25.00EUR

USB programador GO servos
[KAV20.0001]

USB programmer/interface for programming KAVAN GO digital servos of the GO-10xx/11xx/12xx series with the help of a convenient PC operating program for Windows XP, Vista, 7, 8, 10 (32/64bit).

USB interface - KAVAN GO-10xx/11xx/12xx series servo programmer. By using the computer monitor as a user interface, you have a programming and testing tool with comfortable operation. During programming the servo is powered from the USB port of the computer to which the programmer is connected. All parameters are first set in a window on the screen and then loaded into your servo. The operating program can be found in the "Downloads" section.
System requirements for using the programmer
Power supply: USB (5 V/500 mA)
Operating system: Windows® XP/Vista/7/8/10 (32/64bit)
USB port: USB 2.0
Compatible Servos: KAVAN GO-10xx/GO-11xx/GO-12xx series
Programmable functions

Servo angle: Used to set the maximum travel of the servo. Default setting is approx. 120° at normal control pulse width range (900~2100 µs); approx. 180° at maximum allowed control pulse width range (500~2500 µs).
Servo Neutral: Used to set the neutral (center) position of the servo.
Damping Factor: Sets the servo's stopping behavior characteristic.
PWM Power: Sets the output power of the servo. As higher the value is, the faster the servo is and the more thrust it has - of course, the current draw will be proportionally higher. Range: 39.2~100%
Sensitivity: Adjusts the sensitivity (insensitivity bandwidth) of the servo. The higher the value - the narrower the insensitivity bandwidth - the servo will only move if the change in control signal width is greater than the insensitivity bandwidth. Setting the sensitivity value too high can cause the servo to oscillate in some applications. Range: Ultra High (Extra High - sensitivity bandwidth approx. 1 µs) - High (High - approx. 2 µs) - Medium (Medium - approx. 3 µs) - Low (Low - approx. 4 µs) Soft start: Enables/disables the soft start function. This function prevents the servo from abruptly moving into the operating position after power is turned on, thus reducing the risk of damage to the servo gears.
Inversion: Reverses the sense of servo movement.
FUTABA SR mode: Used only with FUTABA RC system working in SR mode. Do not turn this option on if you are using a different FUTABA RC system setting or any other brand of RC system.
SANWA SSR mode: Used only with SANWA RC system working in SSR mode. Do not turn this option on if you are using a different SANWA RC system setting or any other brand of RC system.
Fail-safe: If the control signal from the receiver is completely lost or if the servo cannot detect the signal properly (e.g. due to interference), the servo may enter one of three fail-safe modes:
(a) Free: Fail-safe is disabled.
(b) Maintain Position: the servo maintains the position corresponding to the last correctly received signal.
(c) Transition to neutral: The servo returns to the neutral (1500 µs pulse width) position.
Overload protection: enables or disables servo overload protection in three levels - once the overload has lasted for a preset time (in seconds), the servo output power is limited to the corresponding preset value (in % of max power).
Reset: Restores the connected servo to its factory default settings.
The programmer kit includes: programmer GO servos, manual.

enought units

Reviews

Quick Find

Shopping Cart

1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler M2 (10 uds)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Couple M4 for wire (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x	BALSA trip 8.0x8.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
3 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	PIX Hawk with accesories
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Futaba Female 40 cm extension
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Oracover Green10 m
1 x	MG cannon 1.8 cm (5 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Surface Indicator Gauge Small
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Support conector MPX (6 pcs)
1 x	Rubber bushing with bracket "B" type (2 pcs)
1 x	Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Pine wood slat 3.0x10.0x1000 mm
2 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	BALSA triangular 6x6x1000 mm
1 x	DELPHIN Race 3.6m c64
1 x	IKURA GPS 4.28 m
1 x	BALSA leading edge 8x10x1000 mm
1 x	EASYGLIDER 4 RR
1 x	ENIGMA ARF
1 x	ASW 15 5000 mm (Airwold)
2 x	Carbon plate 350x150x3.0 mm
1 x	Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x	LO 100 ARC 3.3m
1 x	LO 100 ARC 3.3m,frame canopy
2 x	BLANIK 50 V2 Silver/Blue (SebArt)
1 x	Fox MDM 1 4000 mm Std.
1 x	Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x	FOX MDM-1 3.500 mm ARF White
1 x	LO 100 Scale 1:2 - Modellbau Bruckmann
1 x	LIBELLE Standard 3.8m D-box H-201
1 x	AXI 2204 Multicopter
1 x	ESC ALPHA 60A HV
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	XT60 Connector with Holder Male 2pcs
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Charger SKY RC e680
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Kavan Car 25% nitro 1l
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	Ø 0,5 mm Pull-Pull Kevlar Line (3 m)
2 x	Metal clevis M2 (10 uds)
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Porta Kwik link M4 3 mm (2 pcs)
1 x	Metal clevis M3 (10 uds)
2 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
2 x	Pulley brass 6/1,5 (2 pcs)
2 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
2 x	Pulley brass 5/1,5 (2 pcs)
2 x	Metal clevis M2,5 (10 uds)
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x	Porta Kwik link M3 3 mm (2 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x	Micro clevis (10 uds)
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Pulley brass 10/2 (2 pcs)
1 x	Metal ball clevis M3 (10 uds)
1 x	Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x	Porta Kwik link M4 4 mm (2 pcs)
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	Kwik link with arm M3xM2xL24
1 x	Pulley brass 12/2 (2 pcs)
1 x	Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
2 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Kwik link with arm M5xM2,5xL30
1 x	Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x	Round Rod 1.0x3.5 cm
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Pull-Pull complet set with CF rudder double servo arm
1 x	Quick hose connector 6-4 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Spikes Band (5 m)
1 x	Beech dowels 2.0 x 1000 mm
1 x	FESTO connector M7 Quick 6mm 90º
1 x	Racor "Y" 3 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	290 mm M5 Prop shaft
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	VIPER JET G2 Esq. 2 Red/White/Silver
1 x	X-RAY Micro QR
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	Propeller hub spacer 8/5.5
1 x	Decorative caps, multicoloured
1 x	MZ-18, 9 Channel HoTT
1 x	Distanzstück motor OS 120 AX
1 x	Propeller G-Sonic 20x8
1 x	Tap FESTO 6-6 mm
1 x	FESTO connector M7 barb fitting XL Tygon
1 x	Conector FESTO M3 Quick 3mm 90º
1 x	FESTO connector 1/8 Quick 6mm 90º
1 x	Y-Hose connector 6-6-6 mm
1 x	T-Hose connector 3-3-3 mm
1 x	Quick hose connector 4-3 mm
1 x	Racor 2/3 mm
1 x	Faucet FESTO
1 x	Festo Adaptor Tygon Large/4mm
1 x	Avanti S 1.8m Jet White/Blue
1 x	Avanti S 2.3m Jet YELLOW/BLACK (SebArt)
1 x	LUNAK 4,00 m
1 x	Elevator VENTUS 2cx 4.5m
1 x	Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x	Ventus 2cx 4.5 m
1 x	Swashplate metal LAMA
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	25 mm Sandpaper file
1 x	Servo GO-1053 MG 20.0kg
1 x	USB programador GO servos
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	290x4 mm M4 shaft ship
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	270 mm 3/3 mm shaft ship
1 x	ABS angle 6,0x6,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	X-RAY Micro QR (Rudder)
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Avanti XS Jet , Tricolore Canopy
1 x	Swift 5050 mm (Airwold)
1 x	SOLOFOX 5m Voll-GfK
1 x	Avanti S Jet , Exhaust for JetCat P-140 (SebArt)
1 x	SAGITA Alsema 4.0 m
1 x	BLANIK 50 V2 Silver/Orange (SebArt)
1 x	Electric Landing Gear AVANTIA XS
1 x	Ventus 2cx 4.5 m Cabling wings
1 x	Avanti S Jet, Kerosene+Smoke Tank(SebART)
1 x	Hose clips 6 mm
1 x	T-Hose connector 4-4-4mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Program card KAVAN PRO
1 x	SIG Coverall 1.2x0.9 m
1 x	Turbina KINGTECH K260 G4
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	SIG Coverall 1.2x4.5 m
1 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	Cable coupler M2 (10 uds)
1 x	Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x	Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x	Cable coupler M3 (10 uds)
1 x	Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x	Fully Threaded Steel Rod M3
1 x	Flybar support metal LAMA
1 x	T-shape holder metal LAMA
1 x	Valvula One way
1 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	Shaft sleeve LAMA
1 x	UBEC 6A KAVAN

40,815.43EUR