1,700.00EUR

Bidule 170 ARF 3.48 m
[TM066170]

Bidule 170 ARF 3.48 m

Wing Spam: 3480 mm
Lenght: 2740 mm
Wheight aprox.: 21 kg
Motor: 120/170 cc
Ailerons, Flaps, Rudder, Elevator, Motor, Towwing hook.
11 Servos.
Content of the set

QUICK BUILD KIT SERIES (only 15-20h construction build!)
All built-up plywood and balsa fuselage, covered with Oracover®, with graphics and decals. Pocket for wing joiner installed - Geometry of the airframe already made at the factory. All the blind nuts for landing gear, wings, tail already in place. Painted fiberglass engine cowl.
Painted and tinted PVC canopy, ready to be installed. The canopy frame is made in balsa and comes pre-covered, with its canopy fixings pre-installed. Painted fiberglass main landing gear.
Special front dampened and Steerable-Nose gear, complete with special steering wheel linkage with "Servo-saver".
All-built-up wings (2 parts), covered in Oracover®, ready with graphics. Ailerons and flaps articulated with pin hinges (to be glued). Servo wells prepared.
Carbon tube wing joiner.
All-built-up horizontal and vertical stabiliser covered in Oracover®, with graphics pre-fitted. Elevator and rudder articulated with pin hinges (to be glued).
Hardware (2x1,5l gas tank, 3 wheels, towing hook, metal control horns, wheel axis, pushrods, clevises, screws, etc.).
Detailed step by step illustrated building manual.

under request

Reviews

Customers who bought this product also purchased

Parachute BACKUP X100 under request	AXI 4120/14 V2 under request	Propeller Pleg CAM Carbon 12x8 under request
entral piece 3Bl 42 mm 0º under request	Spinner 3BL propeller pleg. 42 mm / 6,0 mm under request	Turbine CHEETAH 160 SE under request

Quick Find

Shopping Cart

1 x	Xplorer4 anemometro
2 x	Xplorer2 anemometro
2 x	Xplorer3 anemometro
1 x	Towing hook
1 x	LOWER TOW HOOK
3 x	Fixed launching hook
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	CC 03
1 x	CC 05
1 x	Motor DLE 430 cc - Paramotors
1 x	Big Crow DLE-170M
1 x	JETImodel SINGLE BEC
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Motor DLE 200cc Premium Muffler
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Silent-blocks DLE 170M
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
2 x	USB HLS prog. interface
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	4 LiPo XH>EH adapter
1 x	3 LiPo XH>EH adapter
1 x	Cabel charger transmitter GRAUPNER
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Circlick securite
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	CC 01
1 x	2 LiPo XH>EH adapter
1 x	BEC 3A FOXY
1 x	MPX-Dean "T" Adapter
1 x	Dean "T" - Futaba Adapter
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Small Crow DLE-170M
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	20x1000 mm Ring Strap Back To Back
1 x	Spikes Band (5 m)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Tape GFK 25 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring 350 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	SE Ring 250 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Tape GFK 50 mm
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	RF9 Flight Simulator with Spektrum Controller
1 x
1 x	Towing hook
2 x	SERVO HOLDER
1 x	Xplorer1 anemometro
1 x	Small pinned hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	25 mm reinforced hinge
1 x	Long pinned hinge (6 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Spray EC Red 400ml
1 x	Release wax 250ml
1 x	500 ml sealer (DOPE)
1 x	Universal Colour Paste deep black 250 g
1 x
1 x	Female connector for 12 pines AWG
1 x	Male connector for 20 pines AWG
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	EWC3 100 cm wing connector
1 x	Extension 2/3 lipos JST - JST/C
1 x	USB interface ALTIS
1 x	SE Ring 200 mm (2 pcs)
1 x	Male connector for 6 pines AWG
1 x	Female connector for 6 pines AWG
1 x	Tape GFK 38 mm
1 x	30 mm Alu spinner 3 mm pleg. propeller
1 x	50x45 mm micro-mini servo cover
1 x	BULLIT Wing 1095 mm
1 x	65 mm mini servo cover
1 x	Hobbylite Filler, Balsa colour
1 x	Spray Graphit 33
1 x	Robart Door Hinge (Pk2)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	MAX BEC
1 x	DPSI Ampere battery backer
1 x	Electronic switch JETI SP06 Opto
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Cabling for Fox MDM1 wings
1 x	SBEC 40
1 x	PowerBox SparkSwitch RS
1 x	Ring 320 mm length (5 pcs)
1 x	Avia spare blue cockpit (Top Model)
1 x	90x75 mm standart servo cover
1 x	Angle of incidence meter
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	90x60 mm standart servo cover

11,283.53EUR