430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 1/6 Pilot "Garry"
2 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Pilot JAN 1/4 Saiplanes
1 x Piloto Jet "Green" 1/6 Scale
2 x Pilot "Duke" Legends Series (Slimline)
1 x Pilot "Adolf" Legends Series (Slimline)
1 x 1/6 Pilot "Tony"
1 x 1/6 Pilot "Cindy"
1 x 1/6 Pilot "John"
1 x 1/10 Pilot "Jack"
2 x Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x 1/12 Pilot "Langley"
1 x Piloto jet 130 mm
1 x 1/12 Pilot "Cougar"
1 x Piloto Jet "Red" 1/6 Scale
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x 1/10 Pilot "Jimmy"
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x ABS Strip 1.0x2.0x1000 mm
2 x ABS Strip 1.5x3.0x1000 mm
2 x Strip 3,5x1,75x330 mm
1 x Round Rod 3,0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Round Rod 2,5x1000 mm
2 x SE Ring HACKER 300 mm (2 pcs)
3 x SE Ring 400 mm (2 pcs)
4 x Tape GFK 38 mm
1 x Cinta Goldfix 1m
2 x Ring 320 mm length (5 pcs)
2 x Spikes Band (5 m)
3 x SE Ring 200 mm (2 pcs)
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x SE Ring 450 mm (2 pcs)
2 x 20x200 mm battery rings
2 x Marker ties (20 pcs)
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x SE Ring 250 mm (2 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x SE Ring 330 mm (4 pcs)
3 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
2 x Beech dowels 2.0 x 1000 mm
2 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
2 x Linden wood slat 2.0x2.0x1000 mm
2 x BALSA triangular 10x10x1000 mm
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Oracover White 2 m
1 x Motor DLE 200cc Premium Muffler
1 x EasyFLY Addon
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
2 x Foil for sticking flaps and ailerons
1 x SE Ring 360 mm (2 pcs)
1 x Lite Plywood panel 600x300x3.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
2 x A/C quality beech plywood 600x300x5.0 mm
2 x Strip ABS 2.0x3.0x1000 mm
2 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.0x3.0x1000 mm
2 x Strip 1,5x1,5x330 mm
1 x Strip 2,5x1,25x330 mm
1 x ABS I Strip 10x5x1000 mm
2 x 800TVL CMOS camera for FPV
1 x Round Rod 6,0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x ProgBOX MASTER Hacker
2 x SE Ring 240 mm (2 pcs)
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 300 mm (2 pcs)
2 x 20x1000 mm Ring Strap Back To Back
1 x 
1 x Jeti Box mini
1 x PROFI Box JETI
1 x Vest clothes Hispano Aviación
1 x Tape GFK 50 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
3 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Balsa panel 2.5x100x1000 mm
1 x 460 mm EPP Floats
1 x Nylon gear block Ø 5 mm (2 uds)
1 x BALSA trip 4.0x4.0x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Hose stopper 4 mm
1 x 120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Landing gear clamp for Ø 3 mm (4 uds)
1 x BALSA trip 3.0x5.0x1000 mm
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x BALSA leading edge 8x10x1000 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Faucet FESTO
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x Birch plywood plate 600x300x4.0 mm
1 x Pilot "Dick" Legends Series (Slimline)
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x EME 55 cc carburetor WALBRO
1 x Softshell Hispano Aviación
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x MZ-18, 9 Channel HoTT
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Manometer 4 mm
1 x Spark motor OS nº 3
1 x Canopy Latch
1 x MZ-12, 6 Channel HoTT
1 x Retract undercarriage for gliders up to 3,5 Kg
1 x Set freno para ruedas Dia. 127 mm
1 x Hose clips 6 mm
1 x Extension Arm for Carburetor (red)
1 x Reed valve for DA 50-R
1 x Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x Motor Mount for TITAN ZG45 and ZG62, length 72 mm
1 x Pick up DA50/100/150
1 x Adjustable brass horn threaded M3
6,735.38EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies