120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Horn 5/20 with M2 Bearing
1 x	Horn mando long (2 pcs)
1 x	Extra long horn 60x30
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn for flap control (1 pcs)
1 x	6 mm blue aluminium threaded horn with patella
2 x	6 mm red aluminium threaded horn with patella
1 x	Horn mando small (2 pcs)
1 x	Horn 5/10 with M2 Bearing
1 x	Control horn long w/ball
1 x	6 mm M3 variable horn
1 x	6 mm M3 variable inclined horn
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
2 x	6 mm aluminium horn with patella
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Adjustable brass horn threaded M3
1 x	5 mm M2 variable inclined horn
2 x	20 mm carbon horn
1 x	Horn 6/27 with M3 Bearing
1 x	Cable with accesories
1 x	Brass control horn M2 large for wire (2pcs)
1 x	5 mm M2 variable horn
1 x	Horn 6/20 with M3 Bearing
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Straightened rod Ø 0.5 mm x 1000 mm
3 x	Straightened rod Ø 0.8 mm x 1000 mm
3 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	Blue smoke canister 140 g
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Red smoke canister 140 g
1 x	Smoke set "Glider"
1 x	Blue smoke canister 100 g
1 x	PCARD Wireless System
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	3l Smoke oil
1 x	White smoke canister 65 g
1 x	White smoke canister 100 g
1 x	White smoke canister 140 g
1 x	Green smoke canister 100 g
2 x	Yellow smoke canister 65 g
1 x	Red smoke canister 100 g
1 x	AX-60 starters (5 pcs)
1 x	"S" set for planes
1 x	AX-60 starters (5 pcs)
2 x	Red smoke canister 65 g
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Smoke set "M"
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Ventral support for AX-18/AX-60
1 x	B4-0 rocket charges (6 pcs)
1 x	Civilian pilot "Curt" size 9cm (Slimline)
2 x	1/12 Pilot "Langley"
1 x	1/6 Pilot "Tony"
1 x	1/12 Pilot "Tom"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
2 x	1/12 Pilot "Cougar"
1 x	1/6 Pilot "John"
1 x	Pilot "Goose" (Slimline)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Pilot "Dick" Legends Series (Slimline)
2 x	1/6 Pilot "Garry"
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	1/4 Pilot "Heidi"
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	1/4 Pilot "Mike"
1 x	Piloto jet 130 mm
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
2 x	1/6 Pilot "Cindy"
3 x	Piloto JET 1:3,5
1 x	Balsa panel 8.0x100x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Tow hook for tug
1 x	Paint gun for sprays
1 x	Aluminium sheet 500x250x0,5mm
1 x	Conector XT-30 (hembra)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Green smoke canister 140 g
1 x	"M" set
1 x	80 mm rods set for direction control
1 x	Blades 330mm
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	120x60 mm SLH KOVO wheel
1 x	Straightened rod Ø 4.5 mm x 1000 mm
2 x	Straightened rod Ø 5.0 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Electric rocket starters (6 pcs)
1 x	Remote electric ignition system
2 x	1/7 Pilot "Japanese"
2 x	Pilot JAN 1/4 Saiplanes
1 x	Yellow smoke canister 100 g
1 x	Pilot "Anthony" (Slimline)
2 x	1/10 Pilot "Jack"
1 x	1/10 Pilot "Jimmy"
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	36 mm black plastic spinner for fixed propeller
1 x	Spinner NUT M10x1
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	VTX 477 Carbon Rotorblade
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	5 LiPo XH>EH adapter
1 x	30 cm BEC cable (male)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	LOGO 600 SX (kit)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Cabel charger transmitter GRAUPNER
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	VBar Control Touch, midnight black
1 x	4 LiPo XH>EH adapter
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Tail boom brace LOGO 480
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	2 LiPo XH>EH adapter
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Cabel "Y" 30 cm (graupner)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	45 mm black plastic spinner for fixed propeller
1 x	45 mm white plastic spinner for fixed propeller
1 x	36 mm white plastic spinner for fixed propeller
1 x	Spinner NUT 1/4x28
1 x	Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x	Spinner NUT M6
1 x	Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x	Spinner NUT M6
1 x	Spinner NUT M4
1 x	Spinner plastic white fixed propeller 42 mm
1 x	Spinner plastic red fixed propeller 30 mm
1 x	Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x	9x4.7 * 22x12 carbon propeller
1 x	Debonder CA 20g
1 x	BETA 1400 ARF Red
1 x	Blade holder metal LAMA
1 x	Initior Transmitter FTX2 Wireless
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	1/12 Pilot "Fighter"
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x

7,123.05EUR