119.90EUR

MZ-10, 5 Channel HoTT
[GRAS1001]

Description:
This is Graupner/SJ mz-10 HoTT 2.4GHz 5 CH transmitter. It is Graupner/SJ’s unique telemetry technology in 2.4 GHz signal protocol that supports bi-directional data transmission and gives user real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference thanks to optimized frequency hopping broad channel sequence.

Graupner/SJ mz-10 combines an easy-to-use design with the incredible control of Graupner/SJ HoTT technology that is an ideal choice for anyone who is new to RC as well as the avid modeler on a budget.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. - Easy control high bright 8 LEDs
- Warning and alarm function throughout HoTT smart box - Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning throughout Optional Smart box
- Advanced HoTT wireless trainer system
- High-precision quad ball bearing gimbals (Total 8 ea) lead the smooth and comfortable stick feeling
- Staying up to date with the latest Graupner/SJ Firmware
- Multi binding receiver system that 2 receivers can be connected in parralled to use additional servos
- Dual rate function
- 3 wing types (Delta wing, 2 Aileron, V-tail)
- 4 stick modes (MODE 1, MODE 2, MODE 3, MODE 4)

Specification:
- Dimensions: 184x259x96 mm
- Operating voltage: 3,4...6 V
- Frequency: 2400...2483,5 MHz
- All-up weight,approx: 51 g
- Modulationç: FHSS
- Range approx: 4000 m
- Control function:5
- Charging rate: 130 mA
- Temperature range: -10...+55 °C
- Aerial length: 120 mm

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	Ventus 1:4 set of instruments
2 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Jeti Black cap
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
2 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 3.0x2.0x330 mm
2 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
2 x	Propeller POWER-PROP 14x9 Izda
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Propeller POWER-PROP 13x9
1 x	Round Rod 5,0x1000 mm
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	ABS I Strip 10x5x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	15 mm reinforced hinge
1 x	Round Rod 1,25x1000 mm
1 x	Long pinned hinge (12 uds)
1 x	Round Rod 6,0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Round Rod 4,0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Gates hinge
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Round Rod 1,5x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Miniature brass strap hinge, 1 m
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
2 x	Strip ABS 2.0x8.0x1000 mm
1 x	One touch canopy lock
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Canopy Latch
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Cockpit plastic closing
2 x	Steering arm 16 mm Ø 4 mm
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Horn for flap control (1 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	MAX pilot ARTF
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Tube support Ø 6mm (10 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Snap long M2 (10 uds)
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Covered closure or fairings
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	MZ-12, 6 Channel HoTT
1 x	Motor KAVAN PRO 2225-1600
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x	Spinner Alumin. fixed propeller 30 mm / 3,0 mm
2 x	Spinner NUT M6
1 x	Distanzstück motor OS 120 AX
1 x	Mobile Terminal
1 x	Transmitter GRAUPNER MZ-24 Pro
1 x	Cable set PREMIUM, fuselage/wing
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	MZ-18, 9 Channel HoTT
1 x	Receiver replacement antenna, approx. 85
1 x	Hose clips 6 mm
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	ProgBOX MASTER Hacker
1 x	MZ-10, 5 Channel HoTT
1 x	Spinner NUT M4
1 x	Kontronik ProgUnit
1 x	Spinner NUT 1/4x28
1 x	Small pinned hinge (6 uds)
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Large flex hinge (12 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	80 mm rods set for direction control
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Control for forward wheel (MINI)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Allen wheel collar M3x5
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Interface Jack Adapter IKARUS
1 x	IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Fiberglass tube 6/4x1000mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Hovercraft sailcloth
1 x	V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Tren electrico JP ER-005-V2 Mini AVANTI (Sebart)
1 x	ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A
1 x	Propeller G-Sonic 20x8
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Cockpit aluminium closing 5.4g
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Spinner NUT M5
1 x	ESC YGE 120 LVK
1 x	Tren electrico JP ER200 F-16 1:6 TOPRC
1 x	TMM 2512-3S heli

6,680.27EUR