580.00EUR

Transmitter GRAUPNER MZ-24 Pro
[GRAS1006.77]


Description
The English version including the English menu and output speech data.
German, French and English version are included on the micro SD card and can be installed easily.

The MZ-24 HoTT with 12 control functions enables the advanced RC model builder to control nearly any model. The use of Graupner HoTT 2,4 GHz transmission technology ensures great functional reliability through bidirectional communication between transmitter and receiver with integrated telemetry, voice output via speaker or headphone output and ultra-fast response times of the control. The transmitter has 30 model memories. Programming and telemetry display on 3.5 "large TFT color touch screen. Storage of telemetry data and expansion of the model storage on a micro-SD memory card.
USB port for firmware upgrades.

Characteristics:
HoTT (HOPPING TELEMETRY TRANSMISSION) bidirectional 2.4 GHz technology 75 jump frequencies for secure transmission 12 channels
3.5" TFT colour touch screen for easy operation
Smart voice announcement system for telemetry data, warnings, alarms and vario signal via speaker or earphones
Real-time data transmission with optional sensors (vario, GPS, fuel, temperature, voltage, current, speed and much more)
Wireless or wired teacher/pupil system
Linking of multiple receivers in parallel possible
High-precision quad ball bearing gimbals (8 in total)
µSD card slot for expanding model memory and recording telemetry data
30 model memories
Model copy function
Update capability via USB
Model type: helicopter, model aircraft (normal or delta), model glider
Numerous servo settings (distance, limits, reversal, mid-point setting)
Dual rate and expo, can be set separately for each flight phase
6 flight phases
Helicopter type: 1 servo, 2 servo 180°, 3 servo 120° (2 pitch or 2 roll), 3 servo 140°, 4 servo 90°
Pitch curves (7 points) can be set separately for each flight phase
Throttle curves (7 points) can be set separately for each flight phase
Phase trim for pitch and throttle
Swash Limit function
Swash Limit function
5 x linear mixers
3 x curve mixers
Numerous types of model aircraft from 1 aileron to 8 flaps (1 aileron, 1 aileron/1 flap, 2 ailerons, 2 ailerons/1 flap, 2 ailerons/2 flaps, 2 ailerons/4 flaps, 4 ailerons/2 flaps, 4 ailerons/4 flaps)
Elevators: 1 elevator, 2 elevators, V-tail
Aileron differentiation, can be set separately for each flight phase Butterfly function
New Software Features:
New menu for channel sequencer
Additional model types for car, boat and copter
New menu for logical switches
New menu for announces, flight phase names will be announced when switched, to any switch can be assigned any favorite announce, landing gear in/out, flaps up/down, teacher, pupil, etc'
Up to 10 user voice files can be played and assigned in the transmitter
The HF icon of the start display is now usable, HF can now be switched ON/OFF after a safety query
The display can now be locked through an icon
Both timers are freely configurable by the user, reset function through switch/button or by briefly touching the number field, if the number field is tapped for longer time, you enter the timer menu
Data log start through timer 1, through a new button in TX ctl menu you can set an automatic recording, which starts when the model is switched on
The Thr.CUT function can also be used for helicopters, the motor/engine can be switched off in any throttle position
The Thr.CUT function warning is now switchable, it is now warned also when the Thr.CUT function is not active
3 different D/R, EXP values can be switched through a 3 position switch
All the warnings are now usable according to the model memory, it means you can have different warnings for each model memory
The switching off of the trimming for mixed channels is possible in the Prog.MIX menu
A reduction of the aileron differentiation is possible Snap Roll for glider and airplane models
The CTL Set menu has been adjusted to the control setting menu of the MC/MX-radios, settings for OffSet and +Travel- are not performed any longer in the D/R, EXP menu
Auto Trim function added

The Set contains:
MZ-24 PRO transmitter (mode 2 preadjusted)
5000mAh Li transmitter battery
Transmitter charger
SD card adapter
Micro SD card
Receiver GR-18 #33579
USB cable
USB PC Adapter Interface
USB adapter cable
Transmitter straps
Aluminum case
Quick manual (Part 1) / Programming manual (Part 2) download Info
Safety:

FHSS, frequency hopping over up to 75 channels
Maximum interference immunity through optimised frequency hopping, wider channel spread and antenna diversification
Intelligent data transfer including error correction
Extremely wide range
Range test and warning function
Undervoltage warning
Extremely wide receiver operating voltage range of 3.6 V to 8.4 V (functional up to 2.5 V)
Numerous fail-safe functions
Key lock function to prevent unintentional changes to menus

Precision:
Shorter response times can be set (10 ms period time)
No additional delays due to module processors All hopping management is handled directly by the 32 bit main processor.
Synchronous servo operation made possibleby simultaneous control of servo outputs in blocks of 4

Pilot feeling:
Essentially delay-free control responses due to direct processing
Real-time telemetry evaluation
Wireless teacher/pupil function

Other features:
Simple and extremely fast binding
Free channel assignment (channel mapping), transmitter and receiver mixer functions and all servo settings are simple to program
Binding of any number of receivers for channel expansion (16 channels maximum) The last receiver bound sends the telemetry data.
Update capability via USB interface guarantees future viability

Specification
Control function: 12
Width [mm]: 194 mm
Height [mm]: 115 mm
Temperature range [°C] : -10 - +55 °C
Aerial length [mm]: 120 mm
All-up weight [g]: 970 g
Frequency : 2400 - 2483,5 MHz
Range approx. [m] : 4000 m
Overall length [mm]: 205 mm
Dimensions [LxWxH in mm]: 205 x 194 x 115 mm
Modulation: FHSS
Current consumption [mA]: 670 mA
Operating voltage neutral [V] : 3,4 - 6 V
Batteries or accumulators included?: Yes
Total weight of Lithium Ion packs in the package: 100 g
Battery / accumulator chemical composition: LiPo
Battery, Lithium Ion Battery name energy in Watt per hour: 18,5 W
Teacher- / student-system: Yes
Voice output: Yes
Flight phase: Yes
Channels: 12
Micro SD: Yes
Telemetry capable: Yes
Mixer: Yes
USB connection: Yes
Model memory: 30
Transmitter type: Hand
Transmitter series: mz


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies