120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Conector banana oro 8,0 mm
2 x	Conector BEC hembra (10 pcs)
1 x	Conector DEANS (T)
1 x	Conector banana oro 0,8 mm
1 x	Conector banana oro 4 mm (Ultralight)
1 x	Conector Servo hembra 4 pines
1 x	Conector banana oro 2 mm
1 x	Conector banana oro 2,5 mm (100 parejas)
1 x	Conector banana oro 4 mm
1 x	Conector FUTABA Servo macho BLUE silicon (10 pcs)
1 x	Conector JR/Uni Servo macho BLUE silicon (10 pcs)
2 x	Conector JR/Uni Servo hembra BLUE silicon (10 pcs)
1 x	Conector banana oro 2 mm (Ultralight)
1 x	Conector banana oro 3 mm
1 x	Conector FUTABA Servo hembra BLUE silicon (10 pcs)
1 x	Conector DEANS 4 pines (1 par)
1 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Conector micro DEANS (T)
1 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Conector MULTIPLEX hembra 30 cm
1 x	Conector banana oro 6,0 mm Ultralight (pareja)
1 x	Conector FUTABA Servo hembra (10 pcs)
1 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Conector JR Servo macho (10 pcs)
1 x	Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x	Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x	CC 05
1 x	Tubo acero (L 1000 mm, Ø5 mm, Ø4,7 mm)
2 x	Adaptador Dean "T" - Futaba
2 x	Tubo acero (L 1000 mm, Ø12 mm, Ø11,7 mm)
2 x	Tubo aluminio (L 1000 mm, Ø5,0 mm, Ø4,1 mm)
1 x	Tubo ABS 3,0x1,0x1000 mm
1 x	Set de tubos de carbono (Ø38 mm y Ø14 mm)
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	Adaptador USB para elementos Jeti DUPLEX
1 x	Adaptador 3 LiPos XH>EH
1 x	Tubo ABS 20,0x18,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø4 mm, Ø3,7 mm)
1 x	Tubo acero (L 1000 mm, Ø6 mm, Ø5,7 mm)
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
2 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Cable BEC 30 cm (macho)
1 x	Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH
3 x	Tubo ABS 9,0x8,0x1000 mm
1 x	Cable carga emisora GRAUPNER
1 x	Tubo ABS 7,0x5,0x1000 mm
1 x	Tubo ABS 5,0x4,0x1000 mm
1 x	Tubo ABS 7,0x6,0x1000 mm
2 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
1 x	Adaptador MPX-XT60 10cm
1 x	Circlick seguridad
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	CC 02
1 x	Cable USB para programación HLS
1 x	Adaptador 4 LiPos XH>EH
1 x	Cable "Y" equilibrador 5S, 2x JST-XH / 1x JST-EH
1 x	Adaptador JST-XH
1 x	BEC Mini JETI
1 x	Tubo acero (L 1000 mm, Ø9 mm, Ø8,7 mm)
1 x	CC 03
1 x	Tubo ABS 12,0x10,0x1000 mm
1 x	APM2,6 Power module con BEC 5,3 V DC
2 x	Tubo ABS 8,0x6,0x1000 mm
1 x	Cable de entrenamiento para GWS T4A II (maestro-alumno)
1 x	Tubo acero (L 1000 mm, Ø3 mm, Ø2,7 mm)
1 x	Adaptador TP/TopFuel - XH 2/3S
1 x	Tubo ABS 5,0x4,0x156 mm
2 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Tubo acero (L 1000 mm, Ø7 mm, Ø6,7 mm)
1 x	Tubo ABS 10,0x8,0x1000 mm
1 x	Tubo acero inox. Dia, 28 mm x 0.6 x 1000 mm
1 x	Tubo ABS 8,0x7,0x1000 mm
1 x	Rótula V2 M2 5Diam negra (2 pcs)
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
1 x	Rótula INDUSTRIAL con bola M3 (2 uds)
1 x	Conector banana oro 5,5 mm antichispa
1 x	Pletina MPX 6 pines (5 uds)
1 x	Cable servo PREMIUM 200m (blanco/rojo/azul)
1 x	PVC termo-retráctil batería 37 mm transparente (1 m)
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Conector banana oro 3,5 mm
1 x	Carro remolque para veleros 720 x 239 mm
1 x	Tubo carbono (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Plancha carbono 350x150x3.0 mm
1 x	Motor OS 3820-1200 eléctrico
1 x	Adaptador de hélice 2 mm M5
1 x	Adaptador de hélice 3,2 mm M5
1 x	Tubo ABS 18,0x16,0x1000 mm
2 x	Tubo de latón (L 1000 mm, Ø18,0 mm, Ø16,0 mm
1 x	Tubo ABS 3,0x2,0x1000 mm
1 x	Tubo carbono 3K-PW (Ø12 mm, Ø10 mm L:2000 mm)
1 x	Tubo carbono (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	USB cable ALTIS
1 x	Conector alas/fuselaje para 3 pines AWG 20-22
1 x	Medidor angulos tamaño pequeño
1 x	Conector alas/fuselaje para 12 pines AWG 20-22
1 x	Tubo carbono/kevlar 3K-PW (Ø25 mm, Ø22.5 mm L:1500 mm)
1 x	Adaptador MPX-Dean "T"
1 x	PowerBox SparkSwitch RS
1 x	Tubo carbono (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Tubo carbono (L 1000 mm, Ø4 mm, Ø3 mm)
1 x	UBEC 6A KAVAN
1 x	Tubo carbono 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	Tubo carbono (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Switch electronico SXH HV
1 x	Servo NARO Max Std
1 x	Conector XT-60 (macho)
1 x	KIRA 400-34
1 x	AXI 2820/12 V2
1 x	Hélice MENZ-S 20x8 Pusher
1 x	Helice FIALA 18x8
1 x	Plancha contrachapado Abedul 600x300x1,2 mm
1 x	Helice FIALA 27x10
1 x	Batería LiPo GENS 3700 mAh 6S 22,2v 60C (Gens Ace)
1 x	Batería LiPo GENS 2600 mAh 2S 7.4v Pack Emisora (Gens Ace)
1 x	Batería LiPo GENS 4800 mAh 5S 18,5V 18C (Gens Ace)
1 x	Bateria Lipo GENS 450 mAh 2s 7.4v 20c Soaring
1 x	Batería LiPo GENS 5000 mAh 6S 22,2v 45C (Gens Ace)
1 x	Batería LiPo GENS 5500 mAh 5S 18,5v 25C (Gens Ace)
1 x	Batería LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace)
1 x	Helice FALCON 20x9 carbono-gas
1 x	Eje para motores AXI 2814/xx
1 x	Tubo ABS 6,0x5,0x1000 mm
1 x	Adaptador 5 LiPos XH>EH
1 x	LiPo TopFuel ECO-X 3000 mAh 3s 20C MTAG
1 x	Tubo ABS 16,0x14,0x1000 mm
1 x	DPS Interruptor JR/JR
1 x	PYRO 650-103 Eje Largo
1 x	KIRA 500-36 6,7:1
1 x	PYRO 700-45
1 x	KIRA 600-30 6,7:1
1 x	PYRO 750-50L
1 x	KIRA 480-43 5,2:1
1 x	Plano IKARUS
1 x	KIRA 480-38
1 x	PYRO 600-12
1 x	AXI 2826/8 V2 Eje largo
1 x	AXI 2820/8 V2 Eje largo
1 x	AXI 2814/10 V2
1 x	AXI 2814/20 V2
1 x	AXI 2212/20 V2
1 x	AXI 2814/16 V2
1 x	Hélice MENZ-S 16x12
1 x	Hélice MENZ-S 15x8
1 x	Hélice MENZ-S 20x6 Pusher
1 x	Helice FIALA 22x8 3-Blade madera

7,191.78EUR