430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Conector JR Servo male (10 pcs)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Connectors banna oro 3 mm (M/F)
2 x Bag connector 2 mm
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Connectors DEANS (T)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Connectors banna oro 4 mm (M/F)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
2 x Connectors banna oro 0,8 mm (M/F)
2 x Conector BEC male (10 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
2 x Banna gold connector 2,5 mm (M/F)
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Conector BEC female (10 pcs)
3 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x 2 mm female connector (2 pcs) with safety connector
4 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Conector JR Servo male (10 pcs)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Conector JR Servo female (10 pcs)
3 x Connectors banna oro 2 mm (M/F)
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Mounting frame MPX female connector
1 x Conector XT-30 (macho)
1 x MPX Support
1 x Servo Connector Brackets (10 pcs)
1 x Connectors MPX black female
1 x XT-60 connector (male)
1 x 30 cm MULTIPLEX female connector
1 x Protector Connector Dean-T (1 pair)
2 x Wing conexion 2 servos JR/Graupner 50 cm
1 x MR30 connector female
1 x MPX housing with flange (4 pcs)
1 x Soldering PCBs 8pin, 5 pieces
1 x Conector MT-60 (pair)
1 x MPX PCB "6 Pins", 5 pieces
1 x Soporte carbono MR30 (2 pcs)
2 x XT-90 connector (pair)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Cinta Goldfix 1m
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x TrainerCord (master-learner)
1 x 30 cm BEC cable (female)
1 x 30 cm BEC cable (male)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x CM-3
1 x CC 03
1 x Glases Aspen
1 x Windsock Ozone L -1200 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Conector Servo female 4 pines
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Couple M4 for wire (10 pcs)
1 x Xplorer1 anemometro
1 x SCHARNHORST Battleship 1:200
1 x Electronic fog horn
1 x Cooler motor type 150
1 x 
1 x Cooler motor type 280
1 x Indoor Brushed motor kit
1 x Connectors banna gold 5,5 mm (M/F)
1 x Carbon blade 230 mm
1 x Connector CAN 15
2 x XH female balance (4S) connector (2 pcs)
1 x XH female balance (2S) connector (2 pcs)
2 x Program 5v SIO RS 232
1 x XT-60 connector (female)
1 x XT60 Connector with Holder Male 2pcs
1 x PIN Connector female (100 pcs)
1 x Kontronik connector (10 connectors, 5 pairs)
1 x Contacto macho pin conector (10 pcs)
1 x MR30 connector male
1 x Conector XT-150 6mm (Set: 5 pares)
1 x Nitroverdu 500 ml
1 x Spannlack 1000 ml
1 x Ferrita con funda
1 x RF9 Flight Simulator with Spektrum Controller
1 x 
1 x Spray Graphit 33
1 x Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x Red aluminium servo arm V1-Futaba 17 mm M2
1 x Red aluminium servo arm V3-Futaba 3,5inch
1 x Spray adhesive AEROFIX 2
1 x XH male balance (7S) connector (2 pcs)
1 x XH LiPo extension lead
1 x XH female balance (9S) connector (2 pcs)
1 x XH male balance (8S) connector (2 pcs)
1 x Hobbylite Filler, Balsa colour
1 x XPower H PROP HUB Ø6.0/42.5mm 0º
1 x 34 mm Alu spinner 4 mm pleg. propeller
1 x 34 mm Alu spinner 3.17 mm pleg. propeller
1 x 12V Car Adapter
1 x GameCommander USB Universal
1 x Jet Pipe for A-10 Skymaster (set 2 pcs)
1 x Interface Jack Adapter IKARUS
1 x Jet Pipe for ASPIRE 2m JMF
1 x LASER 73" 1.85m (05) PILOT
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x POLARON EX 800w charger
1 x Fod Guard 67x32 mm
1 x Fod Guard 94x32 mm
1 x Fod Guard 83x32 mm
1 x Telemetry SPEKTRUM
1 x Jet Pipe 40N-80N (200 mm)
1 x FOD Screen K45/60/70/85
1 x Telemetry JETI
1 x Tailormade cone A-10 Skymaster
1 x Jet Pipe 160N-250N (120/130 mm)
1 x Smokelance
1 x Fod Guard 73x32 mm
1 x Bluetooth Adapter JET CENTRAL
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
1 x Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART)
1 x Antonov AN2 Scale 1/6 - 3m
1 x Beech dowels 4.0 x 1000 mm
1 x Distanzstück motor OS 120 AX
1 x XH male balance (5S) connector (2 pcs)
1 x Flap hinge (6 pcs)
1 x EXTRA NG 85" 2159mm red/white
1 x EDGE 540-A 91" (2310 mm)
1 x Crystal RX 35.010 Ch 61
1 x Motor OS 15 LA
1 x Carburador OS (Type 40K) 46AXII
1 x Servo NARO Max Std
1 x 9x4.7 * 22x12 carbon propeller
1 x EasyFLY Addon
1 x Landing gear retract neumatic (Jet Legend)
1 x MZ-18, 9 Channel HoTT
1 x Manometer 4 mm
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Spikes Band (5 m)
1 x Mini Infrared Thermomiter
1 x Conector JAPAN G2 Set 5 pares
1 x Propeller G-Sonic 20x8
1 x Hose clips 6 mm
1 x Propeller 8x4,3 SlowFlyer
1 x Foam plastic plates (310x210x2 mm)
1 x Propeller hub spacer 8/5.5
1 x Beech dowels 3.0 x 1000 mm
1 x Decorative caps, multicoloured
1 x Quick hose connector 6-4 mm
1 x SkyMaxx 1.550 mm (kit)
12,355.05EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies