430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Balsa panel 10x100x1000 mm
2 x A/C quality beech plywood BIRCH 600x300x1.0 mm
2 x A/C quality beech plywood 600x300x5.0 mm
2 x BALSA trip 2.0x2.0x1000 mm
1 x Balsa panel 5.0x100x1000 mm
3 x Balsa panel 1.0x100x1000 mm
2 x BALSA trip 3.0x3.0x1000 mm
2 x Birch plywood plate 600x300x3.0 mm
1 x A/C quality beech plywood 600x300x0.8 mm
2 x A/C quality beech plywood 600x300x1.5 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Balsa panel 6.0x100x1000 mm
3 x BALSA triangular 15x15x1000 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
2 x Beech dowels 3.0 x 1000 mm
2 x BALSA trip 5.0x5.0x1000 mm
1 x Balsa panel 3.0x100x1000 mm
2 x BALSA triangular 10x10x1000 mm
2 x Balsa panel 2.5x100x1000 mm
2 x Straightened rod Ø 4.5 mm x 1000 mm
2 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Brass rod Ø 0.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Civilian pilot "Joe" size 9cm (Slimline)
2 x Pilot "Goose" (Slimline)
2 x 18 mm reinforced hinge
1 x 15 mm reinforced hinge
1 x Gates hinge
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 1/7 Pilot "Japanese"
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Lite Plywood panel 600x300x2.0 mm
1 x BALSA triangular 6x6x1000 mm
2 x A/C quality beech plywood 1520x750x3.0 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
3 x Walnut wood slat 1.5x1.5x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Birch plywood plate 600x300x2.5 mm
1 x BALSA trip 10x10x1000 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
2 x Balsa panel 1.5x100x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Birch plywood plate 600x300x1.2 mm
1 x BALSA trip 8.0x8.0x1000 mm
2 x BALSA triangular 8x8x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Lite Plywood panel 600x300x3.0 mm
2 x BALSA trip 3.0x5.0x1000 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x Glases Moritz
2 x Interface Jack Adapter IKARUS
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x BALSA trip 6.0x6.0x1000 mm
1 x XH male balance (2S) connector (2 pcs)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Threaded coupler M3 (10 uds)
1 x Charger LiPo Charger4
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Propeller hub spacer 8/5.5
2 x Flap hinge 33x9 mm (6 pcs)
2 x Propeller G-Sonic 20x8
1 x Servo SAVOX SH 0257 MG
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x 1/6 Pilot "Buddy"
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x 1/12 Pilot "Fighter"
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x 1/12 Pilot "Langley"
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Piloto Jet "Green" 1/6 Scale
1 x 1/12 Pilot "Cougar"
1 x Pilot "Anthony" (Slimline)
1 x Long pinned hinge (12 uds)
1 x 1/12 Pilot "Tom"
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x 1/6 Pilot "Garry"
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Pilot "Dick" Legends Series (Slimline)
1 x Micro flex hinge (12 uds)
1 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Slave-cable USB Easy Sim
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Joint with bearing M2,5 22x5,5
1 x 6 mm ball link M3 (10 pcs)
1 x Joint with bearing M2 22x5,5
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x 57 mm micro-mini servo cover
1 x Carbon servo arms for HITEC HS 65 (4 pcs)
1 x Fast attachment for servos (25 pcs)
1 x BALSA trip 4.0x4.0x1000 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Servo SAVOX SA-1256 TG
1 x Servo TOPMODEL DS9010 T
1 x Metal gear set for HS85MG/5085MG
1 x SERVO DES 707 BB MG, Pignons
1 x Servo BMS-4112
1 x Servo TOPMODEL STANDARD S3217
1 x SSPS105 Super Hi-Power servo
1 x Long ball link M1.6 (6 uds)
1 x Short ball link M1.6 (6 uds)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Soporte metal para servos
1 x Receiver replacement antenna, approx. 15
1 x Canopy Latch
1 x Beech dowels 4.0 x 1000 mm
1 x MZ-18, 9 Channel HoTT
3,238.49EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies