1 x | 5 mm M2 variable horn |
1 x | Cable control set |
2 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Brass control horn M2 long for wire (10pcs) |
2 x | 6 mm M3 variable horn |
1 x | Horn 5/20 with M2 Bearing |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | 20 mm carbon horn |
1 x | Cable with accesories |
2 x | Horn 6/20 with M3 Bearing |
2 x | Horn mando small (2 pcs) |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | Horn for flap control (1 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
3 x | Control horn long w/ball |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Horn 5/10 with M2 Bearing |
2 x | Horn F3A de Titanium 16 mm (2 units) |
3 x | Brass control horn M2 large for wire (2pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Horn 5/15 with M2 Bearing |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Horn mando long (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Adjustable brass horn threaded M3 |
2 x | 6 mm aluminium horn with patella |
1 x | Horn 6/35 with M3 Bearing |
1 x | Jeti Black cap |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | Connectors banna oro 2 mm (M/F) (ultralight) |
3 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
2 x | Conector BEC female (10 pcs) |
2 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Gold antispark 5,5 mm plug |
2 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors banna oro 8,0 mm (M/F) |
3 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Extra long horn 60x30 |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | XH male balance (2S) connector (2 pcs) |
2 x | XH female balance (4S) connector (2 pcs) |
1 x | Connectors DEANS (T) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Gold antispark 4 mm plug |
3 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | 30 cm DEANS female connector |
1 x | Connectors banna oro 3 mm (M/F) |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Horn DUBRO 1/2A |
1 x | Horn with ball 40x30 |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
2 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | ABS tube 7.0x5.0x1000 mm |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
2 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | ABS tube 6.0x4.0x1000 mm |
1 x | Digital scale up to 40 kg |
1 x | |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Cut tube |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Ball Link Plier |
1 x | 2,0x50 mm allen screwdriver |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | Concave-Convex sandpaper file 13 mm |
1 x | Copier 5x20 cm pcs |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Crimping tool |
2 x | |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | 2,5x60 mm allen screwdriver |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
2 x | EC-Cutter |
1 x | 55% silver electrodes (2 pcs) |
1 x | Copier 2x20 cm pcs |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Dean-T Plug Mold |
2 x | |
1 x | 3,0x60 mm allen screwdriver |
1 x | Small aluminium horn red (2pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | 30 cm MULTIPLEX female connector |
1 x | Connector CAN 15 |
1 x | Conector MT-60 (pair) |
1 x | Small aluminium horn gold (2pcs) |
1 x | PIN Connector female (100 pcs) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Rudder forward 80x28 "type Kato" |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | MPX screwable clips (5 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Horns indoor |
2 x | Short adjustable control horn 3x24 |
1 x | Indoor hinge with servo arm integraded |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
2 x | Horn with ball 55x40 |
1 x | 100 Newtons FEMA absorber |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | 16mm Gear-Spotlight, 4W |
1 x | DPSI RV Mini 6 Magic |
1 x | Filter Capacitor JR |
2 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | OPTOTRONIX Aurora LCU |
1 x | Switch magnet for gas cap and magnet switch actuators |
1 x | Landing lights 18 mm (0.71in) |
1 x | DPSI OCP Overload protection |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Micro control horn T2 Ø 1 |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Nitroverdu 500 ml |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Heat sink for Optotronix LEDs |
1 x | 1/6 Pilot "Garry" |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Combo lighting module with covering drop shape |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | 1/4 Pilot "Heidi" |
1 x | Resistor 3W 5% OR47 |
1 x | 25 mm carbon servo arm |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | 1/6 Pilot "John" |
1 x | 1/4 Pilot "Mike" |
1 x | 110x55 mm SLH KOVO wheel |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | LED wire (green - 2pcs) |
1 x | Steel brush wheel with 2.35mm |
1 x | LED blink wire flashing (blue - 2pcs) |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Tachometer Hyperion Multi-pala |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
2 x | Medidor ángulos y/o incidencias |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | 12x6 tree blades propeller |
2 x | 15x7 tree blades propeller |
2 x | 16x10 tree blades propeller Master Airscrew |
1 x | FIALA Propeller 23x8 Electric |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | 76 mm light wheels (2 pcs) |
1 x | Retract undercarriage |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | Z Bender - S Type Tool |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | 14 mm Portholes for screws (10 pcs) |
1 x | 28 mm turnbuckle |
2 x | 12x8 tree blades propeller |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | Servo NARO Max Std |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | 12 mm portholes (10 pcs) |
1 x | 3 mm Leader (L 100 mm) |
2 x | 2.3 mm Adapter for 30 mm spinners |
2 x | 29,0 mm propeller (rigth propeller) |
1 x | Cooler motor type 150 |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Connectors MPX black female |
1 x | SKY RC T400Q Charger 4x100w |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | XT-60 connector (female) |
1 x | XH LiPo extension lead |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | Connectors MPX male |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Optotronix Aurora Plug |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Magnetic Connect locking system |
1 x | Carburetor DLE 30 |
1 x | Motor EME 60 cc with electric starter |
1 x | Pick up EME 55/60 cc |
1 x | Carbon plate 350x150x1.5 mm |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | LA500 front gear holder |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Male connector for 10 pines AWG |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | 35 mm gas motor standoff |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | Dia. 16x35 mm PTFE tube for escape |
1 x | 90° TUBE-ANGLE Ø 28 mm |
1 x | GASKET SET FOR DLE40 |
1 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | 200 Newtons FEMA absorber |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | EDGE 540 1.73m SEAGULL Model |
1 x | COMFORT MOUNT ø 60mm |
1 x | DLE 55 RA pipe plug |
1 x | DA-50R motor alumine support |
1 x | Servo-V-Limiter 5.2V |
1 x | DPSI magnetic switch actuator (PCB) |
1 x | Piston ring EME 35cc |
1 x | Charger SKY RC D200 neo |
1 x | Carbon plate 350x150x3.0 mm |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | LA500 rotor head shaft |
1 x | LA500 Blades |
1 x | LA500 Autogyro |
1 x | Head upper part |
1 x | Head runner |
1 x | Head lower part |
1 x | Bearing housing |
1 x | Head core bushing |
1 x | Blade holder center |
1 x | Blade holder center GFK 0,5 mm |
1 x | LA500 housing-upper cyclic |
1 x | LA500 rotor head core |
1 x | Bearing 3x6x2,5 |
1 x | Complet landing gear |
1 x | Autogyro Cierva C30 Spain |
1 x | Blade holder lower |
1 x | Head core |
1 x | Blades 330mm |
1 x | Cierva C30 simulated motor |
1 x | LA500 pre-rotation gear hub |
1 x | LA500 housing-lower cyclic |
1 x | Head spacer |
1 x | LA500 pre-rotation gear |
1 x | Balls 4 mm |
1 x | Baering 3x8x4 |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | LA500 ciclic lever |
1 x | LA500 pilot-seat set |
1 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | Oracover Azul Cielo 2 m |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Fod Guard 94x32 mm |
1 x | Male connector for 6 pines AWG |
1 x | Fod Guard 67x32 mm |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
2 x | Propeller MENZ-S 20x8 |
2 x | Propeller MENZ-S 15x8 |
2 x | Propeller MENZ-S 17x10 |
1 x | Propeller MENZ-S 17x6 |
1 x | Propeller MENZ-S 20x10 3 blades |
1 x | Propeller MENZ-S 16x6 |
1 x | 24x12 BIELA 3Bl propeller (3-blades) |
2 x | Propeller MENZ-S 21x8 |
1 x | Propeller APC 12x8 Glow/Gas |
1 x | Propeller APC 15x8 Glow/Gas |
1 x | Propeller APC 15x6 Glow/Gas |
1 x | 300x4 mm M4 shaft ship |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 2 mm Prop Adapter M6 |
1 x | Propeller MENZ-S 16x6 3-Blades |
1 x | Propeller MENZ-S 19x10 |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | 26x8 BIELA propeller |
1 x | Propeller APC 16x6 Glow/Gas |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Capstan of plastic 125x72x45 mm |
2 x | 11x7 tree blades propeller |
1 x | Chain 1.5mm x 1m |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Boat with oars 110 mm |
1 x | 10 mm Prop Adapter M12 |
1 x | 16x8 BIELA propeller (3-blades) |
1 x | Propeller MENZ-S 19x12 |
1 x | Propeller MENZ-S 16x12 |
1 x | Propeller MENZ-S 16x10 |
1 x | Propeller MENZ-S 16x10 3-Blades |
1 x | Propeller MENZ-S 15x6 3 blades |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Propeller balancer |
1 x | Angle measurer |
1 x | WingFix ULTRA Black Edition |
1 x | Surface Indicator Gauge Small |
1 x | Field folding model stand |
1 x | Angle of incidence meter |
1 x | 19x8 BIELA propeller |
1 x | Propeller MENZ-S 17x8 |
1 x | Propeller MASTER 5,5x4,5 |
1 x | 26x16D BIELA 3Bl propeller (3-blades) |
1 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | 26x12D BIELA 3Bl propeller (3-blades) |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | Propeller MENZ-S 20x12 3 blades |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | Propeller POWER-PROP 11x9 |
1 x | Propeller MASTER 7x5 |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | 22x12 BIELA propeller (3-blades) |
1 x | Propeller MENZ-S 20x12 |
1 x | 18x10 BIELA 3Bl propeller (3-blades) |
1 x | Propeller MENZ-S 15x10 |
1 x | Propeller POWER-PROP 14x10 |
1 x | Propeller MENZ-S 16x8 3-Blades |
1 x | 20x10 BIELA propeller (3-blades) |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | Propeller APC 16x10 Glow/Gas |
1 x | Propeller APC 12x6 Glow/Gas |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Mahagoni 1.0x100x1000 mm |
1 x | Boat 82 mm |
1 x | 3 mm Prop Adapter M6 |
1 x | Boat 140 mm |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | 25 mm fenders (10 pcs) |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Cancamo con aro 16/6.5 mm (10 pcs) |
1 x | 15x7 tree blades propeller LEFT |
1 x | Cannon 12.7 cm (2 pcs) |
1 x | 10x7 tree blades propeller |
1 x | Cabestrante plastico 5x6 mm (10 pcs) |
1 x | SAITO FG-36 carburetor |
1 x | ALU double servo arm 3 mm shaft |
|
15,613.70EUR |