135.00EUR

Servo HITEC D950 TW
[ROID950TW]

Servo HITEC D-950 TW.

The titanium gear D-950TW is part of Hitec’s D-Series dynamo servo line. All Hitec D-Series servos have been designed using their cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU, and a 12-bit ADC for unprecedented programmability and flexibility. These servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with an M3 pan head with a phillips drive style, each D-Series servo brings monster performance never known before in the market.

Special Features:
- Wide Voltage Range: DC 4.8-8.4V
- 2 cell Li-Pi (6 cell Ni-MH) compatible
- Programmable digital amplifier with MOSFET drive
- Gold plated connector
- Narrow dead band width & high standing torque
- Applied H25T horn gear
- 3mm horn screw (‘+’ & HEX socket screw included)
- 32bit MCU / 12bit ADC
- Durable titanium alloy metal gears with dual ball bearings
- Ultra hardness gear shaft with 3 axial metal bushing
- Heat sink for motor
- Water & dust resistant (splash proof)

Dimensions 1.57” x 0.79” x 1.50” (40 x 20 x 38mm)
Product Weight 2.40oz (68g)
Output Shaft Style 25 tooth (H25T) spline
Voltage Range 4.8V - 8.4V
No-Load Speed (4.8V) 0.23 sec/60°
No-Load Speed (6.0V) 0.17 sec/60°
No-Load Speed (7.4V) 0.14 sec/60°
Stall Torque (4.8V) 291.63 oz/in. (21.0 kg.cm)
Stall Torque (6.0V) 402.73 oz/in. (29.0 kg.cm)
Stall Torque (7.4V) 486.05 oz/in. (35.0 kg.cm)
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .079°/μsec
Max Travel (out of box) 118.5°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 2µs
Motor Type Coreless
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Type Straight Cut Spur
Gear Material Titanium
Wire Length 11.81" (300mm)

under request

Reviews

Quick Find

Shopping Cart

2 x	Hitec 25 mm servo arm with M3 ball link
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
2 x	XTorque CFK Servohebel 38
3 x	Futaba 50/60 mm servo pull-pull double arm with ball link
2 x	Futaba 24/30 mm servo pull-pull double arm with ball link
3 x	HITEC 17 mm servo arm with ball link HITEC
2 x	Hitec 38 mm servo arm with ball link
2 x	Futaba 20 mm servo arm
2 x	Futaba 25 mm servo arm with ball link
1 x	Servo safety connector (10 pcs)
2 x	Futaba 17 mm servo arm with ball link HITEC
2 x	Futaba 30 mm servo rounded arm
3 x	54 mm Futaba servo arm tandem with ball link
2 x	Futaba 52 mm servo arm
2 x	Vertical mounting servo holder
2 x	Futaba 25 mm servo arm with M3 ball link
2 x	Hitec 52 mm servo arm
1 x	Futaba 2x20 mm servo double arm
1 x	17 mm servo arm with ball link DES Graupner
2 x	HITEC 20 mm servo arm with ball link
2 x	Horizontal servo holder
2 x	Hitec 25 mm servo arm with ball link
2 x	Futaba 38 mm servo arm with ball link
2 x	Futaba 46 mm servo arm with ball link
1 x	Futaba 38 mm servo arm
2 x	Horizontal mounting servo holder
3 x	Futaba 76/92 mm servo pull-pull double arm with ball link
3 x	Hitec 20 mm servo arm
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
3 x	HITEC DPC-11 programmer
1 x	Servo inverter
2 x	Servo inverter
2 x	Round Rod 1,5x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	Round Rod 3,0x1000 mm
3 x	ABS Strip 1.0x2.0x1000 mm
2 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension 15 cm (Futaba)
1 x	Extension 7.5 cm
1 x	Extension silicon 10 cm (Futaba)
2 x	Futaba Female 40 cm extension
1 x	Cabel "Y" 30 cm (graupner)
3 x	Extension silicon 75 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
2 x	Extension silicon 100 cm (Graupner)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension silicon 50 cm (Graupner)
1 x	Propeller balancer
1 x	WingFix ULTRA Black Edition
1 x	Servo TT ACE SHV 1504 MG
3 x	Angle of incidence meter
2 x	Field folding model stand
2 x	Medidor ángulos y/o incidencias
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
3 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Hitec 30 mm servo rounded arm
1 x	Adapter rotula M3
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	XTorque CFK Servohebel 38 HITEC 25T
1 x	46 mm Futaba servo arm tandem with ball link
2 x	FUTABA 20 mm servo arm with ball link
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
2 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
2 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
2 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Vertical servo holder
1 x	Futaba 54 mm servo arm with ball link
1 x	Servo MKS HBL380
1 x	Jeti Black cap
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Gear set HITEC HS-81
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Remote electric ignition system
1 x	Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x	Support XT60 conector (2 pcs)
2 x	Hitec 38 mm servo arm
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Ball link M2 (10 pcs)
2 x	Cap Hispano Aviación
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	Servo GO-1013 MG 3.8kg
1 x	Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	Servo BMS-4112
1 x	Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x	Field folding model stand SebArt
1 x	Strip 3,5x1,75x330 mm
1 x	Rudder 2_Tray 4~4.5 inch
1 x	Strip 1,5x1,5x330 mm
1 x	Strip ABS 2.0x3.0x1000 mm
2 x	Extension silicon 50 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Propeller balancer
1 x	Premium servo extension 50cm
1 x	Extension silicon 35 cm (Futaba)
1 x	F450/550 Quadcopter, landing gear
1 x	Surface Indicator Gauge Small
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Servo SAVOX SV-0236 MG HV
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 25 cm (Graupner)
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Quadcopter Q50 Kit Carbon Fiber
1 x	200 mm extensión servo HITEC/JR
1 x	Extension silicon 25 cm (Futaba)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Servo Mount S (red)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Hovercraft sailcloth
1 x	IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Pilot LA 500
1 x	LA500 cyclic central part
1 x	Raer wall
1 x	LA500 nose
1 x	Head core
1 x	DYNAMOMETER S-1580
1 x	Professional Servo tester
1 x	Servo Tester
1 x	Shirt Hispano Aviación
1 x	LA500 ciclic lever
1 x	Cierva C30 simulated motor
1 x	Rotor Mast
1 x	Cierva C30 spanish decoration Stickers
1 x	LA500 housing-upper cyclic
1 x	LA500 housing-lower cyclic
1 x	Autogyro Cierva C30 Spain
1 x	LA500 Autogyro
1 x	Head spacer
1 x	LA500 tail empennage
1 x	LA500 pre-rotation gear
1 x	LA500 pre-rotation gear hub
1 x	Xoar Electric Beechwood Prop 24x8
1 x	Rotorshape Autogyro
1 x	Head runner
1 x	Wheel keeper washer
1 x	Xoar Electric Beechwood Prop 16x7
1 x	Head lower part New
1 x	Head core bushing
1 x	Motor rotor LA-500
1 x	Bearing housing
1 x	Motor wall
1 x	LA500 Blades
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Blades 330mm
1 x	Ball joint long
1 x	Steering lever
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Rotorshape Elevator
1 x	Washer 2.2×4
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	LA500 rotor head core
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Turbine KingTech K30G Restart
1 x	Turbine KINGTECH K160 G4
1 x	Turbine KINGTECH K100 G4
1 x	Battery LiFe -3000/25C-3S 9.9V
1 x	PT 16x10 E Propeller
1 x	FOD Screen K45/60/70/85
1 x	Battery LiFe -1450/25C-3S 9.9V
1 x	Turbine KingTech K45G4+
1 x	Turbina KINGTECH K320 G5
1 x	PT 20x13 EL Propeller
1 x	KingTech Turbineoil 5L
1 x	Hand Pads for Tray JETI
1 x	DUPLEX 2,4GHz MRPM EX
1 x	Servo HITEC D-955 TW Titanium
1 x	Round Rod 1,0x1000 mm

18,562.07EUR