Top » Catalog » Aero-naut » AE725173

21.00EUR

Z Spinner (CN) 35mm
[AE725173]


The spinner series for aerodynamic top performance.
The Z spinners combine the advantages of the CN spinners (Cool Nose with cooling air openings) and the cranked Z center pieces. Due to the angled aluminum center pieces, the folding propeller blades lie even closer to the fuselage and thus ensure less drag during gliding. The spinners with the center pieces are designed for slim electric glider hulls, but can also be advantageous for wooden hulls in box construction, for example, if they are ground round.
The center pieces of the spinner sizes 32-42mm are interchangeable, for example 38mm spinner caps can be operated with the center piece of the 42mm spinner. These possible combinations result in further potential for optimization, since finer tuning to the respective fuselage is possible. The 30mm spinner has its own center piece that cannot be combined with the other spinner caps.
The Z-Spinner contains a spinner cap (diameter 38mm) made of white plastic (very easy to paint), milled aluminum center piece with integrated mount for the clamping cone, special prop rubber for folding the propeller blades, assembly screws for spinner cap and propeller blades.
The diameter of the spinner cap is 38 mm. The center distance (d) of this spinner is 32 mm. This means that the diameter of the propeller blades is reduced by 10mm (0.39″). Example: A propeller with a diameter of 12″ has an effective diameter of 11.61″ at this center piece (the size specifications for folding propellers always refer to the use of a center piece with a center distance of d=42 mm).
The following, suitable collets are required for this spinner series:
Clamping cone motor shaft 2.0mm – order no. AE712300
clamping cone motor shaft 2.3mm – part no. AE712301
Clamping cone motor shaft 3.0mm – part no. AE712302
clamping cone motor shaft 3.2mm – order no. AE712303
clamping cone motor shaft 4.0mm – order no. AE712304
Clamping cone motor shaft 5.0mm – part no. AE712305
clamping cone motor shaft 6.0mm – order no. AE712306

The spinner caps are available individually as spare parts in all sizes:
Spinner cap 30mm – Order no. AE725181
spinner cap 32mm – order no. AE725182
spinner cap 35mm – order no. AE725183
spinner cap 38mm – part no. AE725184
spinner cap 40mm – order no. AE725185
spinner cap 42mm - order no. AE725186
The prop rubber for this spinner is available as a spare part under item number AE725166.


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Emisora Spektrum NX10 10ch (solo Tx)
Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Pine wood slat 3.0x5.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
2 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Adapter lead MPX/XT60
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x CM-3
1 x Adapter lead MPX/EC3
1 x Circlick securite
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Pine wood slat 10x10x1000 mm
1 x APM2.6 Power module with 5.3V DC BEC
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x BALSA leading edge 8x10x1000 mm
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Cabel charger transmitter GRAUPNER
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x CC 05
1 x BALSA triangular 6x6x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
2 x BALSA triangular 15x15x1000 mm
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Liston HAYA 8 x 8 x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
2 x CC 03
1 x Beech dowels 10 mm x 1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
2 x 3 LiPo XH>EH adapter
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x USB HLS prog. interface
1 x Dean "T" - Futaba Adapter
2 x JETImodel SINGLE BEC
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x BALSA trip 2.0x10.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x BALSA trip 6.0x6.0x1000 mm
1 x TrainerCord (master-learner)
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
2 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Beech dowels 4.0 x 1000 mm
1 x BEC 3A FOXY
1 x CC 02
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x 
2 x SE Ring 450 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 350 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Spikes Band (5 m)
2 x SE Ring 480 mm (2 pcs)
1 x Cinta Goldfix 1m
1 x SE Ring 240 mm (2 pcs)
1 x Tape GFK 50 mm
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x 20x200 mm battery rings
1 x Xplorer2 anemometro
1 x U Profile ABS 8,0x4,0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Vacuum bag, 1200 mm x 50 m
2 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x ABS angle 3,0x3,0x1000 mm
2 x U Profile ABS 5,0x10,0x1000 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x ABS "T" angle 8.0x8.0x1000 mm
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x U Profile ABS 3,0x6,0x1000 mm
2 x T-Connector 4.0 mm x 1000 mm
2 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x Profile ABS Square 3 x 1000 mm
1 x Pilot "Duke" Legends Series (Slimline)
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x 25 mm reinforced hinge
1 x ABS tube 18.0x16.0x1000 mm
1 x 12V Car Adapter
1 x Horn 13,5x16 mm (2 pcs)
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x DPSI Ampere battery backer
1 x JETImodel Addcap 1640
1 x BALSA trip 10x10x1000 mm
1 x Cabling for Fox MDM1 wings
1 x SBEC 30 D
2 x BALSA trip 5.0x5.0x1000 mm
3 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Extension 5 lipos JST - JST/C
1 x MAX BEC
1 x UBEC 6A KAVAN
1 x Long Switch On/Off micro
1 x Interruptor RX/Batterie
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Ring 320 mm length (5 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x SE Ring 300 mm (2 pcs)
2 x Xplorer3 anemometro
1 x Xplorer4 anemometro
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x 20x1000 mm Ring Strap Back To Back
1 x SE Ring 360 mm (2 pcs)
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Profile ABS half cane 4x1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x 1/12 Pilot "Tom"
1 x 1/6 Pilot "John"
2 x 1/10 Pilot "Jimmy"
2 x 1/12 Pilot "Langley"
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Carbon plate 350x150x0.5 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x ABS angle 2,0x2,0x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Fiberglass 280 g/m² 5000x1000 mm
2 x Carbon roving DowAksa / 24k / 1600 tex
1 x Carbon plate 350x150x1.0 mm
2 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Chopped glass fibre strands 3 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Glass fibre sleeve Ø 20 mm
1 x Chopped glass fibre strands 3 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Motor DLE 200cc Premium Muffler
1 x Motor DLE 170 M- Paramotors
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Dummy motor GPW Wasp Scale 1/4
1 x 25 mm Sandpaper file
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Foam plastic plates (310x210x2 mm)
2 x ABS 500 x 400 x 1 mm (white)
2 x Carbon plate 350x150x4.0 mm
1 x Chopped glass fibre strands 0.2 mm
1 x ABS 500 x 400 x 0,5 mm (white)
1 x Fiberglass plate 350x150x0.5 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x 4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x 110x55 mm SLH KOVO wheel
2 x 35x14 mm hard foam KOVO wheel (2 pcs)
1 x 20 mm tail wheel for 0,5-1 Kg models
1 x Blade holder lower
1 x 4 mm Prop Adapter M6
2 x 3 mm Prop Adapter M6
1 x Screw M3x16
2 x Cierva C30 Body Spain
2 x Head upper part
1 x Screws M1,6x6 Allen
1 x 4 LiPo XH>EH adapter
1 x Rotorshape Autogyro
1 x 5 LiPo XH>EH adapter
1 x 6 mm Prop Adapter M8
1 x Tirpiz Battleship 1:200
1 x SCHARNHORST accessories
1 x Aero-Master Cabine (Aero-naut)
1 x Dumper propeller 6/8 mm
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x Prop Shaft Adapter 5 mm/M8 "long"
2 x MG cannon 1.8 cm (5 pcs)
1 x 5 mm Prop Adapter CN-Spinner
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
2 x 6 mm Prop Adapter M8
1 x 3,2 mm Prop Adapter M8
2 x 2 mm Prop Adapter M6
2 x 5 mm Prop Adapter M8
2 x 2,3 mm Prop Adapter M6
2 x 2,3 mm Prop Adapter M6
1 x 3.2 mm Prop Adapter M6
1 x 3.2 mm Prop Adapter M8
1 x SCHARNHORST Battleship 1:200
1 x Prop Shaft Adapter 8 mm/M12 "long"
2 x 4 mm Prop Adapter CN-Spinner
1 x 4 mm Prop Adapter M8
1 x Stick coupler Ms 15 mm
1 x 500 ccm gasoline fuel tank
1 x FIALA Propeller 20x8
1 x FIALA Propeller 18x8
1 x Propeller MEJLIK 28x10
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Propeller MEJLIK 18x8 CFK
1 x 1/12 Pilot "Cougar"
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x 1/4 Pilot "Heidi"
1 x 1/6 Pilot "Tony"
1 x Fiberglass plate 350x150x2.5 mm
1 x Fiberglass plate 1200x1000x0,2 mm
1 x Fiberglass plate 620x540x3,2 mm
1 x Propeller MENZ-S 18x6
1 x Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
2 x Steering lever
1 x 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x FIALA Propeller 24x12
1 x Spare Shaft Ø4mm L:450x23mm M4
1 x Kardan Black (without pinions)
1 x G-Ring Ø3mm Ø3xØ6x3 mm
1 x Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x Propeller MEJLIK 24x10 TH
1 x Helice APC 14x4 W
1 x Profile ABS half cane 8.0x1000 mm
1 x Propeller APC 10x4 Glow/Gas
1 x Propeller APC 12x10 Glow/Gas
1 x Propeller MEJLIK 16x11 3 Blades
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Piloto Jet "Green" 1/6 Scale
1 x Piloto JET 1:3,5
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x 1/6 Pilot "Garry"
1 x 1/7 Pilot "Japanese"
1 x Shirt Hispano Aviación
1 x Softshell Hispano Aviación
1 x Vest clothes Hispano Aviación
1 x RX cabel
1 x Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x Fiberglass 5000x1100 mm 49 g/m²
1 x Propeller MENZ-S 15x8
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Propeller MENZ-S 17x6
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x FALCON 24X9 CARBON PROPELLER (GAS)
1 x Propeller MENZ-S 15x8 3 blades
1 x Propeller MENZ-S 20x6
1 x Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x FALCON 28X10 CARBON PROPELLER (GAS)
2 x Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm
1 x Lightweight aircraft wheel, 45x18.5x2
1 x 10 mm Prop Adapter M12
1 x Propeller MENZ-S 20x8
1 x 3,2 mm Prop Adapter M6
1 x 11x7 tree blades propeller
1 x Propeller MENZ-S 20x6 Pusher
1 x Capstan of plastic 88x30x36 mm
1 x Propeller MENZ-S 15x6
1 x Klumpblock (Plastik), Höhe 8 mm, 2 Rille, 20 Stück
1 x Komet Pump
1 x Canadair CL-415 (aero-naut)
1 x Raer wall
1 x Baering 3x8x4
1 x Propeller Pleg CAM Carbon 13x6.5
1 x Propeller Pleg CAM Carbon 10x6
1 x Blade holder center
1 x Nut M2
1 x Propeller Pleg CAM-Prop 8x6
1 x 30 cm BEC cable (female)
1 x Hacker X-Pro USB interface V2
1 x Magnetic Interruptor MULTIPLEX
1 x USB interface ALTIS
1 x Female connector for 12 pines AWG
1 x Pins M connect Multipin connectors AWG 20-24
1 x PowerBox SparkSwitch RS
1 x Deposito combustible tipo "turbina" 330 ml
1 x Spinner propeller pleg. 45 mm / 5 mm
1 x Transom 59x46 mm
1 x Z Spinner (CN) 32mm
1 x Doppelpoller 17 mm (6 uds)
1 x MPS Gas-Cap-Powerswitch
1 x Cap closure 33/23.5mm (2 uds)
1 x 3,2 mm Prop Adapter M6
1 x 5 mm Prop Adapter M8
1 x Central piece 52 mm 0º
1 x Central piece 52 mm - 5º
1 x 75 mm
1 x BABY glider drawings (Aero-naut)
1 x Ancla Met. 16 mm (5 pcs)
1 x Antenna 50 mm (2 uds)
1 x Piloto Jet "Red" 1/6 Scale
1 x 45x19 mm hard foam KOVO wheel (2 pcs)
1 x 60x25 mm tail wheel "type F3A"
1 x Foam wheel Ø 351 mm (2 pcs)
1 x 32x9 mm foam standar KOVO wheel (2 pcs)
1 x Rubber wheel Ø 50mm x 24mm (2pcs) axis Ø 3.1m
1 x Wheel 18 mm
1 x Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm
1 x 76 mm light wheels (2 pcs)
1 x Lightweight aircraft wheel, 50x18.5x3
1 x PU aircraft tyre, 45x16x3 mm
1 x 100x50 mm SLH KOVO wheel
1 x Pump 12 V
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x Propeller MENZ-S 18x10
1 x 15x7 tree blades propeller LEFT
1 x 3 mm Leader (L 100 mm)
1 x Program card KAVAN PRO
1 x Cabestrante 13 x12 mm (5 pcs)
1 x 12 mm portholes (10 pcs)
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x Bearing 3x6x2,5
1 x Propeller Pleg CAM Carbon 15x10
1 x GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x Spinner propeller pleg. 38 mm / 4,0 mm
15,530.35EUR
Manufacturers
Manufacturer Info
- Aero-naut Homepage
- Other products
Notifications
NotificationsNotify me of updates to Z Spinner (CN) 35mm
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce