Top » Catalog » Extreme Flight RC » EXTR119Y

890.00EUR

EXTRA 300 78" V3 Yellow/Red/Blue
[EXTR119Y]

EXTRA 300 78" V3 Yellow/Red/Blue

DESCRIPTION

From the initial release of the 78 inch Extra 300 in 2009 when our team pilot and good friend Donatas Pauzuolis from Lithuania won the FAI World Airgames Artistic Aerobatic competition with a prototype of the 78" Extra, it immediately found favor within the RC aerobatic community and has remained one of our best selling aircraft. We decided that this iconic airframe deserved an update to bring it up to spec with our other current airframes. Just like our other recent releases there has been some serious weight reduction involving extensive use of composites. The model that we have been flying during testing is a full pound lighter than the previous V2 version that we built and flew extensively during the preliminary testing of the Xpwr motors! What this has allowed is for us to use the Xpwr 35, which allows us to use smaller batteries, contributing to the lower weight. The 21x10 that we use on the Xpwr 35 is still a huge disc on this size model and power is nothing short of ballistic. It is for this reason that we now feel the 78" Extra is THE current sweet spot for super floaty yet aggressive electric 3D flying: Using 2 of the batteries that we all use in our 60" models (6S 3300-4000 mah) we can now experience 5-6 minutes of some of the best aerobatic performance currently available in a gorgeous state of the art 2 meter airframe. Of course the Xpwr 40 is still an excellent choice for this model and we have zero reservations recommending this motor.

The V3 Extra is available in 3 standard Oracover color schemes (not printed), the Jim Bourke Orange/Blue/White scheme, the Yellow/Blue/Red and the Red/Black/White scheme borrowed from our V2 104" Extra. It comes complete with a top quality hardware package and full decal set and now includes a carbon fiber landing gear in place of the original's aluminum gear, a carbon fiber tailwheel assembly, wing and stab tubes..

FEATURES

Wingspan: 78 inches (1980mm)
Length: 76 inches (1930mm)
Wing Area: 1225 sq. in. (7.903 sq. cm)
Weight: 11.5 - 13 lbs. (5,5-6 kg)

In the box

EXTRA 300 78" V3 Yellow/Red/Blue
Hardware package
Decal set
Carbon fiber landing gear
Carbon fiber tailwheel assembly
Carbon fiber wing and stab tube

under request

Reviews

Quick Find

Shopping Cart

1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger transmitter GRAUPNER
3 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	3 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	CC 05
1 x	CM-3
1 x	CC 01
1 x	2 LiPo XH>EH adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	30 cm BEC cable (male)
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CC 03
3 x	JETImodel SINGLE BEC
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
3 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	Dean "T" - Futaba Adapter
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	SE Ring 300 mm (2 pcs)
2 x	ABS Strip 1.5x6.0x1000 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
2 x	Round Rod 3,0x1000 mm
3 x	Round Rod 1,0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
2 x	Round Rod 2,0x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	ABS Strip 1.5x8.0x1000 mm
2 x	Round Rod 1,5x1000 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Strip 2,5x1,25x330 mm
2 x	Round Rod 1,25x1000 mm
3 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 2,5x1000 mm
2 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
3 x	Round Rod 6,0x1000 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Strip 1,5x1,5x330 mm
2 x	Strip 3,5x1,75x330 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	Round Rod 4,0x1000 mm
2 x	SE Ring 200 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
3 x	ABS Strip 1.5x3.0x1000 mm
1 x
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Marker ties (20 pcs)
1 x	Spikes Band (5 m)
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Round Rod 5,0x1000 mm
2 x	Strip 2,0x2,0x330 mm
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	Horn 6/27 with M3 Bearing
1 x	Parachute expulsion foam
1 x	Parachutist
1 x	Oracover CARBON Metalic 1 m
1 x	SPS 70V 140/280 A
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	5 LiPo XH>EH adapter
1 x	DPSI Ampere battery backer
2 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Adapter lead MPX/EC3
1 x	Extension 5 lipos JST/C - JST
2 x	Female connector JST SH 1.0mm with 10 cm wire
2 x	Double conector with JR adapter and 200 mm extension
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	Servo slow down unit (0,7-14,7 sec )
1 x	SPS Remote switch actuator
2 x	SPARK Switch 7.4v
2 x	Landing gear Rocket 400
2 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Tape GFK 38 mm
1 x	Sparkplug 1/4-32 EVO 10GX
1 x	GPS Expander Module
1 x	Y Cable
1 x	Spark motor OS Type F
1 x	Sparkplug NGK CM6
1 x	Gates hinge
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	15 mm reinforced hinge
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	WingFix ULTRA Black Edition
1 x	Field folding model stand SebArt
2 x	120x60 mm SLH KOVO wheel
1 x	SIMtransmitter 6 Mode 2
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Propeller balancer
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	20x200 mm battery rings
1 x	JETImodel Addcap 1640
1 x	Female connector for 20 pines AWG
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Extension 2/3 lipos JST - JST/C
1 x	Male connector for 10 pines AWG
1 x	JETImodel DPS 40
1 x	Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm
1 x	Bearings for motors hacker A50
1 x	EDGE 540-A 105" (2660 mm)
1 x	Hacker X-Pro USB interface V2
1 x	Electronic switch JETI SP06 Opto
1 x	Extension 6 lipos XH > EH
1 x	Interruptor RX/Batterie
1 x	Female connector for 16 pines AWG
1 x	DPSI magnetic switch actuator (housing)
1 x	Female connector for 10 pines AWG
1 x	EWC3 40 cm wing connector
1 x	Magnetic Interruptor MULTIPLEX
1 x	FX three-position switched channel, long
1 x	Male connector for 16 pines AWG
2 x	Male connector for 12 pines AWG
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Male connector for 20 pines AWG
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Extension 2/3 lipos JST/C
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	A40 Backmountset complete
1 x	Cable adapter iCharger
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x	Esc master MEZON 120 Lite
1 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Esc MasterBasic 70SB
1 x	Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x	A50 Motor Mount Alu complete set
1 x	Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x	Propeller 8x4 Electric
1 x	Propeller POWER-PROP 12x9
1 x	Propeller POWER-PROP 13x9
1 x	KIRA 480-43 5,2:1
1 x	Actro 32-3 Heli MAX 5mm
1 x	GPS Logger Dymond
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	Propeller POWER-PROP 10x6
1 x	Propeller electric carbon 8.5x5
1 x	Propeller POWER-PROP 11x9
1 x	KIRA 600-20 6,7:1
1 x	PYRO 600-11
1 x	PYRO 650-103 Long Axi
1 x	KIRA 400-27
1 x	Xoar Electric Beechwood Prop 20x10
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Strip ABS 2.0x3.0x1000 mm
2 x	Pins M connect Multipin connectors AWG 20-24
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG
1 x	Female connector for 12 pines AWG
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Connector Sub-D 2+5 Male
1 x	Multi-adapter balancer JST/C - TP
1 x	MPX-Dean "T" Adapter
1 x	Battery charging cable XT60
1 x	Adapter lead MPX/XT60
1 x	UBEC 6A KAVAN
1 x	PowerBox SparkSwitch RS
1 x	Motor B50 19 S & 6.7:1 gearbox
1 x	Xoar Electric Beechwood Prop 22x10
1 x	A60-6XS V4 28-Pole
1 x	DUPLEX 2.4EX RC Switch
1 x	DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS
1 x	EWC6 40 cm wing connector
1 x	Female connector for 6 pines AWG
1 x	4 LiPo XH>EH adapter
1 x	Circlick securite
1 x	Cabling for Fox MDM1 wings
1 x	TrainerCord (master-learner)
1 x	SPARK Switch 5.9v
1 x	USB interface ALTIS
1 x	PSC 5
1 x	Motor A60-7XS V4 28-pole kv330
1 x	Motor B40 10L + MAXON 4,4:1 Keramik
1 x	Tube mounting clips (5 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	EXTRA 300 78" V3 Yellow/Red/Blue

9,967.98EUR