430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x L-Connector 4.0 mm x 1000 mm
2 x 290 mm 290 mm M5x18 mm shaft ship
1 x Kardan Black (without pinions)
1 x Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
2 x Propeller RABOESCH M4 45 mm (3 Blades pr) (Right)
1 x Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x Rigid coupling brass Ø 2 mm L: 15 mm
3 x 270 mm 3/3 mm shaft ship
1 x Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller)
1 x L-Connector 1.0 mm x 1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller)
1 x U Profile ABS 1,0x2,0x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x Rigid coupling brass Ø 3 mm L: 20 mm
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x 290 mm M4 7/8x212 mm shaft ship
1 x Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x 290x4 mm M4 shaft ship
2 x U Profile ABS 2,0x4,0x1000 mm
1 x Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller)
1 x Spare Shaft Ø4mm L:450x23mm M4
1 x Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller)
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Rudder 107-06
2 x Rigid coupling brass Ø 4 mm L: 25 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller)
1 x Extractor piñones 2.3/3.2 mm
1 x ABS I Strip 20x10x1000 mm
2 x ABS Strip 1.0x5.0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Balsa panel 2.5x100x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x Balsa panel 1.0x100x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x LOWER TOW HOOK
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
2 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x SE Ring 250 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 
1 x SE Ring 350 mm (2 pcs)
2 x SE Ring 330 mm (4 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x Tape GFK 25 mm
1 x Ring 320 mm length (5 pcs)
2 x SE Ring 480 mm (2 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 240 mm (2 pcs)
1 x Tape GFK 38 mm
1 x Cinta Goldfix 1m
1 x SE Ring 200 mm (2 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Foil for sticking flaps and ailerons
1 x Spray EC Red 400ml
1 x 800TVL CMOS camera for FPV
1 x PPM Encoder Module
1 x 1/6 Pilot "Buddy"
1 x Conector Servo female 4 pines
1 x Blue silicone 0,5 qmm wire (50 m)
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Gracia Maxi ARF, bags (Top Model)
1 x Antenna holder bracket double
1 x Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x Adap/Exten for Futaba 12-14C
1 x 4 mm Prop Adapter M6
1 x 5 mm Prop Adapter CN-Spinner
1 x XICOY X45 rail
1 x 2 mm Prop Adapter M6
1 x 3.2 mm Prop Adapter M8
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x ABS rectangular profile 12x6.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x BABY glider (Aero-naut)
1 x Coupling for 3,2 mm axis
1 x Profile ABS Square 2 x 1000 mm
1 x Round Rod 1,25x1000 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x Glider PIROL
1 x Strip ABS 2.0x3.0x1000 mm
1 x Coupling for 3 mm axis
1 x ABS "T" angle 8.0x8.0x1000 mm
2 x Chili Race F3K 2 wing servo mounted(carbon biax)
1 x Chili F3K 2 wing servo mounted
1 x Strip 2,0x2,0x330 mm
2 x 120x60 mm SLH KOVO wheel
1 x Strip ABS 2.0x5.0x1000 mm
1 x VAGABOND 1500 mm ARF V2 (Red)
1 x TAKEO 3.6m electric
2 x 290 mm M5 Prop shaft
1 x Head core bushing
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Blade holder metal LAMA
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x Blade Holder Full (4 blades)
1 x Head lower part
1 x Cierva C30 simulated motor
1 x Complet landing gear
1 x 
1 x ORACOVER Ferrari red (2 m)
1 x Screw M2.5x10 (10 pcs)
1 x Hexagonal Nut M3 (10 pcs)
1 x Screw M3x12 (10 pcs)
1 x Pan Head Screw M2x8 PH countersunk head
1 x Pan Head Screw M2x6 PH
1 x Pan Head Screw M1,6x6 (10 pcs)
1 x Screw M2.5x5 (10 pcs)
1 x Tapping Screw M2.2x9.5 (10 pcs)
1 x Nut for mounting M4 (4 pcs)
1 x Swashplate metal LAMA
1 x 
1 x Blade holder upper
1 x Head runner
1 x Motor mount class 48"
1 x Indoor Brushed motor kit
1 x Fuselage Autogyro RAINBOW
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Screw M3x16
1 x Screws flush mount M2
1 x Baering 3x8x4
1 x Raer wall
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x SE Ring 450 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring HACKER 300 mm (2 pcs)
2 x Transmitter Crystal 35 Mc/s Ch 62
1 x Mudguard for 140/165 mm wheels
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Propeller APC 13x4 Electric
1 x Propeller APC 13x4 Electric Pusher
1 x Propeller APC 10x7 SF
1 x Propeller APC 10x5.5 MR Electric multirrotor
1 x White 2,4 GHz antenna exit guides (2 pcs)
1 x Propeller RABOESCH M4 60 mm (5 Blades) (Right hydropropeller)
1 x Canopy Latch
1 x Adjustable brass horn threaded M3
1 x Propeller RABOESCH M4 55 mm (5 Blades) (Left hydropropeller)
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x MZ-10, 5 Channel HoTT
1 x Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller)
1 x Thruster propeller 30/33 mm with motor 400 7,2V
1 x X-RAY Micro QR (Fuselage with canopy)
1 x Propeller RABOESCH M5 80 mm (4 Blades) (Left hydropropeller)
1 x X-RAY Micro QR (Elevator)
1 x Flap hinge (6 pcs)
1 x MZ-12, 6 Channel HoTT
1 x EXTRA NG 85" 2159mm red/white
1 x Propeller G-Sonic 20x8
1 x Set stickers JEEMO "Andy"
1 x Motor OS 3805-1200 electric
2 x Motor OS 3820-1200 electric
1 x Fox 4000 mm Airworld,cabina
1 x Fuselage Bags JEEMO
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Jeemo Dolly
1 x PRESTIGE 2PK
1 x Propeller APC 12x6 Electric Pusher
1 x Propeller APC 12x3.8 SF
1 x Propeller APC 11x10 Electric
1 x Propeller APC 10x4.7
1 x Propeller APC 11x4.7 SF Pusher
1 x Propeller APC 11x4.5 Electric Pusher
1 x Propeller APC 12x10 Electric
1 x Propeller APC 10x4.7 SF Pusher
1 x Propeller APC 10x6 Electric
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x Propeller APC 11x5.5 Electric
1 x Propeller APC 11x8.5 Electric
1 x Propeller APC 11x7 SF
1 x Propeller APC 12x8 SF
1 x Propeller APC 12x6 SF
1 x Propeller APC 13x8 Electric
1 x Propeller APC 14x10 Electric
1 x Propeller APC 10x7 Electric
1 x Oracover Red 2 m
9,322.87EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies