430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extractor piñones 2.3/3.2 mm
1 x ALU servo arm 90º 3 mm shaft
1 x Servo Mount M (blue)
1 x Hitec 20 mm servo arm
1 x Futaba 24/30 mm servo pull-pull double arm with ball link
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x SERVO DES 806 Pignons
1 x Silent-blocks DLE 170M
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Servo Digital HITEC HS-5065 MG
1 x SAITO FG-36 carburetor
1 x Fuel tank 1500ml (50oz)
1 x Conector FESTO M3 Quick 3mm 90º
1 x Extension Arm for Carburetor (red)
1 x Sparkplug DLE CM6
1 x Sparkplug 1/4-32 EVO 10GX
1 x Race Outboard MERCURY type A
1 x Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x 120x60 mm C SLH KOVO wheel
1 x Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x Servo ROBBE FS-31 Pico Servo
1 x ALU double servo arm 3 mm shaft
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x 25 mm gas motor standoff
1 x 5 mm gas motor standoff
1 x 11 mm Rubber pads (14 pcs)
1 x Antenna Hole Cap V1 (Silver)
1 x 50 mm gas motor standoff
2 x Aluminium wide washer M3 gold (4 pcs)
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
2 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
2 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
2 x Autogyro Cierva C30 Spain
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Blind nut M5 (10 pcs)
1 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x Blind nut M4 (4 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x Blind nut M4 (10 pcs)
1 x 10 mm floating pad (72 pcs)
1 x Propeller balancer
1 x Medidor ángulos y/o incidencias
1 x Propeller balancer
1 x Steel brush wheel with 2.35mm
1 x Hot Glue Stick RED
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Savox Brushless Servo SC-1267 SG
1 x Servo SAVOX SW-1250 MG digi
1 x Surface Indicator Gauge Small
1 x 10 mm dogdrive props
1 x 1/10 Pilot "Jack"
1 x 12 mm dogdrive props
1 x Motor ACTRO 50-2-760
1 x 1/12 Pilot "Langley"
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x Y-Hose connector 4-4-4mm
1 x Sparkplug 1/4-32 Glow
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Spark plug key NGK MVVS
1 x Valvula One way
1 x TYGON tubo 1 m Diam. 3.4 x 2.0 mm
1 x TYGON tubo 15 m Diam. 3.4 x 2.0 mm
1 x Sparkplug ROSSI R8
1 x Bujia OS G5 gasolina
1 x Jeti Black cap
1 x Spark motor OS nº 8
1 x Sparkplug 1/4-32
1 x Sparkplug Saito 400
1 x Servo mounting frame SV-1260MG
1 x Servo SAVOX SA-128S SG
1 x Electronic fog horn
1 x 50 mm aluminium spinner (Kavan)
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x wire tensioner (blue)
1 x PT 21x13 EL Propeller 3 Blade
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x 64 mm aluminium spinner
1 x 3D Spinner for DLE 30
1 x Propeller MEJZLIK 20x13 Electric light (41 g)
1 x Motor ACTRO 35-4-1100
1 x Servo Robbe FS 128 BB MG HV Digital
1 x BOX-Setup Actro-marine
1 x Aqua RACE 70 (without motor)
1 x Fueraborda RETRO
1 x Servo Robbe FS 525 BB MG HV
2 x Soporte servo KST X08/H and Plus
1 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x Ø 50-60 mm canister holder
1 x Wire easy tensioner (silver)
1 x Birch plywood plate 600x300x1.5 mm
1 x Aluminium ignition bad (blue)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x PT 21x13 EL Propeller
1 x Aluminium battery holder red
1 x Cable coupler M3 (10 uds)
1 x SE Ring 200 mm (2 pcs)
1 x Socket Head Screw M2,5x12
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Threaded insert M5 (10 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Servo HITEC HS-85 MG
1 x 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel
1 x 32x9 mm foam standar KOVO wheel (2 pcs)
2 x Reguladro ACTROCON 60A
1 x FESTO connector M7 Quick 4 mm
1 x Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas
1 x T-Hose connector 3-3-3 mm
1 x Hose clips 6 mm
1 x Quick hose connector 4-3 mm
1 x Adjustable brass horn threaded M3
1 x Maxi Fuel Filter
1 x Receiver replacement antenna, approx. 85
1 x Fuel Fittings-Blue
1 x ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS CONNECTIONS
1 x HOPPER tank Digitech 100 ml
1 x HOPPER tank INTAIRCO iTrap 60 250ml 3x racor 6mm CLASSIC PRO
1 x 550 cc gasoline fuel tank complet
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x Hopper UAT Sebar 600 ml
1 x Hopper UAT Sebar 400 ml
1 x POLARON EX 800w charger
1 x Hose clamps 0.16-0.20in, (4 pieces)
1 x Pinion 24 - 3,2 mm
1 x 45 mm aluminium spinner.
1 x 73x24 mm hard foam KOVO wheel (2 pcs)
1 x 43x14 mm hard foam KOVO wheel (2 pcs)
1 x EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG
1 x Fuel dot V3 (Blue)
1 x Fuel line plug Small 2 pcs
1 x Tygon tube 6.35 - 3.18 mm 1m
1 x Manometer 4 mm
1 x Hopper 125 ml XICOY with support
1 x Extra hard 750 ccm complete gasoline fuel tank
1 x Transmitter GRAUPNER MZ-24 Pro
1 x Canopy Latch
5,109.27EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies