120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

2 x	Windsock Ozone L -1200 mm
1 x	Wing OXY 5,0 m2
1 x	MAX pilot ARTF
3 x	Wing OXY 0,5 pulgadas2
1 x	Para-RC Mix
1 x	Ballast 700gr OPALE
1 x	Rescue 1,8m2 / BackPack
1 x	Trike XL motor set (motor+esc+prop)
2 x	Aramid 50 daN 50 m
2 x	Windsock Ozone L - 700 mm
3 x	Paramotor Trike XL
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	One touch canopy lock
1 x	Canopy Latch
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Extension silicon 100 cm (Graupner)
1 x	200 mm extensión servo HITEC/JR
2 x	Futaba male 40 cm extension
1 x	Premium servo extension 25cm
1 x	Extension silicon 100 cm (Futaba)
1 x	Extension 30 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension lead 15 cm Multiplex
1 x	Extension silicon 35 cm male (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension 90 cm (Futaba)
1 x	"S" set for planes
2 x	Red smoke bombs AX-60 (5 pcs)
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Smoke set "M"
2 x	"M" set
1 x	Blue smoke canister 100 g
3 x	Parachutist
1 x	White smoke canister 65 g
1 x	"S" set for boats
2 x	AX-60 starters (5 pcs)
1 x	Softshell Hispano Aviación
2 x	Red smoke canister 140 g
1 x	Ventral support for AX-18/AX-60
2 x	Smoke set "S"
1 x	Shirt Hispano Aviación
1 x	White smoke canister 100 g
2 x	Red smoke canister 100 g
2 x	Yellow smoke canister 100 g
2 x	White smoke bombs AX-60 (5 pcs)
1 x	Green smoke canister 65 g
1 x	Parachute expulsion foam
2 x	Black smoke bombs AX-60 (5 pcs)
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Blue smoke canister 140 g
1 x	Green smoke canister 140 g
1 x	Vest clothes Hispano Aviación
1 x	Smoke set "Glider"
2 x	White smoke bombs AX-9 (10 pcs)
1 x	3l Smoke oil
2 x	AX-60 starters (5 pcs)
2 x	PCARD Wireless System
1 x	Mixers smoke bombs AX-60 (5 pcs)
3 x	Yellow smoke canister 65 g
1 x	Initior Transmitter FTX2 Wireless
1 x	Cap Hispano Aviación
2 x	Red smoke canister 65 g
1 x	B4-0 rocket charges (6 pcs)
2 x	Green smoke canister 100 g
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Glases Nimbus
1 x	Glases Ace
1 x	Glases Nimbus "Black"
1 x	Long pinned hinge (6 uds)
1 x	Painting GHT Lexan Black 150 ml
1 x
1 x	Paramotor BackPack XXS 2
1 x	Parachute PV6 for F3J
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Antenna 50 mm (2 uds)
1 x	Ancla 40 x 24 mm (2 pcs)
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Split pin 1.6x16 mm (10 uds)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Split pin 1x8 mm (10 uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Landing gear frontal support 29x26x13,5
1 x	Pushrod octagone 4/3
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	ABS tube 14.0x10.0x1000 mm
2 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Extension silicon 50 cm (Futaba)
1 x	DYNAMOMETER S-1580
1 x	Optical RPM Sensor
2 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
2 x	ABS tube 8.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Extension silicon 75 cm (Futaba)
2 x	Remote electric ignition system
1 x	Remolcador "Jonny Hafenschlepper"
1 x	Initior Receiver FRX2 Wireless
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
2 x	Anchor of tow Met. 60 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Rigid coupling brass Ø 2 mm L: 15 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	Air Intake manifold 90° - Large
1 x	Allen wheel collar M4x4
1 x	Anchor 80 mm (2 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	3,2 mm Prop Adapter M5
1 x	Starter EM Gear Power 250
1 x	Tail gear set (60-120 class)
1 x	Tailwheel for 60/120 size
1 x	460 mm EPP Floats
1 x	Tailwheel for 20/60 size
1 x	Kit hydraulic brake
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	Propeller APC 11x8 Electric
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	Propeller APC 10x6 Electric Pusher
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Threaded coupler M3 (10 uds)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	10 mm aluminium spinner (Kavan)
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Extension silicon 25 cm (Graupner)
1 x	Futaba Female 40 cm extension
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Barandilla Ms 10x250 mm (2 pcs)
1 x	Ancla 35 x 22 mm (2 pcs)
1 x	Boat 43 mm (5 pcs)
1 x	Cable pass Ms 9x5 mm (10 pcs)
1 x
1 x	4 mm Prop Adapter M6
1 x	Bisagra de remo metal 28 mm de largo (2 pcs)
1 x	Anchor 25 mm (2 uds)
1 x	Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x	5 mm Prop Adapter M6
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Bocina Ms 18 mm (3 pcs)
1 x	Cabestrante 13 x12 mm (5 pcs)
1 x	Adapter 4,0 mm M8
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	82 mm INO spinner (carbon imitation)
1 x	Propeller APC 11x4.7 SF Pusher
1 x	F3A carbon 82 mm spinner for 12 mm axis
1 x	89 mm INO spinner (carbon imitation)
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Spinner 82mm Black ventilado
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x	DUPLEX 2.4EX Expander E2
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Charger SKY RC e680

12,080.72EUR