430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Cable coupler M2 (10 uds)
2 x 25 mm Sandpaper file
1 x Flybar support metal LAMA
2 x 55 mm aluminium spinner (Kavan)
1 x Engine mounts for .09 - .19 engine
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Cable coupler M3 (10 uds)
1 x Concave-Convex sandpaper file 13 mm
2 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x 50 mm aluminium spinner (Kavan)
1 x Fully Threaded Steel Rod M3
1 x Dummy motor GPW Wasp Scale 1/4
1 x 10 mm aluminium spinner (Kavan)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x SIG Coverall 1.2x1.8 m
1 x Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x Superlight deluxe wheel 56 mm (2 pcs)
1 x Servo GO-1013 MG 3.8kg
1 x Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x Program card KAVAN PRO
1 x Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x SIG Coverall 1.2x0.9 m
1 x SIG Coverall 1.2x4.5 m
1 x T-shape holder metal LAMA
1 x Turbina KINGTECH K260 G4
1 x Superlight deluxe wheel 62 mm (2 pcs)
1 x Superlight deluxe wheel 75 mm (2 pcs)
1 x USB programador GO servos
1 x Shaft sleeve LAMA
1 x Valvula One way
1 x Superlight standard wheel 100 mm (2 pcs)
1 x Metal clevis M2 (10 uds)
1 x LiPo KAVAN 3700 mAh 11.1v 40/80C
1 x Glow Plug Clip 1.3 Ah
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x Green silicone 0,25 mm² wire (25 m)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x 5 mm M2 variable horn
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Opto Gas Engine Kill Switch
1 x Junta humo metalica G35 DLE35
1 x 100g Flux Paste for Silver Solder
1 x Brass control horn M4 short for wire (10pcs)
1 x Aluminium ignition bad (red)
1 x Xplorer2 anemometro
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Short ball link M3 (6 uds)
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Long ball link M2 (6 uds)
1 x Horn 6/35 with M3 Bearing
1 x SE Ring 480 mm (2 pcs)
1 x 20x200 mm battery rings
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Ball Link Plier
1 x Ball link M3 RPA's-UAV's
1 x Brass control horn M4 short for wire (4 pcs)
1 x Pitts Muffler kit for CAP 21
1 x Jeti Black cap
1 x 20x1000 mm Ring Strap Back To Back
1 x 55% silver electrodes (2 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Short ball link M1.6 (6 uds)
1 x 6 mm Quick clamp_S (10 pcs)
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x GLOW 2C + accesories
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x 6 mm aluminium horn with patella
1 x DLE 30 complete electronic ignition
1 x Optical RPM Sensor
1 x Digital weight, angle and balance meter BASIC
2 x M3 Maxi ball link (2 uds)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x RCEXL Electronic ignition twin CM-6
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Horn for flap control (1 pcs)
1 x Cut tube
1 x Horn DUBRO 1/2A
1 x Compact on-board starting system (9715)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x M3 Maxi ball link (2 uds)
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Buy Perforated film 100 cm / 50 m
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
2 x 1,5x50 mm allen screwdriver
1 x Extra long horn 60x30
1 x Cable control set
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x 6 mm Prop Adapter M8
1 x Extractor piñones 2.3/3.2 mm
1 x Allen wheel collar M3x3
1 x B4-0 rocket charges (6 pcs)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Blue smoke canister 100 g
1 x "S" set for planes
1 x Smoke set "M"
1 x Electric rocket starters (6 pcs)
1 x 2 LiPo XH>EH adapter
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Interface Jack Adapter IKARUS
1 x 
1 x Carbon plate 350x150x1.0 mm
1 x Windsock Ozone L -1200 mm
1 x Wing OXY 0,5 pulgadas2
1 x Opale Rucksack
1 x Para-RC Mix
1 x Paramotor BackPack XXS (without accessories)
1 x GRE-18 RTR Crawler 1:18 Orange
1 x Battery LiPo GRE18 600 mAh 7.4v
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x Blade holder metal LAMA
1 x Lipo KAVAN 2200 mAh 11.1v 30/60C
1 x Debonder CA 20g
1 x Beech dowels 2.0 x 1000 mm
1 x Propeller CFK 14x7
1 x Propeller CFK 15x13 Slim
1 x Vess propeller 11x7 S
1 x Propeller CFK 14x8 Slim
1 x Propeller CFK 18x9
1 x Propeller CFK 13x7.5
1 x Hot Glue Stick RED
1 x 20 mm tail wheel for 0,5-1 Kg models
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Wheel 75 mm with electromagnet and brake disk (2 uds)
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x Propeller POWER-PROP 16x10
1 x Foam wheel Ø 38 mm (2 pcs)
1 x Wheel collar 3 mm Ø (4 uds)
1 x Propeller CFK 15.5x10
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x Distanzstück motor OS 120 AX
1 x Propeller CFK 15x15
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Hose clips 6 mm
1 x Propeller CFK 16x16 Wide
1 x Propeller CFK 14.5x10 Slim
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Beech dowels 4.0 x 1000 mm
1 x Propeller CFK 23x12
9,169.76EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies