135.00EUR

Servo HITEC D950 TW
[ROID950TW]

Servo HITEC D-950 TW.

The titanium gear D-950TW is part of Hitec’s D-Series dynamo servo line. All Hitec D-Series servos have been designed using their cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU, and a 12-bit ADC for unprecedented programmability and flexibility. These servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with an M3 pan head with a phillips drive style, each D-Series servo brings monster performance never known before in the market.

Special Features:
- Wide Voltage Range: DC 4.8-8.4V
- 2 cell Li-Pi (6 cell Ni-MH) compatible
- Programmable digital amplifier with MOSFET drive
- Gold plated connector
- Narrow dead band width & high standing torque
- Applied H25T horn gear
- 3mm horn screw (‘+’ & HEX socket screw included)
- 32bit MCU / 12bit ADC
- Durable titanium alloy metal gears with dual ball bearings
- Ultra hardness gear shaft with 3 axial metal bushing
- Heat sink for motor
- Water & dust resistant (splash proof)

Dimensions 1.57” x 0.79” x 1.50” (40 x 20 x 38mm)
Product Weight 2.40oz (68g)
Output Shaft Style 25 tooth (H25T) spline
Voltage Range 4.8V - 8.4V
No-Load Speed (4.8V) 0.23 sec/60°
No-Load Speed (6.0V) 0.17 sec/60°
No-Load Speed (7.4V) 0.14 sec/60°
Stall Torque (4.8V) 291.63 oz/in. (21.0 kg.cm)
Stall Torque (6.0V) 402.73 oz/in. (29.0 kg.cm)
Stall Torque (7.4V) 486.05 oz/in. (35.0 kg.cm)
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .079°/μsec
Max Travel (out of box) 118.5°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 2µs
Motor Type Coreless
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Type Straight Cut Spur
Gear Material Titanium
Wire Length 11.81" (300mm)

under request

Reviews

Quick Find

Shopping Cart

1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
2 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
2 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
2 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	XH male balance (3S) connector (2 pcs)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	MPX Sub-D Adaptor
2 x	Connectors DEANS 4 pins (1 pair)
2 x	Conector BEC female (10 pcs)
2 x	XH female balance (2S) connector (2 pcs)
2 x	Conector Servo female 4 pines
1 x	2 mm male connector (2 pcs) with safety connector
1 x	XH female balance (5S) connector (2 pcs)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
2 x	XH female balance (3S) connector (2 pcs)
1 x	Optotronix Aurora Plug
1 x	Fixed launching hook
1 x	SERVO HOLDER
1 x	Foam wheel Ø 38 mm (2 pcs)
1 x	Extension silicon 100 cm (Futaba)
1 x	Extension silicon 10 cm (Graupner)
1 x
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Steering arm 12 mm Ø 4 mm
1 x
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Balsa panel 10x100x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Paramotor BackPack XXS (without accessories)
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
2 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Fiberglass plate 350x150x4.0 mm
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Carbon plate 350x150x3.0 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Carbon plate 350x150x5.0 mm
1 x	MR30 connector female
1 x	Mounting frame MPX female connector
1 x	Contacto macho pin conector (10 pcs)
1 x	MPX housing with flange (4 pcs)
1 x	XH male balance (4S) connector (2 pcs)
2 x	Connectors MPX male
1 x	XT60 Connector with Holder Male 2pcs
1 x	XH male balance (7S) connector (2 pcs)
1 x	PIN Connector female (100 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Connectors DEANS (T) micro
1 x	XH female balance (7S) connector (2 pcs)
1 x	XT-30 connector (pair)
1 x	Conector MT-60 (pair)
1 x	Conector XT-30 (hembra)
1 x	Soporte carbono MR30 (2 pcs)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	XH male balance (5S) connector (2 pcs)
2 x	Bag connector 2 mm
1 x	SyRen 50A 6V-30V Regenerative Motor Driver
1 x	MIG 29 3D RTF, Servo
1 x	Servo SAVOX SV-1273 TG
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
2 x	Soporte servo KST X08/H and Plus
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x	Gear carbonite set HITEC HS-6965
1 x	Servo DITEX EL0510M
1 x	Servo HITEC D-955 TW Titanium
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	ALU double servo arm 3 mm shaft
1 x	Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x	Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x	Servo SAVOX SV-1261 MG
1 x	Servo HITEC D950 TW
1 x	40 mm servo arm with bearing (2 pcs)
1 x	Aceite turbina JetsMunt 1 litro
1 x	Oil FUCHS 1 liter
1 x	Aceite AEROSHELL 500 SE Turbina 0,9 kg
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Fiberglass plate 350x150x0.3 mm
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	Glass fibre sleeve Ø 20 mm X 20m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Glass fibre braided sleeve (45mm) roll 10m
1 x	Glass fibre sleeve Ø 20 mm
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x	Panel Honeycom carbon 350x150x3.5mm
1 x	Gold antispark 4 mm plug
1 x	Connectors banna oro 4 mm (M/F)
1 x	Servo KST MS825 V8.0 35kg 8.4v
1 x	SERVO DES 806 Pignons
1 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x	SERVO DES 707 BB MG
1 x	Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x	Servo KST X08 Plus 9g HV servo
1 x	Soporte metal para servos
1 x	Servo HBS 690BB HV Digital
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Glass fabric 25 g (2 m²)
1 x	3 LiPo XH>EH adapter
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Conector FUTABA Servo male (10 pcs)
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	Conector XT-30 (macho)
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Cable coupler M3 (10 uds)
1 x	Kontronik connector (10 connectors, 5 pairs)
1 x	Adjustable launching hook
1 x	45 mm aluminium spinner (Kavan)
1 x	Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x	Servo HITEC D85 MG
1 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	Soporte servo KST X10 mini / DS135MG
1 x	Servo HITEC HS-485 HB
1 x	Servo GO-09 9g
1 x	Servo HITEC D145 SW
1 x	Spinner 42 mm EXTRA 330SC
1 x	Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x	SERVO DES 658 BB MG

6,498.09EUR