41.75EUR

Servo HITEC HS-5475 HB Digi
[ROIHS5475HB]

Servo Standard Digital

Servo digital estándar preciso con piuñones Karbonite con rodamiento. Debido a su bajo precio, es un excelente sustituto de los servos analógicos estándar con mayor empuje, una mayor fuerza de sujeción y opciones de programación - incluso en los modelos normales.

Programador servos digitales Hitec HFP-10 *, HFP-20, HPP-21 o HPP-21 Plus puede ser programado:
restablecer los valores de fábrica
la anchura de la banda muerta
rotación
velocidad de rotación
neutral
cantidad de deflexión
activar o desactivar a prueba de fallos
Ajuste de la desviación de emergencia a prueba de fallos
protección de sobrecarga (límite de potencia de 0-50% de sobrecarga)
Dimensions: 1.57" x 0.78"x 1.49" (39.8 x 19.8 x 38mm)

Product Weight 1.59oz. (45g)
Output Shaft Style 24 tooth (C1) spline
Voltage Range 4.8V - 6.0V
No-Load Speed (4.8V) 0.20sec/60°
No-Load Speed (6.0V) 0.17sec/60°
Stall Torque (4.8V) 72oz/in. (5.2kg.cm)
Stall Torque (6.0V) 89 oz/in. (6.4kg.cm)
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .079°/μsec
Travel per µs (reprogrammed normal res) .133°/μsec
Max Travel (out of box) 118°
Max Travel (reprogrammed normal res) 199.5°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Current Drain - idle (4.8V) 8.8mA
Current Drain - idle (6.0V) 9.1mA
Current Drain - no-load (4.8V) 400mA
Current Drain - no-load (6V) 500mA
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 8µs
Motor Type 3 Pole Ferrite
Potentiometer Drive Indirect Drive
Feedback Style 5KΩ Potentiometer
Output Shaft Support Ball Bearing
Gear Type Straight Cut Spur
Gear Material Karbonite
Wire Length 11.81" (300mm)
Wire Gauge 25AWG

under request

Reviews

Quick Find

Shopping Cart

1 x	Connector Sub-D 2+5 Female
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	4 LiPo XH>EH adapter
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	CC 03
1 x	Cabling for Fox MDM1 wings
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	UBEC 6A KAVAN
1 x	3 LiPo XH>EH adapter
1 x	CC 05
1 x	CC 01
1 x	30 cm BEC cable (male)
1 x	Connector Sub-D 2+5 Male
1 x	CC 02
1 x	Double conector with JR adapter and 200 mm extension
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Connector CAN 15
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	5 LiPo XH>EH adapter
1 x	BEC 3A FOXY
1 x	30 cm BEC cable (female)
1 x	DPS Switch JR/JR
2 x	Circlick securite
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger transmitter GRAUPNER
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
2 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
2 x	Round Rod 1,25x1000 mm
1 x	Strip 3,5x1,75x330 mm
2 x	Strip ABS 2.0x10.0x1000 mm
2 x	Round Rod 1,0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
2 x	Round Rod 5,0x1000 mm
3 x	Round Rod 1,5x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 4,0x1000 mm
3 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
2 x	ABS Strip 1.5x6.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	1/12 Pilot "Fighter"
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	EWC6 40 cm wing connector
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
4 x	Soporte grifo FESTO vertical (1 pcs)
2 x	Support XT60 conector (2 pcs)
2 x	Soporte filtro FESTO (4 pcs)
3 x	Tube support Ø 6mm (10 pcs)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
2 x	Wheel FEMA 82 mm / 5 mm
2 x	Wheel FEMA 100 mm / 6 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
1 x	Buy Perforated film 145 cm / 50 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x	Glass fabric 390 g/m² aero,10x1m
1 x	Panel Honeycom carbon 350x150x3.5mm
1 x	Glass fabric 425 g/m² aero,10x1m
1 x	Beech dowels 10 mm x 1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Digital precision scale up to 2000 g
1 x	Vacuum pump P1-N
1 x	1,5x50 mm allen screwdriver
1 x	RANGER Jet CANADA 1.854mm combo
1 x	Z Bender - S Type Tool
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	ABS Strip 1.5x4.0x1000 mm
2 x	Strip ABS 2.0x8.0x1000 mm
2 x	4" - 102 x 45 mm Ø5 mm aluminium core wheel
2 x	20 mm tail wheel for 0,5-1 Kg models
2 x	Nose wheel 62 mm
2 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	LiPo Storage Box Standard 1 Type 1
2 x	Support pumb/filter Xicoy X45
2 x	Support Flush MPX Conector (6 pcs)
1 x	Support conector MPX (6 pcs)
3 x	Recessed MPX connector support (6 pcs)
2 x	Actuador lineal HLS12-100210-7.4v
1 x	Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Lipo RAY 2200 mAh 2s 7.4v 30C
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	MPX Support (2 pcs)
2 x	PVC yellow battery termo-retract 69 mm (10 m)
2 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	PVC termo-retract battery 95 mm blue transparent (1 m)
2 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
2 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	PVC lilac battery termo-retract 70 mm (10 m)
1 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	PVC red battery termo-retract 68 mm (10 m)
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
2 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
2 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	Red 4 mm connector holder
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
2 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
2 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Steel brush wheel with 2.35mm
1 x	RANGER Jet NAVY 1.854mm combo
1 x	Screwdriver for Torx® TX6
1 x	Round Rod 3,0x1000 mm
1 x	Boomerang SPRINT V2 Red/Yellow
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Satellite receiver DUPLEX Rsat 900 NG MHz
1 x	DUPLEX Satellite receiver Rsat 900
1 x	DUPLEX R14 receiver 2,4GHz
1 x	DUPLEX R12 EPC receiver 2,4GHz
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Smart Soldering Iron 110W/230V AC
1 x	Tool for entel
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x	Soldering tip for KAVAN soldering iron KAV66.8338
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x	NoNa BB wheel Ø175x55mm in pair
1 x	SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
2 x	Super light ∅45x9 mm axi ∅3 mm metalic core wheel
1 x	ABS I Strip 10x5x1000 mm
1 x	Receiver DUPLEX R9 EX 2.4 GHz
1 x	Balsa panel 1.5x100x1000 mm
1 x	Receiver DUPLEX R5L EX 2.4 GHz
1 x	DUPLEX R6 EX receiver 2,4GHz
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	DUPLEX R7 REX receiver 2,4GHz A40
1 x	Receiver DUPLEX R3L EX 2.4 GHz
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	DUPLEX R7 receiver nano 2,4 GHz
1 x	Birch plywood plate 600x300x2.5 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Receiver DUPLEX REX 3 2.4 GHz
1 x	Receptor DUPLEX REX R9 Slim Assit
1 x	DUPLEX R7 receiver 2,4GHz
1 x	Battery voltage telemetry
1 x	Tank GFK Opus/JEt 300 ml
1 x	OPUS-V / Jet-CC-BF
1 x	50N turbine start protection tube
1 x	Sealing Iron Profi LCD
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Sealing Iron Sleeve PROF
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Screwdriver for Torx® TX8
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Starter EM Gear Power 250
1 x	Vacuum pump 12 CFM
1 x	Sub-D Plug Mold
1 x	Tube bender
1 x	silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x	Universal Filter
1 x	Starter EM Gear Power 80
1 x	XT-60 Plug Mold
1 x	Tool for entel
1 x	Z Bender - S Type Tool
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Tachometer Hyperion Multi-pala
2 x	Pilatus PC-21 2100 mm RED/WHITE (SebArt)
2 x	Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m
2 x	102x26 Ø6.0 mm aluminium core wheel
1 x	Pilatus PC-21 50E, GLOW set conversion (SebArt)
1 x	DORNIER DO 335 EP ARF 1724 mm
1 x	Wheel FEMA 112 mm / 6 mm
1 x	Support ECU Xicoy X-45
1 x	Wheel Ø 90 mm (1 ud) Electron Retracts
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	Servo HITEC HS-5485 HB Digi
1 x	Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par)
1 x	Superlight wheel 125 mm with valve (2 pcs)
1 x	Wheel Scale 1/4 Vintage 178 mm / 7" (1 par)
1 x	Wheel FEMA 140 mm / 6 mm
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	Wheel 22 mm
1 x	Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Wheel FEMA 165 mm / 8 mm
1 x	Wheel 75 mm with electromagnet and brake disk (2 uds)
1 x	SUPER DIMONA TC-80
1 x	Support FUEL DOT V3
1 x	YAK-23 "FLORA" (RBC Kits)
1 x	Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt)
1 x	Foam wheel Ø 351 mm (2 pcs)
1 x	SF260 SIAI MARCHETTI 50E red/white (SebArt)
1 x	Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm)
1 x	Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m
1 x	Wheel 38 mm V2
1 x	Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt)
1 x	Support Pitot JETI
1 x	Soporte grifo FESTO (2 pcs)
1 x	89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x	Wheel FEMA 70 mm / 5 mm
1 x	SF260 SIAI MARCHETTI 50E yellow/black (SebArt)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	Servo HITEC HS-225 MG
1 x	Servo Digital HITEC HS-5065 MG
1 x	Servo HITEC HS-45 HB
1 x	Wheel FEMA 127 mm / 6 mm
1 x	Pilatus PC-21 2100 mm BLUE/WHITE (SebArt)
1 x	Pilatus PC-21 50E, Electric L.G (SebArt)
1 x	Wheel Ø 75 mm (1 ud) Electron Retracts
1 x	DC-3 Douglas (White/Blue) 1800 mm
1 x	DC-3 Douglas (DAKOTA) 1800 mm Electric LG
1 x	Wheel FEMA 152 mm / 8 mm
1 x	Skyray (RBC Kits)
1 x	Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3.
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Pilatus PC-21 50E BLUE/WHITE (SebArt)
1 x	60x25 mm tail wheel "type F3A"
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	2.5 inch aluminium core wheel (1 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Foam wheel Ø 38 mm (2 pcs)
1 x	Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m
1 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x	70x23 Ø3.5 mm aluminium core wheel
1 x	Pilatus PC-21 50E, wings carrying bags (SebArt)
1 x	Wheel 18 mm
1 x	White gelcoat 1 Kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	MEKP Harderner 100 g
1 x	Mould Resin P 10 kg
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Hardener Aero EPH 161 (500 g)
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Hardener Aero EPH 161 (250 g)
1 x	Hardener P-25, canister 2.5Kg
1 x	resin-hardener L-385 H-385 (5000 g)
1 x	HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Receptor MINIMA 6S HITEC
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Servo HITEC HS-325 BB
1 x	Servo HITEC HS-5475 HB Digi
1 x	Servo HITEC HS-45 HB, servo box
1 x	HITEC DPC-11 programmer
1 x	Servo HS-5070 MH Hi Volt
1 x	Servo HITEC D625 MW

27,855.74EUR