Top » Catalog » Kavan » KAV201280MG

99.90EUR

Servo GO-1280 MG 40 kg.cm 0.085s/60º
[KAV201280MG]


Very high torque/high speed programmable digital standard 79g brushless servo with hardened steel gear and triple BB-ed output shaft. Works great in 1:8 or 1:10 off-road RC cars etc. All-aluminium waterproof and dustproof case (meeting IP67 standard requirements) for perfect cooling under high load and protection from the rough environment. The magnetic encoder instead of the regular mechanical potentiometer adds to the uncompromised precision and reliability.

GO-1280MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
Reverse: Reverses the servo movement direction. Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio. SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo. Wide input voltage range 4.8-7.4 V (nominal).
25T/5.92 mm output shaft.

Servo dimensions Standard
Servo type Digital
Programmable Yes
Magnetic system Yes
Thrust at 4.8V [kg/cm] 27
Thrust at 6.0V [kg/cm] 31
Thrust at 7.4V [kg/cm] 36
Thrust at 8.4V [kg/cm] 40
Speed at 4.8V [s/60st.] 0.14
Speed at 6.0V [s/60st.] 0.12
Speed at 7.4V [s/60st.] 0.1
Speed at 8.4V [s/60st.] 0.085
Servo gears Metal
Ball bearings 3×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 40
Width [mm] 20
Height [mm] 37.5
Weight [g] 79
Intended for On-road cars,Off-road cars,Boats
Water resistance Waterproof


