199.89EUR

MZ-12, 6 Channel HoTT
[GRAS1002]


Description:
This is Graupner/SJ mz-12 HoTT 2.4GHz 6 CH transmitter. It is Graupner/SJ’s unique telemetry technology in 2.4 GHz signal protocol that supports bi-directional data transmission and gives user real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference thanks to optimized frequency hopping broad channel sequence.

Graupner/SJ mz-12 combines an easy-to-use design with the incredible control of Graupner/SJ HoTT technology that is an ideal choice for anyone who is new to RC as well as the avid modeler on a budget.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. - Easy control high bright 8 LEDs
- Warning and alarm function throughout HoTT smart box - Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning throughout Optional Smart box
- Advanced HoTT wireless trainer system
- High-precision quad ball bearing gimbals(total 8 ea) lead the smooth and comfortable stick feeling - Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- Staying up to date with the latest Graupner/SJ Firmware
- Supporting additional 2 digital channels when using Graupner/SJ 8CH receiver
- 20 Model memories
- 2 Q.link functions
- 2 Model types(Helicopter, Airplane)
- Q.link function x 1
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (5-point)
- Heli mix function (Pitch-thro, Pitch-rudd, Rudd-thro, Aile-thro, Elev-thro, Gyro, Swash limit, Govenor, Govenor rate)
- Swash mix function
- Program mixing x 5
- Q.link function x 2
- Q.link trim function x 3
- 4 wing types
- 4 tail types
- Wing MIX function (diff aile, aile>>rudd, elev>>flap, flap>>elev, elev>>aile, flap>>aile)
- Programming mixing x 5

Specification:
- Dimensions: 184x259x96 mm
- Operating voltage: 3,4...6 V
- Frequency: 2400...2483,5 MHz
- All-up weight,approx: 575 g
- Modulation: FHSS
- Range approx: 4000 m
- Control function: 6
- Charging rate: 250 mA
- Temperature range: -10...+55 °C
- Aerial length: 120 mm



temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x ABS tube 9.0x8.0x1000 mm
2 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 5.0x4.0x156 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
2 x ABS tube 8.0x7.0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
2 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
3 x ABS tube 18.0x16.0x1000 mm
2 x ABS tube 16.0x14.0x1000 mm
2 x ABS tube 7.0x6.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
3 x ABS tube 3.0x2.0x1000 mm
2 x ABS tube 2.0x1.0x1000 mm
2 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x ABS tube 4.0x2.0x1000 mm
1 x ABS tube 4.0x3.0x1000 mm
2 x ABS tube 5.0x3.0x1000 mm
2 x ABS tube 3.0x2.0x330 mm
1 x Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
2 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
2 x ABS tube 5.0x4.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
2 x SE Ring 300 mm (2 pcs)
2 x SE Ring 240 mm (2 pcs)
2 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Ferrita 17x10x6.5 mm
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 450 mm (2 pcs)
1 x 
3 x SE Ring 330 mm (4 pcs)
3 x SE Ring 400 mm (2 pcs)
3 x Tape GFK 25 mm
3 x Tape GFK 50 mm
1 x SE Ring 250 mm (2 pcs)
5 x SE Ring 350 mm (2 pcs)
3 x Foil for sticking flaps and ailerons
2 x SE Ring HACKER 300 mm (2 pcs)
1 x Ferrita 14x8x5.5 mm
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
3 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x Tape GFK 38 mm
2 x Cinta Goldfix 1m
1 x Ferrita 27x14x7 mm
3 x Spikes Band (5 m)
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
2 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
2 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Para-RC Mix
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Wing OXY 0,5 pulgadas2
2 x Parachute P4
1 x Paramotor BackPack XXS (without accessories)
1 x Paramotor BackPack XXS 2
1 x Parachute BACKUP X100
1 x Paramotor Trike XL
2 x Trike XL motor set (motor+esc+prop)
1 x Parachute PV6 for F3J
1 x Propeller POWER-PROP 13x9 Izda
1 x 1/10 Pilot "Jimmy"
1 x Profile ABS half cane 2.5x1000 mm
1 x ABS tube 14.0x10.0x1000 mm
1 x SE Ring 480 mm (2 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x Waterproof adhesive tape, width 19mm, length 25m
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x ABS tube 20.0x18.0x1000 mm
2 x Transmitter Balancer Futaba T-10CG
2 x Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x Charger FUTABA SQN30W12P-08 220v
1 x TX-Tray V1 (L) (Red)
1 x Switch Cap L (silver)
1 x Switch Cap L (black)
1 x Marker ties (20 pcs)
2 x Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x Tray for FUTABA 18 SZ
2 x Switch Cap L (Red)
1 x Transmitter Balancer Futaba V
1 x Transmitter Balancer Futaba FF9-DX7-JR-Hitec
1 x SWTU2 switch
1 x Switch Cap L (Blue)
1 x Battery FUTABA 18MZ
1 x Decorative caps, multicoloured
2 x SE Ring 360 mm (2 pcs)
2 x Futaba Aero Large Case - Internal Foam
3 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x MZ-10, 5 Channel HoTT
1 x Beech dowels 3.0 x 1000 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Wheel collar 2 mm Ø (4 uds)
1 x Allen wheel collar M3x5
1 x Wheel collar 6 mm Ø (4 uds)
1 x Towing hook <3m
1 x Beech dowels 4.0 x 1000 mm
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Motor Mega AC 16/15/08
1 x Backmountset complete A40
2 x Ballast 700gr OPALE
1 x AXI 2826/6 V2
1 x PYRO 700-56L
1 x Motor Mega AC 16/25/06
1 x Motor Advance 50-6
1 x Axi for MVVS 3.5 Sport
1 x A40-10S V2 8-Pole + 6,7:1 PG
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x AXI 2808/20 V2
1 x Motor HP 220/30/A3 P4 5:1
1 x A60-6XS V4 28-Pole
1 x EDF Stream-Fan 110mm kv780
1 x Motor Mega AC 16/07/04
1 x AXI 2826/10 V2
1 x Motor Advance 30-10 F3A
1 x AXI 2808/20 V2 Long
1 x AXI 2808/16 V2 Long
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x Motor A30-14 M V2 6 Poles
1 x PYRO 700-45 Long Axi
1 x A30-M/L/XL Backmountset complete
1 x Axle for motor A20-S (3 uds)
1 x Wheel collar 5 mm Ø (4 uds)
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x Landing gear frontal support 29x26x13,5
1 x Pushrod octagone 4/3
1 x 38x4,5 mm wires output (2 pcs)
1 x MultiLog Altimeter
1 x 20x200 mm battery rings
1 x 20x1000 mm Ring Strap Back To Back
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Ring 320 mm length (5 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x Futaba Neckstrap
1 x Transmitter Stick Ends V5 Rojo - M3 Futaba/Hitec/Spektrum DX8 (2
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x 28 mm tailwheel unit
1 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Esc X-70-OPTO-Pro
1 x KIRA 600-30 6,7:1
1 x Q80-14XS F3A
1 x Receiver DUPLEX REX 3 2.4 GHz
1 x Esc X-75-OPTO-Pro
1 x AXI 5330/18 V2
1 x AXI 5345/18 HD V2
1 x Combo RAY C3542-1000 + ESC 60A
1 x Para-RC Trike "RC-Bullix"
1 x Tray for FUTABA 14SG/16SZ
2 x Switch Cap M (silver)
1 x Futaba S-Bus Rx/Gyro Link Lead
1 x Switch moment button, 2 functions, long FUTABA
1 x Switch Cap M (red)
1 x FPV Station for SE TX-Tray V1
1 x Switch Cap M (black)
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Antenna holder bracket double
1 x Transmitter Stick Ends V4 Blue- M3 (2 pcs)
1 x Servo Arm aluminium ALU-STAR
12,344.23EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies