430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Xplorer1 anemometro
1 x Xplorer4 anemometro
1 x Xplorer3 anemometro
1 x Xplorer2 anemometro
1 x SE Ring 480 mm (2 pcs)
1 x Marker ties (20 pcs)
1 x Cinta Goldfix 1m
2 x SE Ring 400 mm (2 pcs)
3 x Foil for sticking flaps and ailerons
1 x SE Ring 240 mm (2 pcs)
1 x SE Ring 200 mm (2 pcs)
3 x Spikes Band (5 m)
1 x 20x1000 mm Ring Strap Back To Back
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x SE Ring 350 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x Ring 320 mm length (5 pcs)
2 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x SE Ring 360 mm (2 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x 
2 x 5 mm Prop Adapter M8
1 x Oracover CHROME 2m
1 x Oracover Yellow CUB 2 m
1 x Oracover Red 2 m
1 x Oratex Red Fokker 10 m
1 x Oracover Yellow CADMIO 10 m
1 x Oracover Azul Cielo 2 m
1 x Monokote ROJO misil (1.8x0.65m)
1 x Ply-Span 450x600/13g Blue
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Oracover Orange 2 m
1 x Oracover ROYAL RED 2m
1 x Oratex Silver 2m
1 x Oratex Natural White 20m
1 x Oracover CARBON Metalic 1 m
1 x Ply-Span 450x600/13g White
1 x Oracover White 10 m
1 x Oracover GREY Seafire Sea 2m
1 x Oracover Verde 2 m
1 x Oratex White 2m
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Oracover Yellow CUB 10 m
1 x Oratex Yellow Cub 10 m
1 x Oracover Yellow CADMIO 2 m
1 x Oracover Azul 2 m
1 x Oratex Natural White 2m
1 x Oracover light Grey 2m
1 x Motor DLE 170 M- Paramotors
1 x Ventral support for AX-18/AX-60
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Short ball link M1.6 (6 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Propeller POWER-PROP 12x6
1 x 20x13 Falcon electric carbon prop (64g)
1 x 20x200 mm battery rings
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x SE Ring 300 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Tape GFK 50 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Tape GFK 38 mm
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x White 2,4 GHz antenna exit guides (2 pcs)
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x 19 mm 2:1 black termoretract tube
1 x Oracover Brown 2 m
1 x 89 mm INO spinner (carbon imitation)
1 x 51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x Falcon Carbon Spinner 82mm for electric motor
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Quick hose connector 6-4 mm
1 x Manometer 4 mm
1 x POLARON EX 800w charger
1 x Beech dowels 4.0 x 1000 mm
1 x Transmitter GRAUPNER MZ-24 Pro
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Propeller hub spacer 8/5.5
1 x Propeller APC 12x10 Glow/Gas
1 x Propeller APC 10x6 Electric
1 x Propeller APC 10x10 Electric
1 x 51 mm INO spinner (carbon imitation)
1 x 102 mm INO spinner (carbon imitation)
1 x Spinner INO 82 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x Spinner INOVA 102 mm Black
1 x 70 mm INO spinner (carbon imitation)
1 x 57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x Spinner INO 57 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x Cono NUT 5/16"x 24 -M4
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x F3A carbon 95 mm spinner
1 x F3A carbon 85 mm spinner for AXI
1 x 75 mm INO spinner (carbon imitation)
1 x 57 mm INO spinner (carbon imitation)
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Propeller Pleg CAM-Prop 8x6
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x MZ-10, 5 Channel HoTT
1 x Beech dowels 3.0 x 1000 mm
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x Propeller G-Sonic 20x8
1 x Canopy Latch
1 x Beech dowels 2.0 x 1000 mm
1 x Transmitter Crystal 35 Mc/s Ch 77
6,972.98EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies