)
1 x	Cable coupler M3 (10 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
2 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	4 mm M3 red control terminal (4 pcs)
2 x	Cable coupler M3 (10 uds)
2 x	Kwik link with arm M5xM2,5xL30
2 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Cable coupler M2,5 (2 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Angled clevis with threaded rod M3
2 x	Kwik link with arm M3xM2xL24
1 x	Metal clevis M2 (10 uds)
2 x	Metal clevis M2,5 (10 uds)
1 x	Cable coupler M2 (10 uds)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
2 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	5 line servos wire black (1 m)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	White silicone 0,25 qmm wire (100 m)
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Ø 0,5 mm Pull-Pull Kevlar Line (3 m)
2 x	Tape GFK 50 mm
1 x	Pulley brass 14/2 (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Spikes Band (5 m)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x
1 x	Pulley brass 12/2 (2 pcs)
1 x	Black large kwik link (10 pcs)
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
2 x	Marker ties (20 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	Micro clevis (10 uds)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Rubber bushing with bracket "B" type (2 pcs)
2 x	SE Ring 240 mm (2 pcs)
1 x	Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Oracover Yellow CUB 2 m
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Stainless steel 3 m Pull-Pull complet set (max 20 kg)
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Cable coupler M2x66 (2 uds)
2 x	Gates hinge aluminium (1 pcs)
1 x	Connector CAN 15
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Silicone red 4,0 qmm wire (25 m)
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Support pumb/filter Xicoy X45
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	20x200 mm battery rings
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x	Astra wing Joinner (Top Model)
1 x	ASW 20 5000 mm with winglets (Airwold)
1 x	Fournier RF-4D
1 x	Ion Pro NG electric with flaps ORANGE (JP Model)
1 x	Gear set HITEC HS-81
1 x	Blue aluminium double servo arm V3-Hitec 3,5inch
1 x	Fascination 3600 mm (Top Model)
1 x	Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x	Challenger ARF (Top Model)
1 x	Servo HITEC D954 TW
1 x	Fox 4000 mm with flaps (Airwold)
1 x	Flip ARF (Top Model)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Gear set HITEC HS-125MG/5125MG
1 x	FOX MDM-1 3.500 mm ARF White
1 x	Servo HITEC D645 MW
1 x	Fox MDM-1 ARF 3.5m Orange
2 x	10-15mm Servo Arm HITEC
1 x	LO 100 ARC 3.3m,frame canopy
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Servo HITEC D950 TW
1 x	Fox 4000 mm Airworld,canopy frame
1 x	Gear set HITEC HS-55
1 x	ALBATROS 3.0 m (orange/white)
1 x	Elevator VENTUS 2cx 4.5m
1 x	Servo HITEC D131 MW nano
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	FOX 3000 mm, Fuselage (FMS)
1 x	Servo case HS-225MG/225BB/5245MG
1 x	Carbon plate 350x150x3.0 mm
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	IKURA 4.0 m
1 x	HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x	Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x	LS-8 GFK 6m Glider
1 x	Fox MDM 1 6000 mm
1 x	Fascination 3600 mm, Canopy (Top Model)
1 x	DG-303 ACRO 3750 mm (Airworld)
1 x	X-RAY Micro QR (Fuselage with canopy)
1 x	Glider PIROL
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Long pinned hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Partall paste 650 g
1 x
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Universal Colour Paste white 50 g
1 x	Jeti Black cap
1 x	DINO Glider ARC
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	2,3 mm Prop Drive Günther M4
1 x	2 mm Prop Adapter M5
1 x	3 mm Long Prop Adapter M5
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 3,2 mm M8
1 x	Locking cable tie 2.5x100 (uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	RANGER Jet Red/Yellow 1.854mm combo
1 x	10-15mm Servo Arm
1 x	Suncover 100cc Red
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
1 x	Servo HS-7980TH digi high voltage ultra torque
1 x	VIPER JET G2 Esq. 2 White/Red
1 x	Propeller POWER-PROP 7x7
1 x	Servo HITEC HS-785 HB
1 x	HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x	Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser
1 x	Servo HITEC HS-7954 SH Digital High
1 x	Swift S1 De-luxe JEPPESEN 3.140 mm
1 x	Servo HITEC HS-65 MG
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	Ventus 2cx 4.5 m Cabling wings
1 x	Servo HITEC HS-70 MG
1 x	KingTech Turbineoil 5L
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	VIPER JET G2 Esq. 2 Red/White/Silver
1 x	Clamp K30 G3
1 x	Turbine KINGTECH K160 G4

36,659.48EUR