430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Motor DLE 430 cc - Paramotors
1 x Motor DLE 200cc Premium Muffler
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Small Crow DLE-170M
1 x Big Crow DLE-170M
1 x 
1 x Servo NARO Max Std
1 x Aramid 50 daN 50 m
1 x MAX pilot ARTF
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Strip ABS 2.0x8.0x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
3 x Silent-blocks DLE 170M
2 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 400 mm (2 pcs)
1 x Tape GFK 50 mm
1 x Marker ties (20 pcs)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x BALSA trip 4.0x4.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Spikes Band (5 m)
1 x Beech dowels 2.0 x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
2 x 20x1000 mm Ring Strap Back To Back
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x 6 mm blue aluminium threaded horn with patella
1 x 1/12 Pilot "Fighter"
1 x Starter Sullivan-STAR 601
1 x Spray EC Red 400ml
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x 500 ml sealer (DOPE)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Copier 5x20 cm pcs
1 x Optical RPM Sensor
1 x Digital scale up to 40 kg
1 x Hexagonal ball head 2.0 x 50 mm
1 x Canopy Latch
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Motor DLE 200cc Std
2 x ESC ALPHA 60A HV
1 x TX 250 mW especial GOPRO
1 x Cable video GoPro and 5V cable
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x Silicone red 1,0 qmm wire (100 m)
2 x XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Silicone black 6,0 qmm wire (25 m)
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell
1 x Yellow silicone 0,5 qmm wire (50 m)
1 x Silicone red 1,0 qmm wire ( 1 m)
1 x TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x LOWER TOW HOOK
1 x Nylon gear block Ø 6 mm (2 uds)
1 x Landing gear strap medium (4 uds)
1 x Body for landing gear Ø 3 mm
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Power supply NT 40 Amp.
1 x Nylon gear block Ø 5 mm (2 uds)
1 x Quick hose connector 4-4 mm
1 x Nylon gear block Ø 3 mm (2 uds)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Silicone red 6,0 qmm wire ( 1 m)
1 x Silicone red 0,75 qmm wire ( 25 m)
2 x White silicone 0,25 mm² wire (25 m)
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x Straightened rod Ø 3.0 mm x 1000 mm
2 x TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo
2 x ASH 31 Mi Scale:1/3 - 7m
1 x SERVO HOLDER
1 x ASH 31 Mi Scale:1/3 - 7m, elevator
1 x Boomerang SPRINT V2 Red/White/Blue
1 x TURBINATOR 2 RED/WHITE 1778 mm Combo
1 x RANGER Jet NAVY 1.854mm combo
1 x 460 mm EPP Floats
2 x Boomerang ELAN THUNDERBIRD Combo
1 x Boomerang SPRINT V2 Red/Yellow
1 x Quick hose connector 3-3 mm
1 x Festo 4mm Tubing Holder (10 uds)
1 x Nylon threaded block M6 (2 uds)
1 x Dual Sequencer Gear and Canopy
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Landing gear clamp for Ø 2 mm (4 uds)
1 x Festo 6mm Tubing Holder (10 uds)
1 x Aero shocks
2 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x 40 mm air cylinder
1 x Festo Adaptor Tygon Large/4mm
1 x Air pressure gauge
1 x Angled clevis with threaded rod M3
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Check valve quick hose connector 4-4 mm
1 x eFuel 30A Power Supply
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Landing gear strap large (4 uds)
1 x HITEC Power Supply 30A. Max. 540w
1 x Servo MKS 6100 DS
1 x 20-25mm Servo Arm
1 x 10-15mm Servo Arm
1 x Pilatus PC-21 50E RED/WHITE (SebArt)
1 x ZEUS F3A 2m
1 x Servos wing assembly set HS 80/81/82/85
1 x Horns set HS-65HB/MG, 5065MG
1 x Servos security connector (2 pcs)
1 x CC 11 Conector
1 x Fast attachment for servos (25 pcs)
1 x Metal gear set for HS85MG/5085MG
1 x MIG 29 3D RTF, Servo
1 x Oratex Red Fokker 10 m
1 x Banna gold connector 2,5 mm (M/F)
1 x XH male balance (3S) connector (2 pcs)
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x SkyMaxx 1.550 mm (kit)
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x Spare Part Frame Set for EACHINE RACER 250
1 x Monokote ROJO misil (1.8x0.65m)
1 x Oracover White 10 m
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Conector Servo female 4 pines
1 x Connectors DEANS (T)
1 x Conector BEC male (10 pcs)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Servo arms set HS-65HB/MG/5065MG
1 x Plastic fan 17x48 mm (2 pcs)
1 x Colador RABBIT
1 x Polyurethan FESTO hose 3x0,5 mm, transparent
1 x 50m servo "Premium" wire (white/red/blue)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x PBS TJ 40-G2 Turbine
1 x Futaba 17 mm servo arm with ball link HITEC
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x Gear for D 54
64,462.46EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies