120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

1 x	Motor A2212/13T
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	DPS Switch JR/JR
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	12 mm floating pad (49 pcs)
1 x	10 mm floating pad (72 pcs)
1 x	1/4 Pilot "Heidi"
2 x	Dremel PERMAGRIT thin lime
1 x	5 LiPo XH>EH adapter
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	1/4 Pilot "Mike"
1 x	Dean "T" - Futaba Adapter
2 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
2 x	Dremel PERMAGRIT 18 mm round lime
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
3 x
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Extension 100 cm (Futaba)
1 x	Conector male bateria 1s Kavan/Walkera 10cm cable
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	3l Smoke oil
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Balsa panel 2.0x100x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Support ECU Xicoy X-45
1 x	Support XT60 conector (2 pcs)
1 x	Futaba Female 40 cm extension
1 x	Connectors banna oro 3 mm (M/F)
1 x	Support FUEL DOT V3
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Indoor hinge with servo arm integraded
1 x	Balsa panel 5.0x100x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Conector BEC female (10 pcs)
1 x	Balsa panel 10x100x1000 mm
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Smoke set "M"
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Balsa panel 1.5x100x1000 mm
1 x	Gates hinge
1 x	Bag connector 2 mm
1 x	Large flex hinge (12 uds)
1 x	38x4,5 mm wires output (2 pcs)
2 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Charger LiPo Charger4
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Clip mini fixing for wing (2 pcs)
2 x	Beech dowels 2.0 x 1000 mm
1 x	80 mm rods set for direction control
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Adjustable brass horn threaded M3
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Foam plastic plates (310x210x3 mm)
1 x	100 mm rods set for direction control
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	Piloto JET 1:3,5
1 x	1/6 Pilot "Garry"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Mudguard for 140/165 mm wheels
1 x	Vacuum pump 12 CFM
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Starter Sullivan-STAR 601
1 x	Starter EM Gear Power 250
1 x	Hot Glue Stick GREEN
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Xplorer1 anemometro
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	55% silver electrodes (2 pcs)
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Blind nut M6 (4 pcs)
1 x	Crimping tool
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	3,0x60 mm allen screwdriver
1 x	Dust collector for mould cleaning
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Kavan Car 25% nitro 1l
1 x	MB-339 Aermachi 84" ARF c/retractil electric
1 x	Pine wood slat 10x10x1000 mm
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	1/12 Pilot "Cougar"
1 x	1/6 Pilot "Tony"
1 x	1/12 Pilot "Langley"
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Crimping tool
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
2 x	Copier 2x20 cm pcs
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
2 x	Digital precision scale up to 2000 g
2 x
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x	1,5x50 mm allen screwdriver
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Vacuum pump P1-N
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Screwdriver for Hexagon 1,27mm
1 x	Hot Glue Stick BLACK
1 x	Digital scale up to 40 kg
1 x	Starter 12v (Max 90 and 15ccm)
2 x	Disposable Injector Bags (30x16cm) 100 pcs
2 x	Ball Link Plier
1 x	Z Bender - S Type Tool
1 x	Z Bender - S Type Tool
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
2 x	Copier 5x20 cm pcs
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Hot Glue Stick RED
1 x	Fiberglass tube 6/4x1000mm
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Screwdriver for Torx® TX8
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Blind nut M4 (10 pcs)
1 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	UHU hart 35 g
1 x	2,5x60 mm allen screwdriver
1 x	UHU Por 50ml/40g
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Xplorer3 anemometro
1 x	Ball Link Plier
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Pegamento Pu R 50g polyuretano
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Xplorer4 anemometro
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Concave-Convex sandpaper file 13 mm
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	Digital weight, angle and balance meter BASIC
1 x	15 mm floating pad (30 pcs)
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Blind nut M4 (4 pcs)
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Blind nut M5 (10 pcs)
1 x	Dremel 3000 130W
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Ventus 1:4 set of instruments
1 x	PIX Hawk with accesories
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Tube Pitot to PIXHAWK
1 x	PPM Encoder Module
1 x	Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x	Fuel bottle 500 ccm
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Ciano KAVAN Thick 20g
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Plastic caps for AIR BURTS (30 pcs)

8,776.02EUR