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
28x12 BIELA propeller (3-blades)
28x12 BIELA propeller (3-blades)
145.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x PIX Hawk with accesories
2 x PPM Encoder Module
1 x Xplorer2 anemometro
1 x Towing hook
1 x SERVO HOLDER
2 x Towing hook <3m
3 x Adjustable launching hook
1 x Towing hook
1 x Cap Hispano Aviación
1 x LOWER TOW HOOK
1 x Shirt Hispano Aviación
1 x Nitroverdu 500 ml
1 x Partall paste 650 g
2 x Spray Graphit 33
1 x Universal Colour Paste deep black 250 g
1 x Presto SF Light Filler styrene-free (420 g)
2 x Universal Colour Paste deep black 50 g
1 x Plasti Dip Liquid Tape 429 ml black
1 x Hobbylite Filler, Balsa colour
1 x Spannlack 1000 ml
1 x 1000 ml sealer (DOPE)
1 x Painting GHT Lexan Black 150 ml
2 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Spray YELLOW Inca Lexan 150ml
1 x Spray EC Red 400ml
2 x 
2 x 500 ml sealer (DOPE)
2 x PARTALL® Hi-Temp Wax, 340 g
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Quicklock washer 1 mm (10 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Copier 5x20 cm pcs
1 x U Profile ABS 5,0x10,0x1000 mm
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x Clip mini fixing for wing (2 pcs)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Ring 320 mm length (5 pcs)
2 x ABS tube 10.0x8.0x1000 mm
1 x Softshell Hispano Aviación
2 x GPS Altis
1 x Suncover 100cc Red
1 x EASYGLIDER 4 RR
1 x FOX 2.300 mm V2 PNP (FMS)
1 x Avia spare fouselage CF reinforced (Top Model)
1 x Aero-Master Fuselage (Aero-naut)
1 x Fascination 3600 mm (Top Model)
1 x Ion Pro NG electric with flaps ORANGE (JP Model)
1 x Astra wing Joinner (Top Model)
1 x FUNRAY RR
1 x Carbon plate 350x150x3.0 mm
1 x Avia (Top Model)
1 x Aero-Master Wings (Aero-naut)
1 x Fascination 3600 mm, Spare Wings (Top Model)
1 x Fascination 3600 mm, Spare Elevator (Top Model)
1 x Socket Screw M2x3 mm (4 pcs)
1 x Floating M3 washer pad (36 pcs)
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Tornillo cabeza boton M4x12 mm (5 pcs)
1 x Screw KB 1.4x6 mm (10 pcs)
1 x Screw M3x30 (10 pcs)
1 x Pan Head Screw M1,6x6 (10 pcs)
1 x Tapping Screw M2.2x13 (10 pcs)
1 x Socket Head Screw M2x12
1 x Screw M3x12 (10 pcs)
1 x Socket Head Screw M2,5x12
1 x Spring pin Ø 2 x 6 mm (10 pcs)
1 x 1/6 Pilot "Tony"
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
2 x ABS tube 2.0x1.0x1000 mm
2 x ABS tube 3.0x2.0x1000 mm
2 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
2 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
1 x Tow hook for tug
2 x Plasti Dip Liquid Tape 429 ml black
1 x 20 g tin paste
2 x Release wax 250ml
2 x Charger SKY RC e680
1 x Birch plywood plate 600x300x1.5 mm
1 x Dummy motor GPW Wasp Scale 1/4
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x Rudder 2_Tray 4~4.5 inch
1 x Secraft Fuel system v2, red color
1 x Ciano KAVAN Thick 20g
2 x Blade holder metal LAMA
1 x BETA 1400 RTF Red
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Ciano KAVAN Super Thin 20g
1 x 10 mm aluminium spinner (Kavan)
1 x 45 mm aluminium spinner (Kavan)
1 x Concave-Convex sandpaper file 13 mm
1 x Debonder CA 20g
1 x Ciano KAVAN Thin 20g
1 x Conector MR-60 (pareja)
1 x Crawler GRE-24 RTR 1:24 Arena
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x BETA 1400 ARF Red
1 x Cable coupler M3 (10 uds)
1 x Conector MT-60 (pair)
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x Birch plywood plate 600x300x2.5 mm
1 x 60 mm aluminium spinner (Kavan)
1 x Ciano KAVAN Medium 20g
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Spinner 82mm Black ventilado
2 x Falcon Carbon Spinner 82mm for electric motor
2 x F3A carbon 85 mm spinner for AXI
1 x F3A carbon 82 mm spinner for 12 mm axis
1 x 51 mm INO spinner (carbon imitation)
2 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x 57 mm INO spinner (carbon imitation)
1 x F3A carbon 80 mm spinner for Spark EVO
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x Receiver bed (Blue)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Blue aluminium servo arm V1-Hitec 1,0" inch M2
2 x Keypad ALTIS V4
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Telemetry interface ALTIS to Futaba
2 x Telemetry interface ALTIS 6 cm
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x FELIX SportJet Blue 2200 mm
1 x MB339 CAMUFLAGE PNP 1790 mm
1 x PC-21 2.880 mm BLUE French Army Scheme
1 x PC-21 2880 mm Electric Landing Gear
1 x MIRAGE 2000 Camuflage PNP
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x 2,3 mm Prop Adapter M5
1 x ABS tube 6.0x4.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x Altimeter Altis NAO
1 x Telemetry interface ALTIS 12 cm
1 x Device Terminal
1 x Altimeter Altis V4
1 x BD-5 Pro ARF
1 x Set stickers JEEMO "Andy"
1 x Harness for transmitter JETI DUPLEX
1 x Allen wheel collar M3x5
1 x 6 mm Prop Adapter M8
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x 3,2 mm Prop Adapter M5
1 x Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x Adapter 3,2 mm M8
1 x 12 mm dogdrive props
1 x Allen wheel collar M3x3
1 x 2 mm Prop Adapter M5
1 x 3 mm Long Prop Adapter M5
1 x Adapter 5,0 mm M8
1 x 10 mm dogdrive props
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x ABS tube 18.0x16.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x ABS tube 4.0x3.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x ABS tube 8.0x6.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x ABS tube 9.0x7.0x1000 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x ABS tube 3.0x2.0x330 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x ABS tube 16.0x14.0x1000 mm
1 x Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
2 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x ABS tube 7.0x6.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Fiberglass tube 6/4x1000mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x ABS tube 5.0x3.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Vest clothes Hispano Aviación
1 x Starter EM Gear Power 250
1 x Esc KOSMIK 160 HV
1 x JIVE 100+LV Esc
1 x Program Card KAVAN ES
1 x LiPo KAVAN 3700 mAh 14.8v 40/80C
1 x 57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x 70 mm INO spinner (carbon imitation)
1 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x 4 mm Prop Adapter M6
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Superlight deluxe wheel 40 mm (2 pcs)
1 x 
1 x Epoxy 5min KAVAN 2x 100g
1 x F3A carbon 95 mm spinner
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x 89 mm INO spinner (carbon imitation)
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x Spinner plastic white fixed propeller 51 mm
1 x KOBY 40 LV Esc
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Glow starter with charger 230v
1 x 25 mm Sandpaper file
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Turbina KINGTECH K260 G5
1 x Pin hinge 26x11 mm (10 uds)
1 x ESC KAVAN PRO-160HV Opto 160 Amp
1 x Electric Fuel Pump 12v
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Ball Bearing Oil 25 ml
1 x SKY RC T400Q Charger 4x100w
1 x Threaded coupler M2 (10 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Kavan Car 25% nitro 1l
1 x Fast'n EZ-CA-Hinge (12 uds)
25,787.14EUR
Manufacturers
Manufacturer Info
Kavan
- Other products
Notifications
NotificationsNotify me of updates to Servo GO-1280 MG 40 kg.cm 0.085s/60º
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce