430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 1000 ml sealer (DOPE)
1 x Spray adhesive AEROFIX 2
1 x 500 ml sealer (DOPE)
1 x Presto SF Light Filler styrene-free (420 g)
1 x 
1 x 20 g tin paste
1 x Universal Colour Paste deep black 250 g
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Partall paste 650 g
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Spray EC Red 400ml
1 x Plasti Dip Liquid Tape 429 ml black
1 x Paint gun for sprays
1 x Painting GHT Lexan Black 150 ml
1 x Nitroverdu 500 ml
1 x Hobbylite Filler, Balsa colour
1 x Stickers-digit for marking
1 x Red smoke canister 100 g
1 x "S" set for planes
1 x Yellow smoke canister 65 g
1 x Yellow smoke canister 100 g
1 x Parachute expulsion foam
1 x Green smoke canister 140 g
1 x White smoke canister 140 g
1 x Black smoke bombs AX-60 (5 pcs)
1 x B4-0 rocket charges (6 pcs)
1 x "M" set
1 x Yellow smoke canister 140 g
1 x Red smoke canister 65 g
1 x White smoke bombs AX-60 (5 pcs)
1 x Initior Receiver FRX2 Wireless
1 x White smoke bombs AX-18 (5 pcs)
1 x Smoke set "Glider"
1 x AX-60 starters (5 pcs)
1 x Green smoke canister 100 g
1 x Parachutist
1 x Smoke set "S"
1 x AX-60 starters (5 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Extension silicon 50 cm (Graupner)
1 x Round Rod 3,0x1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
2 x PowerPack 2.5X2 PRO
2 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
2 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x RX Battery Eneloop 4,8 V JR 2500 mAh
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
2 x Sanyo TX Battery Eneloop 9,6 V Hitec
1 x Sanyo RX Battery Eneloop 6,0 V FUT
1 x Sanyo RX Battery Eneloop 6,0 V JR
2 x Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x Release wax 250ml
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x 64 mm aluminium spinner
1 x Electric Landing Gear ASPIRE (Elektron Retracts)
1 x SKY RC T400Q Charger 4x100w
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x ASPIRE Red ARF 2.000 mm, Fuselage
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x Battery RX JETI LiIon RB 3100 7.2v
1 x Battery RX JETI LiIon RB 5200 7.2v
1 x Battery RX JETI LiIon RB 6200 7.2v
1 x Electric Landing Gear ODYSSEY
1 x F-16 Falcon Black Knights 1:6 (1630 mm)
1 x HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x Motor Mega AC 16/10/03 RACE
1 x Motor Mega AC 16/07/03
1 x AXI 2217/20 V2
1 x AXI 2808/20 V2
1 x AXI 2814/6D V2
1 x Motor Mega AC 16/07/12
1 x Conector JR Servo male (50 pcs)
1 x Crimping tool
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x AXI 2826/10 V2
1 x Motor Mega AC 16/15/04
1 x Jun-Si iCharger 4010 Duo
1 x Motor Mega AC 16/25/04
1 x AXI 2820/12 V2 Long
1 x Bird (Aero-naut)
1 x Motor Mega AC 16/25/06
1 x Motor Mega AC 22/30/03
1 x AXI 2826/12 V2 Long
1 x AXI 2814/20 V2 Long
1 x AXI 2826/10 V2 Long
1 x Motor Mega AC CAR 10 PRO
1 x Set stickers JEEMO "Andy"
1 x Motor Mega AC 16/15/05 CE F5J
2 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
2 x Charger LiPo Charger4
1 x AXI 2212/20 V2
1 x Motor Mega AC 22/30/02
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x Motor Mega AC 16/35/01
1 x Rocket cardboard tube 25mm x 24mm x 230mm
1 x Adapter lead MPX/XT60
1 x MPX-Dean "T" Adapter
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x PowerBox Smokepump
1 x External LED's (2 pcs)
1 x Adapter 5,0 mm M8
1 x Charging Extension 50cm for 2 Battery
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x RX Battery Eneloop 6,0 V JR 2500 mAh
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x 10m servo "Premium" wire (white/red/blue)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x Jet Pipe for ULTIMATUM 2m
1 x Set Stickers Ultimatum 2.0 - Andy Folienwelt
1 x Receiver FUTABA R6004 FF FAST
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x Canopy Latch
1 x MZ-12, 6 Channel HoTT
1 x Decorative caps, multicoloured, short
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Propeller 3x2
1 x Propeller 11x4,7 SlowFlyer
1 x Propeller 12x6 Falcon electric
1 x 20x15 Falcon electric V2
1 x Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver
1 x Receiver R7008SB FASSTest
1 x 2 LiPo XH>EH adapter
1 x Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS
1 x Ant. Cable R606/17/08/14FS L:1500mm
1 x 2,5x60 mm allen screwdriver
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Coupling bush 5 - 5 mm
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Flap hinge 33x9 mm (6 pcs)
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x Foreman, scale 1:32
1 x Hardener Aero EPH 161 (500 g)
1 x MEKP Harderner 100 g
1 x Hardener Aero EPH 161 (250 g)
1 x Propeller G-Sonic 20x8
1 x Propeller Pleg CAM-Prop 8x6
1 x Transmitter GRAUPNER MZ-24 Pro
1 x Hose clips 6 mm
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Flap hinge (6 pcs)
1 x resin-hardener package L-385 with hardener H-385
1 x Adjustable brass horn threaded M3
1 x Beech dowels 4.0 x 1000 mm
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x Aluminium sheet 500x250x0,5mm
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x White gelcoat 1 Kg
1 x Foam plastic plates (310x210x2 mm)
1 x resin-hardener L-385 H-385 (625 g)
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x resin-hardener L-385 H-385 (1250 g)
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
19,383.99EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies