11.90EUR

Servo HITEC HS-53
[ROIHS53]

The HS-53 is Hitec’s economical feather servo, designed to compete head to head with the influx of low cost servos, while still maintaining their renowned quality. Designed with a durable nylon gear train and an efficient three-pole cored motor, this light-weight servo is a terrific fit for small power planes and gliders. Priced right, it is sure to become a universal favorite!

SPECS
Dimensions: 1.12” x 0.46” x 0.95” (22.8 x 11.6 x 22.6mm)
Product Weight 0.25oz (8g)
Output Shaft Style 15 tooth (A1) spline
Voltage Range 4.8V - 6.0V
No-Load Speed (4.8V) 0.14 sec/60°
No-Load Speed (6.0V) 0.11 sec/60°
Stall Torque (4.8V) 20.94 oz-in. (1.51kg.cm)
Stall Torque (6.0V) 26.53 oz-in. (1.91kg.cm)
Max PWM Signal Range (Standard) 553-2270μsec
Travel per µs (out of box) .105°/μsec
Max Travel (out of box) 180.5°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Continuous Rotation Modifiable No
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 8µs
Motor Type Three Pole Cored
Feedback Style 5KΩ Potentiometer
Output Shaft Support Outer case serves as bearing
Gear Type Straight Cut Spur
Gear Material Nylon
Wire Length 6.29" (160mm)
Wire Gauge 28AWG

temporarily out of stock

Reviews

Customers who bought this product also purchased

Servo HITEC HS-81

temporarily out of stock

Propeller Pleg CAM Carbon 17x11

temporarily out of stock

Quick Find

Shopping Cart

1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	15 mm reinforced hinge
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	ABS tube 16.0x14.0x1000 mm
2 x	ABS tube 7.0x6.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	ABS tube 3.0x2.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
2 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
2 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Vasa model Catapult
1 x	Bungee HLG Premium
1 x	SE Ring 300 mm (2 pcs)
1 x	Dremel 3000 130W
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Strip 2,5x1,25x330 mm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	LUCAS pilot ARTF
2 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Tailwheel for F3A size
1 x	Hacker X-Pro USB interface V2
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	JetiBOX
2 x	Retract undercarriage
1 x	Pitts Muffler kit for CAP 21
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	1,6x1000 mm 2:1 red termoretract tube
2 x	Cooler motor type 280
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
2 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	500 ccm gasoline fuel tank
1 x	Starter EM Gear Power 80
1 x	Fuel tank 1500ml (50oz)
1 x	Conector FESTO M3 Quick 3mm 90º
1 x	Motor A2212/13T
1 x	Bujia OS G5 gasolina
1 x	Conector MT-60 (pair)
1 x	IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Servo NARO Max Std
1 x	Crystal Universal RX 35.140 Ch 74
1 x	DYMOND VTX UBS Programming adapter
1 x	Kontronik ProgUnit
1 x	Actuador lineal HLS12-100210-7.4v
1 x	PROFI Box JETI
1 x	Foreman, scale 1:32
1 x	Motor holder for AC 28/7
1 x	Cooler motor type 300
1 x	Decorative caps, multicoloured
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Servo HITEC HS-45 HB
1 x	Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	HITEC DPC-11 programmer
1 x	Radial Mount Set for AXI2814 and AXI2820 V2
1 x	Aramid 50 daN 50 m
1 x	Opale Rucksack
1 x	Paramotor BackPack XXS 2
1 x	Oratex Silver 2m
1 x	Oracover light Grey 2m
1 x	PYRO 800-48 Long Axi
1 x	AXI 2808/24 V2
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	KIRA 480-26 5,2:1
1 x	KIRA 600-22 6,7:1
1 x	AXI 2217/16 V2 Long
1 x	150 mm inflatable superlight deluxe wheel (2 pcs)
1 x	Conector MR-60 (pareja)
1 x	Sprung retractable undercarriage (Alfa model)
1 x	Ciano KAVAN Thin 20g
1 x
1 x	Retract undercarriage for gliders up to 2 Kg
1 x	Crawler GRE-24 RTR 1:24 Arena
1 x	Retract undercarriage for gliders up to 3,5 Kg
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Central support Speed 280
1 x	Central support Speed 600
1 x	Fiberglass motor-holder for electric motors
1 x	Foam plastic plates (310x210x3 mm)
1 x
1 x	Beech dowels 2.0 x 1000 mm
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Receiver bed (Blue)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Motor A30-12 L V4
1 x	Motor A30-12 XL Glider
1 x	A30-M/L/XL Backmountset complete
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	A50 Backmountset complete
1 x	Motor A30-14 L V4
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Motor B20-18 L + 4:1 gearbox
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Servo HITEC HS-5085 MG Digi

5,819.05EUR