Top » Catalog » Kavan » KAV06GRE18B

109.00EUR

GRE-18 RTR Crawler 1:18 Blue
[KAV06GRE18B]

Fully assembled 1/18th scale RC crawler model, including electronics and battery pack. Perfect size for both outdoor and indoor off-road driving.

Enter the scale crawler world with our brand new models GRE-18
Perfect size.
The new range of 1/18th scale RC crawlers brings you the best of both big and small RC cars. From the bigger scale models, it inherits the outdoor ability, so it's good for a walk in nature, or a real expedition, while still having a compact size like its smaller relatives. This means you can pack it into any backpack and have it with you anywhere, anytime. And when the weather doesn't allow being outside, an adventurous course, full of obstacles can be found even in your living room!
Scale look.
Thanks to a cool bodyshell with scale accessories, the GRE-18 models are great to look at. Distinctive paint with transparent windows is complemented by molded bumpers, front grille, snorkel, side mirrors, roll cage and rear light covers. When turned on, the car comes to life by in-built LED lights. They have enough power for you to be able to drive in a dark, which provides an amazing atmosphere and a whole new experience.
For any terrain.
A tough metal frame, together with 4-link suspension system and soft dampers, provides enough ground clearance, angles and articulation for overcoming obstacles of the outdoor driving. Full time 4WD system, closed differentials and soft tires with deep thread will always deliver the traction you need. On the top of that, water-resistant electronics mean, you don't have to worry about any conditions - rain, mud, puddles, or deeper streams - nothing is going to stop you!
Always under control.
A strong motor is effortlessly tamed by reduction gearbox. Digital servo and quality remote control system will give you confidence and precision. The transmitter features a necessary settings for center trims, channel reverses and end point adjustment and thanks to an easy disassembly it won't take any extra space.
Ready for action.
Powerful battery pack with a capacity for up to 45 minutes run time and compact USB charging cable, that can be plugged into any mobile phone charger will keep you going at all times. Any time you find a tempting challenge, you will be ready.

Features
Great scale-looking lexan body shell with distinctive paint and transparent windows
Molded accessories like the front grille, side mirrors, snorkel, roll cage and more
Adjustable bumpers and body mounts
Realistic front and rear lights
Strong metal frame
4-link chassis with great articulation like on full-scale models
Long travel dampers with soft springs
Full-time 4WD system with 104:1 final drive ratio for great low-end torque and control
Locked differentials for excellent crawling performance
Realistic tires with soft rubber and good thread for any terrain, mounted on bead-lock rims
55T brushed motor with upgraded power
Chassis mounted 1Kg 3-wire digital waterproof servo for precise control
Fully waterproof receiver and ESC for any weather conditions
Free AUX port for additional lights, or FPV system
600mAh 7.4V 2S Li-Po battery pack, which lasts up to 45 minutes
Quality 2.4GHz digital radio system featuring digital trims, reverse and end point adjustment EPA
Transmitter can be disassembled to fit even smaller space
Compact USB charging cable
Available option parts

KAV06240071 GRE Aluminum Upgrade Shocks Set
KAV06240072 GRE Steel U-Joint Cross Ball Set
KAV06240074 GRE18 Steel U-Joint Drive Shaft Set
KAV06240079 GRE Optional Brass Wheel Weight - 24g

Technical data
Motor: 050 55T
Servo: 1Kg digital (3-wire)
Battery: 600mAh 7.4 2S Li-Po
Charger: USB 150mA
RTR set includes
Fully assembled GRE-24 vehicle with painted body and battery pack
Transmitter
USB charging cable
Wheel nut wrench
Screwdriver
Binding jumper cable
Spare springs
Instruction manual
Required for operation

4xAAA batteries for the transmitter

Wheelbase [mm] 155
Width [mm] 113
Length [mm] 275
Height [mm] 135
Weight [g] 280
Ground clearance [mm] 34
Wheel diameter [''] 2.2
Drive 4x4
Gear ratio 104:1
Motor type DC
Li-Po [čl.] 2
Chassis type Off-road,Crawler,Hobby

few units

Reviews

Quick Find

Shopping Cart

1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	ABS 500 x 400 x 0,5 mm (white)
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
2 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Buy Perforated film 100 cm / 10 m
1 x	Buy Perforated film 100 cm / 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x	ABS 500 x 400 x 1 mm (white)
4 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x	ARAMID honeycomb 1300x2600x2 mm
2 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Aluminium sheet 500x250x0,5mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Buy Perforated film 145 cm / 50 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Tube Pitot to PIXHAWK
1 x	PIX Hawk with accesories
1 x	PPM Encoder Module
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Vasa model Catapult
2 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
3 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
2 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	JR silicone servo wire 0,35 qmm / 5m
2 x	200m servo "Premium" wire (white/red/blue)
2 x	Silicone red 0,25 mm² wire (25 m)
1 x	Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Chopped glass fibre strands 0.2 mm
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	10m servo "Premium" wire (white/red/blue)
2 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Pilot "Anthony" (Slimline)
1 x	Pilot "Goose" (Slimline)
1 x	1/6 Pilot "Garry"
2 x	1/4 Pilot "Mike"
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x	Civilian pilot "Curt" size 9cm (Slimline)
2 x	1/10 Pilot "Jimmy"
2 x	1/4 Pilot "Heidi"
1 x	Pilot "Adolf" Legends Series (Slimline)
2 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	Pilot JAN 1/4 Saiplanes
1 x	1/6 Pilot "Buddy"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Piloto JET 1:3,5
1 x	1/6 Pilot "Tony"
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Cockpit plastic closing
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Silicone red 2,5 qmm wire ( 1 m)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon plate 550x350x1.5 mm ECOTECH
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Fiberglass plate 350x150x2.0 mm
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Fiberglass plate 620x540x2,0 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Fiberglass plate 350x150x3.0 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Fiberglass plate 620x540x0,3 mm
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon plate 700x550x0.5 mm
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Foam plastic plates (310x210x5 mm)
1 x	Teflon rollers 80 mm x 15 mm Diam.
2 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x	BOX-Setup Actro-marine
1 x	SC NAVY V15R
1 x	Cotton Flocks, bag/ 500 g
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x
1 x	Motor RACE 20 Navy 12v
1 x	Motor ACTRO 35-4-790
1 x	Reguladro ACTROCON 60A
1 x	Aqua RACE 70 (without motor)
1 x	Thixotropic agent tin/ 15 g (approx. 350ml)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x	Cotton Flocks, bag/ 7 Kg
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	Adapter 3,0 mm M8
1 x	Adapter 4,0 mm M8
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	BETA 1400 ARF Red
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
2 x	Combo 4 pcs AXI 2204 Multicopter
1 x	ESC ALPHA 60A HV
1 x	Locking cable tie 4.6x203 (uds)
1 x	Adapter 4,0 mm M6
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	Adapter 5,0 mm M8
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Adaptadores carga 6s JST-XH
1 x	Engine mounts for .09 - .19 engine
1 x	SKY RC T400Q Charger 4x100w
2 x	Quadcopter Q50 Kit Carbon Fiber
2 x	Fuel bottle 500 ccm
1 x	Ciano KAVAN Medium 20g
1 x	Spare Part Frame Set for EACHINE RACER 250
2 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x	Spinner 40 mm Black (Kavan)
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Glow Plug Clip 1.3 Ah
1 x	Ciano KAVAN Thin 20g
2 x	Pin hinge 39x20 mm (10 uds)
2 x	Kavan Car 25% nitro 1l
2 x	Ciano KAVAN Super Thin 20g
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Conector MT-60 (pair)
1 x	Glow starter with charger 230v
2 x	F450/550 Quadcopter, landing gear
1 x	Charger SKY RC e680
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	BETA 1400 RTF Red
2 x	XT60 Connector with Holder Male 2pcs
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	FA27.2×8.9 Prop-2PCS/PAIR
2 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
2 x	P 17×5.8 Prop-2PCS/PAIR
1 x	Propeller set 400 (2R+2L)
1 x	Motor brushless 1806 - 2300 Kv Cuadracopter
2 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
2 x	T-Motor U7-V2.0 Kv420
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Silicon red 1,0 qmm cable ( 25 m)
1 x	Glass fibre braided sleeve (45mm) roll 10m
2 x	Glass fibre sleeve Ø 20 mm X 10m
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Silicone black 4,0 qmm wire ( 1 m)
1 x	Silicone red 0,75 qmm wire ( 1 m)
1 x	Cyano INSTA - FLEX+™ (25g)
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	1/6 Pilot "John"
1 x	1/6 Pilot "Cindy"
1 x	Vest clothes Hispano Aviación
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x	Styrene plate 320x120x1.0 mm
1 x	Carbon plate 500x400x2.0 mm ISOTECH
1 x	Silicone red 0,5 qmm wire ( 25 m)
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Cable Cargador FUTABA
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	Silicone red 0,5 qmm wire ( 1 m)
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Propeller POWER-PROP 7x7
1 x	Carbon plate 1000x500x2,0 mm ECOTECH
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Thread locker IC-Loc™ green "wicking" 10 ml
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x	Hitec 52 mm servo arm
1 x	HITEC 20 mm servo arm with ball link
1 x	FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x	Metal ring front FEMA
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Epoxy 5min KAVAN 2x 100g
1 x	Cable coupler M3 (10 uds)
1 x	Rubber Insert hard, 1 Pcs.
1 x	Servo GO-1053 MG 20.0kg
1 x	Metal ball clevis M3 (10 uds)
1 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	Servo GO-09 9g
1 x	Ciano KAVAN Thick 20g
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	L-shaped servo mount
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Futaba 38 mm servo arm
1 x	Adapter rotula M3
1 x	Futaba 30 mm servo arm with M3 ball link
1 x	M3 Maxi ball link (2 uds)
1 x	SIG Coverall 1.2x0.9 m
1 x	LiPo KAVAN 3700 mAh 11.1v 40/80C
1 x	Flybar support metal LAMA
1 x	Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x	AXI 2204 Multicopter
1 x	10 mm aluminium spinner (Kavan)
1 x	Brake for 140 mm wheels
1 x	Gearwheel 9724/09 for ZG 45
1 x	Servo arm with 6 mm hole to FEMA 9800A
2 x	Set freno para ruedas Dia. 127 mm
1 x	Hitec 46 mm servo arm with ball link
1 x	17 mm servo arm with ball link DES Graupner
1 x	Futaba 38 mm servo arm with ball link
1 x	Futaba 52 mm servo arm
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link
1 x	Hitec 25 mm servo arm with ball link
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	Connectors MPX male
1 x	Hitec 25 mm servo arm with M3 ball link
1 x	Hitec 30 mm servo rounded arm
1 x	Futaba 30 mm servo rounded arm
1 x	Hitec 20 mm servo arm
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Skies 2x 335 mm + 1x Esqui 250mm
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	Set montaje amortiguador para modelos 8-16 Kg
1 x	Mudguard wheels 112/127 mm
1 x	Fully Threaded Steel Rod M3
1 x	USB programador GO servos
1 x	SIG Coverall 1.2x1.8 m
1 x	Lipo KAVAN 2200 mAh 11.1v 30/60C
1 x	Extension 90 cm (Futaba)
1 x	Maxi Fuel Filter
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x	Pin hinge 26x11 mm (10 uds)

20,073.02EUR