430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x CC 02
1 x 30 cm BEC cable (female)
1 x Connector Sub-D 2+5 Female
1 x Connector CAN 15
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x CC 05
1 x Double conector with JR adapter and 200 mm extension
1 x APM2.6 Power module with 5.3V DC BEC
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x BEC 3A FOXY
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Circlick securite
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x 4 LiPo XH>EH adapter
1 x 3 LiPo XH>EH adapter
1 x 2 LiPo XH>EH adapter
1 x DPS Switch JR/JR
1 x Connector Sub-D 2+5 Male
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Locking cable tie 3.2x142 (uds)
1 x One touch canopy lock
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Steering arm 16 mm Ø 4 mm
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Screw-lock connector M2 (2 uds)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Canopy Latch
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Electric spoiler 250 mm (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x 30 cm BEC cable (male)
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Coupling bush 5 - 5 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Adjustable brass horn threaded M3
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Decorative caps, multicoloured, short
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Contest-S-Pult-Carbon mc-20/mc-24
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x 40,0 mm hydro-propeller (left hydropropeller)
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Bearing block for noseleg landing gear
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Extension 5 lipos JST - JST/C
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Rubber bushing with bracket "B" type (2 pcs)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Mudguard for 140/165 mm wheels
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Turbina KINGTECH K320 G5
1 x Turbine HORNET 85 SE
1 x Turbina KINGTECH K120 G4
1 x KingTech K100TP G4+ Turboprop
1 x Battery LiFe -3000/25C-3S 9.9V
1 x Turbine RABBIT 100 SE 11 Kg
1 x BLUE Colored Liquid smoke for turbine 0.75 l
1 x Wheel collar 5 mm Ø (4 uds)
1 x Wheel collar 4 mm Ø (4 uds)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Wheel collar 3 mm Ø (4 uds)
1 x Turbina KINGTECH K70G4
1 x KingTech Turbineoil 1L
1 x Bomba KP500V Kingtech
1 x KingTech K45TP G4 Turboprop
1 x Burner Plug K30/ K45
1 x GSU Kingtech
1 x Turbina KINGTECH K142 G4M
1 x Battery LiFe -2100/25C-3S 9.9V
1 x Covered closure or fairings
1 x Adapter 3,0 mm M6
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Adapter 5,0 mm M8
1 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x Beech dowels 3.0 x 1000 mm
27,348.14EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies