135.00EUR

Servo HITEC D950 TW
[ROID950TW]

Servo HITEC D-950 TW.

The titanium gear D-950TW is part of Hitec’s D-Series dynamo servo line. All Hitec D-Series servos have been designed using their cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU, and a 12-bit ADC for unprecedented programmability and flexibility. These servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with an M3 pan head with a phillips drive style, each D-Series servo brings monster performance never known before in the market.

Special Features:
- Wide Voltage Range: DC 4.8-8.4V
- 2 cell Li-Pi (6 cell Ni-MH) compatible
- Programmable digital amplifier with MOSFET drive
- Gold plated connector
- Narrow dead band width & high standing torque
- Applied H25T horn gear
- 3mm horn screw (‘+’ & HEX socket screw included)
- 32bit MCU / 12bit ADC
- Durable titanium alloy metal gears with dual ball bearings
- Ultra hardness gear shaft with 3 axial metal bushing
- Heat sink for motor
- Water & dust resistant (splash proof)

Dimensions 1.57” x 0.79” x 1.50” (40 x 20 x 38mm)
Product Weight 2.40oz (68g)
Output Shaft Style 25 tooth (H25T) spline
Voltage Range 4.8V - 8.4V
No-Load Speed (4.8V) 0.23 sec/60°
No-Load Speed (6.0V) 0.17 sec/60°
No-Load Speed (7.4V) 0.14 sec/60°
Stall Torque (4.8V) 291.63 oz/in. (21.0 kg.cm)
Stall Torque (6.0V) 402.73 oz/in. (29.0 kg.cm)
Stall Torque (7.4V) 486.05 oz/in. (35.0 kg.cm)
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .079°/μsec
Max Travel (out of box) 118.5°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 2µs
Motor Type Coreless
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Type Straight Cut Spur
Gear Material Titanium
Wire Length 11.81" (300mm)

under request

Reviews

Quick Find

Shopping Cart

1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita 14x8x5.5 mm
2 x	SERVO HOLDER
1 x	Towing hook <3m
2 x	Towing hook
1 x	LOWER TOW HOOK
1 x	Towing hook
1 x	Xplorer4 anemometro
1 x	Xplorer1 anemometro
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
2 x	BALSA trip 10x10x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	Ferrita con funda
1 x	Ferrita 27x14x7 mm
2 x	Simulador RealFlight RF-9.5 S (sin emisora)
2 x	Interface Realflight Simulator
1 x	RF9 Flight Simulator with Spektrum Controller
2 x	Interface Jack Adapter IKARUS
1 x	Slave-cable USB Easy Sim
2 x	SIMtransmitter 6 Mode 2
2 x	EasyFLY Addon
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	DYNAMOMETER S-1580
1 x	Strip 2,0x2,0x330 mm
1 x	Round Rod 4,0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
2 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
2 x	Strip ABS 2.0x10.0x1000 mm
2 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 2,5x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 6,0x1000 mm
2 x	Round Rod 2,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
2 x	Optical RPM Sensor
1 x	Piloto jet 130 mm
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/10 Pilot "Jimmy"
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Adjustable launching hook
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Tow hook for tug
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
2 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	Servo TOPMODEL DS9010 T
1 x	Servo GO-1053 MG 20.0kg
1 x	Servo FUTABA HPS-A700 Digital S-Bus
1 x	Servo FUTABA S 3071 HV S-Bus
1 x	Futaba S9650/9670SV - Upper Case
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	Servo FUTABA S 3072 HV S-Bus
1 x	Balsa panel 2.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	11 mm wing servo holder
1 x	BALSA triangular 15x15x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	White smoke canister 140 g
1 x	B4-0 rocket charges (6 pcs)
1 x	White smoke canister 100 g
1 x	Green smoke canister 65 g
1 x	Skies 2x 335 mm + 1x Esqui 250mm
1 x	AX-60 starters (5 pcs)
1 x	PCARD Wireless System
1 x	Remote electric ignition system
1 x	Support FUEL DOT V3
1 x	Support conector MPX (6 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Servo GO-09 9g
1 x	18 mm wing servo holder
2 x	89 mm double servo arm with bearing (2 pcs)
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x	SERVO DES 658 BB MG
1 x	90x60 mm standart servo cover
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Servo FUTABA SBL 471 SV
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x	13 mm wing servo holder
1 x	Rudder 2_Tray 4~4.5 inch
1 x	Gold aluminium servo arm V2-JR 1,0" inch M3
1 x	Servo HITEC HS-485 HB
2 x	3,9 mm ZG20-ZG38 servo arm
1 x	Servo Mount M (blue)
1 x	SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	ABS I Strip 10x5x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Servo DITEX EL0510M
1 x	Servo DITEX TD2612S
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Tube support Ø 6mm (10 pcs)
1 x	3.2 mm Prop Adapter M6
1 x	Servo HITEC D941 TW
1 x	290 mm M4/4 mm Prop shaft
1 x	Servo HITEC HS-311
1 x	58 mm micro servo cover
1 x	Filler Gauges
1 x	Xplorer2 anemometro
1 x	Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x	SERVO DES 806 Pignons
1 x	3 mm Prop Adapter M6
1 x	Servo HITEC D954 TW

4,549.71EUR