Top » Catalog » Xicoy Turbine » XIX132Light

2,425.03EUR

Turbina X132 H "Light Version"
[XIX132Light]

The X132 has same lightweight electronics as all other Xicoy engines that allow simple installation and of course it incorporates our FlexThrust Technology giving you anywhere from 60N to 132N at the press of a button. The X132 is perfect for all those popular models that need engines in the range of 60N to 132N. Plenty of kits available to chose from that are of a affordable and practical size. Having an engine that can be used on all of them, the investment on a X132 is a perfect, long term,decision!!

Specifications
Weight: 940g (2,1lb) engine, 1.140g (2,5lb) total installed weight except battery
Thrust: Continuously adjustable from 60 to 132N (29.7 Lbf, 13,5Kg )
Telemetry: Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum (optional modules)
Starter motor: High speed brush-less
Size: 90,2mm diameter, 198mm long
Service interval: 25 hours
Rpm Range: 40,000 ... 150.000 RPM
Reccomended battery: 2s Lipo/2200mAh reccomended. (3s Life compatible).
Battery not included
Other: Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance
Idle Thrust: 4,9N (0,5kg/1,1Lbf)
Fuel: Kerosene + 4% oil. Diesel allowed but not reccomended. Fuels containing Biodiesel not allowed.
Fuel pump: Digitally controlled brush-less pump
Fuel consumption: 360g/minute at 132N. (436ml/min)

under request

Reviews

Quick Find

Shopping Cart

1 x	12 mm floating pad (49 pcs)
1 x	Blind nut M8 (10 pcs)
2 x	Anodized aluminium servo M3x16 screw (4 red pcs)
2 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
2 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
3 x	Aluminium wide washer M3 red (4 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
2 x	Aluminium wide washer M3 blue (4 pcs)
1 x	10 mm floating pad (72 pcs)
1 x	Blind nut M4 (4 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
2 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium M2x12 mm screw (4 pcs)
2 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
2 x	Aluminium wide washer M4 Red (4 pcs)
1 x	15 mm floating pad (30 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Blind nut M3 (4 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
2 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	1/6 Pilot "Garry"
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
2 x	Piloto Jet "Green" 1/6 Scale
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Pilot JAN 1/4 Saiplanes
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Piloto jet 130 mm
2 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	1/10 Pilot "Jimmy"
2 x	1/12 Pilot "Fighter"
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	1/10 Pilot "Jack"
1 x	1/4 Pilot "Mike"
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	1/4 Pilot "Heidi"
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Piloto JET 1:3,5
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Pilot "Goose" (Slimline)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Pilot "Anthony" (Slimline)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	1/12 Pilot "Cougar"
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	1/6 Pilot "Tony"
2 x	1/7 Pilot "Japanese"
2 x	Bungee HLG Premium
1 x	Vasa model Catapult
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	SERVO HOLDER
2 x	Tape GFK 25 mm
2 x	20x200 mm battery rings
1 x
1 x	SE Ring 200 mm (2 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
2 x	Fixed launching hook
1 x	Tape GFK 50 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	Tape GFK 38 mm
1 x	SE Ring 350 mm (2 pcs)
2 x	Towing hook
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Foil for sticking flaps and ailerons
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Marker ties (20 pcs)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Socket head ball link M3 (2 uds)
1 x	MYLAR film A350 (1000x500 mm)
1 x	Round Rod 6,0x1000 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	XH male balance (4S) connector (2 pcs)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Windsock Ozone L -1200 mm
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Servo HBS 690BB HV Digital
1 x	Nylon Screw M6x40
1 x	USB programador GO servos
1 x	Aluminium servo arm (2 uds)
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Treaded hexagonal socket insert M4 Br (4 pcs)
1 x	Floating M3 washer pad (36 pcs)
1 x	1/6 Pilot "Buddy"
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Adjustable launching hook
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Blade holder metal LAMA
1 x	SAVOX SH 0254 servo
1 x	Propeller 8x4 Electric
1 x	Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x	GPS Logger Dymond
1 x	DPSI magnetic switch actuator (PCB)
1 x	DPSI Ampere & Voltage bundle
1 x	Towing hook <3m
1 x	DPSI 2001 RV
1 x	DPSI OCP Overload protection
1 x	DPSI RV Mini 5 (2008)
1 x	DPSI Micro MPS
2 x	Servo-V-Limiter 5.2V
1 x	LOWER TOW HOOK
1 x	DPSI Micro - RCS RV
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	6,4x1000 mm 2:1 red termoretract tube
3 x	Extractor piñones 2.3/3.2 mm
1 x	Propeller 9x4,7 SlowFlyer
1 x	76 mm light wheels (2 pcs)
1 x	Propeller 3x3
1 x	Cooler motor type 150
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	SE Ring 360 mm (2 pcs)
1 x	DUPLEX 2.4EX RC Switch
1 x	GPS, Vario and altitude Sensor SBS-01G
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Switch magnet for gas cap and magnet switch actuators
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Emcotec SPS Magnetic Switch Actuator
1 x	DPSI LR-S (with push buttons)
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	EWC3 100 cm wing connector
1 x	GPS Expander Module
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	Heat sink for Optotronix LEDs
1 x	Backmountset complete A40
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	Swing 1000
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	Epoxy 5 min. 500 g (Resin)
1 x	KOLIBRI 90 LV-I Esc
1 x	Epoxy QUIK-CURE™ 5 min (260g)
1 x	Epoxy 5 min. 500 g (Hardener)
1 x	Epoxy 30 min. 200g
1 x	JIVE 80+HV Esc
1 x	Turbina XICOY X95 compact
1 x	Hopper 125 ml XICOY with support
1 x	Program Card KAVAN ES
1 x	Program card KAVAN PRO
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	JIVE 80+LV Esc
1 x	Epoxy MID-CURE™ 15 min (130g)
1 x	JIVE 120+HV Esc
1 x	Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x	Epoxy 40 min (Resin). 25Kg
1 x	Esc KOSMIK 160+ HV COOL
1 x	Esc KOSMIK 200+ HV
1 x	Epoxy 40 min (Resin). 5 Kg
1 x	Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Turbina X45 H "Light Version"
1 x	Turbina X132 H "Compact Version"
1 x	Turbina XICOY X180 light

17,478.21EUR