430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Spinner plastic black fixed propeller 30 mm
2 x 42 mm white plastic spinner for fixed propeller
1 x Spinner plastic white fixed propeller 30 mm
1 x 36 mm red plastic spinner for fixed propeller
1 x 45 mm white plastic spinner for fixed propeller
1 x 50 mm black plastic spinner for fixed propeller
1 x 45 mm black plastic spinner for fixed propeller
1 x 36 mm white plastic spinner for fixed propeller
1 x 40 mm white plastic spinner for fixed propeller
1 x Screwdriver for Torx® TX6
1 x Liston HAYA 8 x 8 x 1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
2 x Digital scale up to 40 kg
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Dust collector for mould cleaning
1 x 2,5x60 mm allen screwdriver
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Starter EM Gear Power 250
1 x BALSA leading edge 8x10x1000 mm
1 x 3,0x60 mm allen screwdriver
1 x Screwdriver for Torx® TX8
1 x Vacuum pump P1-N
1 x Digital precision scale up to 2000 g
1 x Z Bender - S Type Tool
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Hot Glue Stick BLACK
1 x Vacuum pump 12 CFM
2 x Linden wood slat 3.0x3.0x1000 mm
2 x Starter EM Gear Power 80
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Crimping tool
1 x BALSA trip 10x10x1000 mm
1 x Screwdriver for Hexagon 1,5mm
2 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Starter 12v (Max 90 and 15ccm)
1 x Beech dowels 10 mm x 1000 mm
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Walnut wood slat 2.0x2.0x1000 mm
2 x Liston HAYA 3 x 10 x 1000 mm
1 x BALSA triangular 6x6x1000 mm
2 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Trailing edge BALSA 35x8x1000 mm
1 x 
1 x Ball Link Plier
1 x Beech dowels 4.0 x 1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x 1,5x50 mm allen screwdriver
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Starter 12v (Max 180 and 30ccm)
1 x BALSA trip 8.0x8.0x1000 mm
2 x Crimping tool
1 x Starter Sullivan-STAR 601
1 x Pine wood slat 2.0x2.0x1000 mm
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger transmitter GRAUPNER
1 x 2 LiPo XH>EH adapter
1 x CM-3
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Red smoke canister 65 g
2 x Blue smoke canister 140 g
1 x Yellow smoke canister 140 g
1 x White smoke bombs AX-18 (5 pcs)
1 x Smoke set "M"
1 x PCARD Wireless System
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Black smoke bombs AX-60 (5 pcs)
2 x 3l Smoke oil
1 x Electric rocket starters (6 pcs)
1 x "S" set for boats
2 x Initior Transmitter FTX2 Wireless
1 x Blue smoke canister 100 g
2 x Extension silicon 30 cm male (Graupner)
1 x Cabel "Y" 30 cm (Futaba)
1 x Extension silicon 10 cm (Futaba)
1 x Extension silicon 35 cm male (Futaba)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Premium servo extension 100cm
3 x Cable S.BUS 3 salidas 100 mm
1 x Circlick securite
2 x Extension silicon 100 cm (Graupner)
1 x Extension lead 15 cm Multiplex
1 x Extension silicon 30 cm female (Graupner)
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Cabel "Y" 30 cm (graupner)
1 x Futaba male 40 cm extension
2 x Premium servo extension 50cm
1 x Extension 100 cm (Futaba)
1 x Prolongador S-Bus JR/JR 10cm
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
2 x Cable S.BUS 3 salidas 300 mm
2 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension 15 cm (Futaba)
1 x Extension silicon 100 cm (Futaba)
2 x Prolongador S-Bus JR/JR 20cm
1 x Extension silicon 10 cm (Graupner)
1 x Premium servo extension 25cm
1 x Futaba Female 40 cm extension
1 x Glases Ace
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
2 x Mini-handed clamp
2 x Kwik link unmount tool
1 x BALSA trip 5.0x5.0x1000 mm
2 x Heli blades angle measurer
2 x Mold plugs XT-90
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
2 x Mold plugs XT-30
2 x PROXXON - SAW BLADE DIAMOND OZI/E
1 x PROXXON - SAW BLADE (50MM - 20T) (28017)
2 x Balsa panel 2.5x100x1000 mm
1 x Smart Soldering Iron 110W/230V AC
2 x MPX plug mold V1
1 x Dremel PERMAGRIT thin lime
1 x Universal Filter
1 x Styrene plate 320x120x1.0 mm
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Chopped glass fibre strands 3 mm
1 x Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x Z Bender - S Type Tool
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Chopped glass fibre strands 3 mm
1 x Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x BALSA trip 4.0x4.0x1000 mm
1 x Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Parachutist
2 x Hexagonal ball head 2.0 x 50 mm
1 x Extension MPX-MPX 20 cm
1 x Oracover light Grey 2m
1 x White smoke bombs AX-60 (5 pcs)
1 x Green smoke canister 65 g
1 x 2,0x50 mm allen screwdriver
1 x Green smoke canister 100 g
1 x Red smoke bombs AX-60 (5 pcs)
1 x Parachute expulsion foam
1 x AX-60 starters (5 pcs)
1 x Smoke set "S"
1 x Remote electric ignition system
1 x 200 mm extensión servo HITEC/JR
2 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Futaba Female 40 cm extension
1 x MG cannon 1.8 cm (5 pcs)
1 x Aero-Master Cabine (Aero-naut)
1 x Tirpiz Battleship 1:200
1 x Extension silicon 30 cm male (Futaba)
1 x Cabel "Y" 15 cm
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Extension PVC 150 cm (Graupner)
2 x Heat Seal Iron
1 x Sealing Iron Profi LCD
1 x PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E
1 x Hot Glue Stick RED
1 x Hot Glue Stick GREEN
1 x Heli digital angle measurer
1 x VIPER JET G2 Esq. 5 Green/White/Blue
1 x Lite Plywood panel 600x300x3.0 mm
1 x Foam plastic plates (310x210x2 mm)
1 x VIPER JET G2 Esq. 2 White/Red
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x USB Charger 12V DC for car
1 x Propeller diller 5/6,3/8/9
1 x PERMAGRIT Sanding Block 45° 140x51 mm
1 x Mini Lock Grips 2PCS
1 x Propeller drill jig DA 100/85/120/150/200 and VM 60-210
2 x Mini Infrared Thermomiter
1 x HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x Propeller diller for EME35 and DLE35
1 x Propeller diller for DLE111 and DA85-150
1 x Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x 9x4.7 * 22x12 carbon propeller
1 x Propeller drill jig DA-35/50/60/70
1 x Propeller diller for DA50, DLE55 red
1 x VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x Precision wrench L100 mm
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x Heli blades angle measurer
1 x Pipa 3D F-16 Scale 1/6
1 x Spikes Band (5 m)
1 x VIPER JET G2 Esq. 3 Orange/Black
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x Propeller G-Sonic 20x8
1 x Decorative caps, multicoloured, short
1 x Foreman, scale 1:32
1 x VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x Conector JAPAN G2 Set 5 pares
1 x Birch plywood plate 600x300x2.5 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Charger LiPo Charger4
22,869.62EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies