1,150.00EUR

Bidule 111 3000 mm
[TM066111]


•The tricycle landing gear (which is particularly robust) was specially developed for this new aircraft. The nose wheel being fully dampened with an extra large track between the front and main Fiberglass gear, reducing “nose pitching” during both take-off and landing phases.
•The ground clearance with a two-bladed 26 "diameter prop is increased to about 4.0".
•The engine is mounted flat on a hyper strong aviation quality plywood firewall, with the mounting configured to allow the installation of tuned pipes to fit perfectly under the fuselage.
•For aesthetics, a fibreglass engine cowl (supplied painted) surrounds the engine without sacrificing cooling, essential for this kind of plane.
• A tinted PVC canopy mounted on its frame disassembles easily, thus allowing easy access inside the entire fuselage from the firewall to the towing hook (supplied in the kit). Excellent for easy maintenance!
•The two- parts wings (carbon wing joiner) are equipped with ailerons and powerful landing flaps to enable quick and accurate landing even from “tight” fields.
•The 2.5° of wing dihedral (per wing) assure that the Bidule keeps a straight and consistent tracking and is easily controllability in turns.
•The tail is removable, the two rudder servos are integrated into the thickness of the airfoil and are accessible via two hatches.
•The two vertical stabilisers (fins) are also removable via 4 screws (with captive nuts fitted into the horizontal stabiliser).
•Thanks to the lightness of the airframe, the Bidule 111 can be powered with engines from 60cc, however for those who practice towing the powerful DLE-111 is highly recommended
•As mentioned previously, although the Bidule was originally designed as a professional towing machine, as a recreational aircraft, its ability to perform soft and sweet aerobatics really take some beating.
• In addition it’s light wing loading, large and powerful flaps, rugged landing gear and its twin rudder configuration allow this aircraft to be used from rough short-strips even in strong crosswinds.

So what has changed?
• A new fibreglass engine cowling has been fitted which improves aerodynamics and gives a sleeker nose profile.
• A new front air shock / dampened landing gear is provided which improves ground handling on rough strips.
• A new fibreglass moulded main landing gear is provided which once again improves grounding handling on rough strips and exhibits very good “anti-bounce” properties on landing.
• All-built-up wings (2 parts), covered in Oracover®, ready with graphics. Ailerons and flaps articulated with pin hinges (to be glued). Servo wells prepared. Carbon tube wing joiner.
• All-built-up horizontal and vertical stabiliser covered in Oracover®, with graphics pre-fitted. Elevator and rudder articulated with pin hinges (to be glued).
• Hardware (1,5l tank, towing hook, metal control horns, wheel axis, pushrods, clevises, screws, etc.).
• Detailed step by step illustrated building manual.


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Ball link M3 (10 pcs, flat ball)
1 x M3 Maxi ball link (2 uds)
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Ball link M2 (10 pcs)
1 x Long ball link M3 (6 uds)
3 x Ball link M1.6 (6 uds)
3 x M2,5 5Diam metal ball link V3 (2 pcs)
3 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Joint with bearing M2,5 22x5,5
1 x Ball link M3 RPA's-UAV's
2 x M3/5 Diam metal short ball link V3 (2 pcs)
3 x Ball link M3 (10 pcs)
2 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x M3 Maxi ball link (2 uds)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
3 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
3 x Blue metalic ball link M2/2 azul (2 pcs)
1 x M2,5 5Diam black ball link V2 (2 pcs)
2 x M2 5Diam short black ball link V2 (2 pcs)
2 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
2 x Joint with bearing M3 22x5,5
3 x Joint with bearing M2 22x5,5
3 x Long ball link M2 (6 uds)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x M3/5Diam metal ball link V3 (2 pcs)
2 x Short ball link M3 (6 uds)
3 x Ball link M2,5 (10 pcs)
2 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Socket head long ball link M3 (2 uds)
1 x Socket head long ball link M3 (6 uds)
2 x Ball link M3 (6 uds)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
2 x Socket head ball link M3 (2 uds)
1 x Motor DLE 200cc Premium Muffler
1 x Digital scale up to 40 kg
1 x Screwdriver for Hexagon 1,27mm
1 x Vacuum pump 12 CFM
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x 2,0x50 mm allen screwdriver
1 x Hexagonal ball head 2.0 x 50 mm
1 x Z Bender - S Type Tool
1 x Vacuum pump P1-N
2 x Hot Glue Stick GREEN
1 x Cut tube
1 x 2,5x60 mm allen screwdriver
1 x 3,0x60 mm allen screwdriver
1 x EasyFLY Addon
3 x RF9 Flight Simulator with Spektrum Controller
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x Z type of cable coupler Ø 1.8 (2 uds)
2 x SIMtransmitter 6 Mode 2
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Angled clevis with threaded rod M3
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x GameCommander USB Universal
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Threaded coupler M2 (10 uds)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Interface Realflight Simulator
2 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Couple M4 for wire (10 pcs)
1 x BALSA trip 3.0x5.0x1000 mm
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Spikes Band (5 m)
1 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x Locking cable tie 4.6x203 (uds)
1 x Actuador lineal HLS12-100210-7.4v
1 x 2 mm Prop Adapter M5
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Servo HITEC D85 MG
1 x Piñones SAVOX SH-0350
1 x Futaba 52 mm servo arm
1 x HITEC 20 mm servo arm with ball link
1 x Futaba 30 mm servo arm with M3 ball link
1 x Dust collector for mould cleaning
2 x Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x AC-10 pre-rotacion with motor
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Futaba 2x20 mm servo double arm
1 x Red aluminium servo arm V3-Futaba 1,25inch M3
1 x Long ball link M1.6 (6 uds)
3 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x Futaba 38 mm servo arm with ball link
1 x Gates hinge
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Servo Robbe FS 525 BB MG HV
1 x SAVOX SH 1290 MG servo digi
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Red aluminium servo arm V1-Futaba 1,25" inch M3
2 x Soporte servo KST X10 mini / DS135MG
1 x Servo TOPMODEL DS1413 T
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Baseplate servo
2 x Red aluminium servo arm V3-Futaba 1,0inch
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
2 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x Xplorer2 anemometro
1 x "L" servo arm 65x49 mm (2 pcs)
1 x Futaba 76/92 mm servo pull-pull double arm with ball link
2 x Servo HITEC HS-311
1 x Hitec 38 mm servo arm with ball link
1 x Servo SAVOX SV-1261 MG
1 x Servo HITEC D645 MW
1 x 57 mm micro-mini servo cover
1 x Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x Futaba 30 mm servo rounded arm
1 x Servo KST X08 Plus 9g HV servo
1 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
1 x Gear set HITEC HS-311/322/325BB
2 x Rudder 2_Tray 3~3.5 inch
2 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Servo HITEC HS-225 BB
1 x Gear set HITEC HS-645MG/5645MG/5685MH
1 x Servo TOPMODEL S7520 MG
1 x Red aluminium servo arm V3-Futaba 3-3,5inch
1 x Servo SAVOX SB-2290 SG
1 x Oil FUCHS 1 liter
1 x Gear set HITEC HS-7950TH
1 x Horizontal mounting servo holder
1 x Servo FUTABA SBL 471 SV
1 x Servo FUTABA S 9670 SV
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
2 x Futaba S9650/9670SV - Upper Case
1 x 50 mm servo arm with bearing (2 pcs)
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x Servo FUTABA BLS 276SV
1 x Horns set HS-65HB/MG, 5065MG
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x Kwik link unmount tool
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Schul-Malpinsel Gr.5
1 x Universal Filter
1 x Fresa corte diamante Ø 2.7mm (bola)
1 x AXI 2204 Multicopter
1 x 800TVL CMOS camera for FPV
1 x T-Motor U7-V2.0 Kv420
1 x Combo 4 pcs AXI 2204 Multicopter
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Porta Kwik link M4 4 mm (2 pcs)
2 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Round Rod 1.0x3.5 cm
1 x Ball link Aluminio M3 (2 pcs)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x aluminium servo arm V2-JR 2,0 inch M3
1 x Servo SAVOX SH 0257 MG
1 x 45x19 mm hard foam KOVO wheel (2 pcs)
1 x Aluminum Fold Prop Spinner 30 mm / 5.0 mm
1 x Red aluminium servo arm V2-Futaba 1,25" inch M3
1 x Servo mounting frame SV-1260MG
1 x Aluminum Fold Prop Spinner 38 mm / 5 mm
1 x Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm
1 x Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm
1 x Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm
1 x Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
2 x Turbo light spinner cap white 32mm
1 x Suncover 100cc Red
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Servo DITEX TD2612S
1 x A/C quality beech plywood 600x300x5.0 mm
1 x 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
1 x 89x25 mm (3.50") Type jets aluminium core wheel
1 x 51 mm aluminium spinner.
1 x SAVOX SH 0254 servo
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x Servo SAVOX SA-1256 TG
1 x 63x12 mm foam special light KOVO wheel with radius (2 pcs)
1 x A/C quality beech plywood 600x300x6.0 mm
1 x 51 mm INO spinner (carbon imitation)
1 x Servo DITEX EL0510M
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x 76x24 mm (3.0") Type jets aluminium core wheel
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Servo HITEC D-955 TW Titanium
1 x Servo HITEC HS-5245 MG Digi
1 x 20-25mm Servo Arm
1 x Heli digital angle measurer
1 x Servo FUTABA S 3071 HV S-Bus
1 x SkyMaxx 1.550 mm (kit)
1 x Servo HITEC HS-5585MH
1 x Servo case HS-225MG/225BB/5245MG
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x Servo HITEC HS-45 HB
1 x Servo lock HS-80/81/82/85 (2 pcs)
1 x Servo Mount M (blue)
1 x Servo Mount S (red)
1 x Servo Bolt M3x8 (8 pcs)
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x Rudder 2_Tray 3.5~4 inch
1 x Servo KST X20-7512 V8.0 82kg 8.4v
2 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
2 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Soporte servo KST X08/H and Plus
1 x 13 mm wing servo holder
1 x Mini Lock Grips 2PCS
1 x STANDOFF GAS ENGINE MOUNT 38 mm
1 x Dremel PERMAGRIT thin lime
1 x Propadapter for motor A50-V3
1 x Crimping tool
1 x Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x Extractor piñones 2.3/3.2 mm
1 x Frontal Adapter for AXI53xx
1 x Turnbuckle M2x29/43 (2pcs)
1 x Propeller MEJLIK 23x8 CFK
1 x Propeller MEJLIK 18x8 CFK
1 x Spinner 100 mm CFK
1 x APM2.6 Power module with 5.3V DC BEC
1 x Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x Reed valve for DA 50-R
1 x Cross Connector 4.0 mm x 1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Rudder 107-06
1 x 3,9 mm ZG20-ZG38 servo arm
1 x ARTIST 1.560 mm
1 x Spare round blades, 28 mm, pack/ 2 pcs.
1 x PROXXON - SAW BLADE 8MM 0ZI220E
1 x Rubber Insert soft, 1 Pcs.
1 x Ball Link Plier
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Bidule 170 ARF 3.48 m
1 x Screwdriver for Torx® TX8
1 x MPX 8 pins plug mold
1 x Propeller diller for DA50, DLE55 red
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x Laminating brush 10 mm, pack/ 50 pcs
1 x XT-60 Plug Mold
1 x Ball Link Plier
1 x FesEx-Uni8 System
1 x Tool for entel
1 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x USB Mini Camera endoscope
1 x Silent-blocks DLE 170M
1 x Electric spoiler 250 mm (2 pcs)
14,876.50EUR
Manufacturers
Manufacturer Info
Top Model
Top Model Homepage
Other products
Languages
Español English
Currencies