120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

1 x	Conector JR Servo male (10 pcs)
1 x	30 cm MULTIPLEX female connector
3 x	Conector Servo female 4 pines
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Conector XT-30 (macho)
1 x	Conector JR Servo male (10 pcs)
2 x	Connectors banna oro 4 mm (M/F) (ultralight)
2 x	Conector MT-60 (pair)
1 x	2 mm male connector (2 pcs) with safety connector
2 x	Conector JR Servo female (10 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
2 x	Banna gold connector 2,5 mm (M/F)
1 x	Conector JR Servo female (50 pcs)
1 x	Conector BEC male (10 pcs)
1 x	Conector FUTABA Servo female (10 pcs)
2 x	Connector CAN 15
1 x	Bag connector 2 mm
1 x	Cable coupler M2x66 (2 uds)
1 x	LUCAS pilot ARTF
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	White smoke canister 140 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Connectors MPX black female
1 x	Protector Connector MPX (1 pair)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Conector MR-60 (pareja)
1 x	XT60 Connector with Holder Male 2pcs
1 x	XT-60 connector (female)
1 x	Red 4 mm connector holder
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Soldering PCBs 8pin, 5 pieces
1 x	XH male balance (9S) connector (2 pcs)
1 x	Servo Connector Brackets (10 pcs)
1 x	Wing connector 8pin with pin strip, plug & socket
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Motor UMS Radial-7-35cc glow
1 x	Motor OS FS 75 AX
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Fiberglass plate 620x540x0,3 mm
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Fiberglass plate 620x540x2,0 mm
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Fiberglass plate 350x150x0.3 mm
1 x	Propeller APC 11x8.5 Electric
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Crystal Universal RX 35.150 Ch 75
1 x	MPX Sub-D Adaptor
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Connectors DEANS (T)
1 x	XH male balance (5S) connector (2 pcs)
1 x	OS Engine 105HZ-R Heli
1 x	Motor OS 81 FS 4T
1 x	Motor OS MAX 160 AX
1 x	Motor OS 46 AX II
1 x	Motor OS 55 AX
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Fiberglass plate 350x150x3.0 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Foam plastic plates (310x210x3 mm)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Fiberglass plate 620x540x3,2 mm
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 10m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x	Fiberglass plate 350x150x1.5 mm
2 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish
1 x	Pilot JAN 1/4 Saiplanes
1 x	Foam plastic plates (310x210x8 mm)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Fiberglass plate 620x540x1,0 mm
1 x	Film release agent PVA 25 ml
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Fiberglass 5000x1100 mm 49 g/m²
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Foam plastic plates (310x210x5 mm)
1 x	Foam plastic plates (310x210x2 mm)
1 x	Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Kardan Black (without pinions)
1 x	Rigid coupling brass Ø 3 mm L: 20 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller)
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller)
1 x	Spare Shaft Ø4mm L:450x23mm M4
1 x	Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x	270 mm 3/3 mm shaft ship
1 x	Rudder 107-06
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller)
1 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	Spare Shaft Ø6mm L:450mm M5
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller)
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x	Rigid coupling brass Ø 2 mm L: 15 mm
1 x	Spare Shaft Ø4mm L:450x18mm M4
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Rigid coupling brass Ø 5 mm L: 25 mm
1 x	290 mm M5 Prop shaft
1 x	Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller)
1 x	G-Ring Ø3mm Ø3xØ6x3 mm
1 x	Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller)
1 x	Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x	290x4 mm M4 shaft ship
1 x	Propeller APC 10x10 Electric
1 x	Propeller APC 12x6 Electric Pusher
1 x	Propeller APC 11x8 Electric
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	12x6 tree blades propeller
1 x	290 mm M4/4 mm Prop shaft
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Crystal Universal RX 35.170 Ch 77
1 x	Crystal TX 35.010 Ch 61
1 x	Crystal Universal RX 35.050 Ch 65
1 x	Crystal TX 35.180 Ch 78
2 x	45 mm aluminium spinner (Kavan)
2 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
2 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
2 x	Ciano KAVAN Super Thin 20g
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Ball Link M2 with Ball and Hardware, 10 pcs

10,086.60EUR