Top » Catalog » Kavan » KAV201013MG

22.00EUR

Servo GO-1013 MG 3.8kg
[KAV201013MG]


High torque programmable digital pico servo 13g with titanium gear and input voltage range 4.8-6.0V, 2xBB, ideal for small model aircraft, 1:14-1:24 RC cars, 400-450 size helis etc. Torque 3.0kg.cm, speed 0.15s/60° at 4.8V, torque 3.8kg.cm, speed 0.12s/60° at 6.0V. Aluminium middle case heatsink for perfect cooling under high load.

High Torque programmable digital pico servo with titanium gear and double BB-ed output shaft for small RC model planes, 1:14-1:24 RC cars, 400-450 size helicopters etc. Plastic case with middle aluminium heatsink for perfect cooling under high load.
GO-1013MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
Reverse: Reverses the servo movement direction.
Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo.
Standard input voltage range 4.8-6.0 V (nominal).
25T/4.94 mm output shaft.
Servo dimensions Micro
Servo type Digital
Programmable Yes
Thrust at 4.8V [kg/cm] 3
Thrust at 6.0V [kg/cm] 3.8
Speed at 4.8V [s/60st.] 0.15
Speed at 6.0V [s/60st.] 0.12
Servo gears Titanium
Ball bearings 2×
High-voltage No
Power supply [V] 4.8 - 6
Length [mm] 22.8
Width [mm] 12
Height [mm] 29.4
Weight [g] 15
Intended for Aeroplanes,Helicopters,On-road cars,Off-road cars,Boats


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Brazo servo MKS Doble Metal L:2.5/3 inc
Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
2 x LOWER TOW HOOK
1 x Horn 6/20 with M3 Bearing
1 x Brass control horn M2 short for wire (2 pcs)
4 x Tow hook for tug
2 x Brass control horn M2 long for wire (10pcs)
1 x Horn 5/20 with M2 Bearing
2 x 6 mm aluminium horn with patella
2 x Adjustable brass horn threaded M3
3 x SERVO HOLDER
2 x Horn mando small (2 pcs)
2 x Horn DUBRO 1/2A
2 x Brass control horn M2 large for wire (2pcs)
1 x Brass control horn M4 short for wire (10pcs)
2 x 6 mm M3 variable inclined horn
2 x Horn 6/35 with M3 Bearing
1 x Cable control set
2 x Horn 5/15 with M2 Bearing
1 x Brass control horn M4 short for wire (4 pcs)
1 x Horn 5/10 with M2 Bearing
1 x Towing hook
2 x Fixed launching hook
2 x Cable with accesories
1 x Horn micro type4 Ø 0,5 (2 pcs)
2 x Towing hook
2 x Towing hook <3m
1 x 20 mm carbon horn
1 x Brass control horn M3 short for wire (2 pcs)
1 x 6 mm blue aluminium threaded horn with patella
3 x DYNAMOMETER S-1580
2 x 5 mm M2 variable horn
2 x 6 mm red aluminium threaded horn with patella
1 x Oratex Natural White 20m
1 x Oracover Red 2 m
1 x MYLAR film A350 (1000x500 mm)
2 x Oracover Yellow CADMIO 10 m
1 x ORACOVER Ferrari red (2 m)
1 x ORACOVER Fluor red (2 m)
1 x Ply-Span 450x600/13g Black
1 x Oracover Orange 2 m
1 x PROFICOVER 5m
1 x Oracover White 2 m
1 x Oracover Black 2 m
2 x Oracover Verde 2 m
2 x Oracover Yellow CUB 10 m
1 x Monokote ROJO misil (1.8x0.65m)
1 x Ply-Span 450x600/13g Blue
1 x Digital Air Speed Sensor And Pitot Tube Set
2 x SIMtransmitter 6 Mode 2
2 x Lock washer 2.2 mm (20 pcs)
1 x M3 black washers (4 pcs)
2 x Aluminium wide washer M3 gold (4 pcs)
2 x Aluminium wide washer M4 Red (4 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x EasyFLY Addon
3 x Interface Realflight Simulator
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Slave-cable USB Easy Sim
1 x Lock washer 2.7 mm (20 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
2 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
3 x Aluminium cap bolt washer M3 green (8 pcs)
2 x M3-M4 rubber washer (8 pcs)
2 x Quicklock washer 2.5 mm (10 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x 1/7 Pilot "Japanese"
3 x 1/12 Pilot "Fighter"
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 1/12 Pilot "Tom"
1 x Spikes Band (5 m)
1 x Pilot "Goose" (Slimline)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x 20x1000 mm Ring Strap Back To Back
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Civilian pilot "Curt" size 9cm (Slimline)
2 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Civilian pilot "Pamela" size 9cm (Slimline)
2 x Pilot "Duke" Legends Series (Slimline)
2 x SE Ring 360 mm (2 pcs)
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x SE Ring 400 mm (2 pcs)
2 x Piloto JET 1:3,5
1 x SE Ring 250 mm (2 pcs)
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
2 x 1/12 Pilot "Cougar"
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 1/4 Pilot "Mike"
4 x 1/6 Pilot "Buddy"
1 x SE Ring 450 mm (2 pcs)
1 x WingFix ULTRA Black Edition
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Actuador lineal HLS12-100210-7.4v
4 x Long horn 50x26
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
3 x CA Glue fast 20g
3 x Carbon fiber rod 1.5 mm x 2000 mm
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
3 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
2 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
2 x Carbon fiber flat 1000x6.0x0.8 mm
2 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
2 x Carbon fiber rod 3.0 mm x 1000 mm
1 x 2,3 mm Prop Adapter M6
2 x Micro control horn T2 Ø 1
1 x Rudder forward 80x28 "type Kato"
1 x 3,2 mm Prop Adapter M6
1 x 3.17 mm Prop Adapter CN-Spinner
1 x 3.2 mm Prop Adapter M6
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x 11x7 tree blades propeller
1 x 14 mm Portholes for screws (10 pcs)
1 x 15x7 tree blades propeller
1 x Adjustable launching hook
1 x 120x60 mm SLH KOVO wheel
1 x Carbon fiber rod 5.0 mmx1000 mm
2 x Spring lock washer 2.6 mm (20 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x 1/4 Pilot "Heidi"
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x 
1 x Ferrita 14x8x5.5 mm
2 x Fully Threaded Steel Rod M2,5 (2 uds)
2 x Horn 20x28,5 mm (2 pcs)
1 x Ferrita con funda
2 x 6 mm M3 variable horn
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Nut for mounting M6 (4 pcs)
1 x Blind nut M4 (10 pcs)
1 x Lock nut aluminium M3 (4 pcs)
2 x Quicklock washer 3 mm (10 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Blind nut M3 (4 pcs)
1 x Lock nut M6 (10 pcs)
2 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Interface Jack Adapter IKARUS
1 x Lock nut aluminium M2.5 (4 pcs)
1 x Short adjustable control horn 3x24
3 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Quicklock washer 2 mm (10 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Hexagonal Nut M2.5 (10 pcs)
1 x Blue Aluminium lock nut M4 (4 pcs)
2 x Blue Aluminium lock nut M3 (4 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
2 x Aluminium wide washer M4 Gold (4 pcs)
1 x Hexagonal Nut M4 (10 pcs)
1 x Blue Aluminium lock nut M2 (4 pcs)
2 x Tapping Screw M2.9x9.5 (10 pcs)
1 x Blade holder lower
1 x Screws flush mount M2
1 x Complet landing gear
1 x Fuselage Autogyro RAINBOW
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Piloto jet 130 mm
1 x 1/12 Pilot "Langley"
2 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x SE Ring 480 mm (2 pcs)
1 x 2,3 mm Prop Drive Günther M4
2 x 1/6 Pilot "Cindy"
1 x Marker ties (20 pcs)
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
2 x SE Ring 200 mm (2 pcs)
2 x BETA 1400 RTF Red
2 x Pin hinge 39x20 mm (10 uds)
2 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
2 x 
1 x Charger SKY RC e680
1 x Engine mounts for .09 - .19 engine
1 x GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x Teflon rollers 80 mm x 15 mm Diam.
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
2 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
2 x MEKP Harderner 100 g
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Universal Colour Paste deep black 250 g
1 x Cyanocrylate MD GA460 odourless 20g
1 x Release wax 250ml
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x FIALA Propeller 19x12 Electric
1 x SlowFlyer control horn (3 pcs)
2 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x Micro control horn (2 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Adaptadores carga 6s JST-XH
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x 
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Ciano KAVAN Medium 20g
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x XT60 Connector with Holder Male 2pcs
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x BETA 1400 ARF Red
1 x 
2 x Electric Fuel Pump 12v
1 x Ciano KAVAN Thin 20g
2 x Ciano KAVAN Thick 20g
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Conector MR-60 (pareja)
2 x KAVAN Hand crank fuel pump
1 x Pin hinge 26x11 mm (10 uds)
1 x Pin hinge 34x16 mm (10 uds)
1 x SKY RC T400Q Charger 4x100w
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
2 x Ball Bearing Oil 25 ml
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x Fuel bottle 500 ccm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Buy Perforated film 100 cm / 10 m
1 x Buy Perforated film 100 cm / 50 m
2 x Buy Perforated film 100 cm / 20 m
2 x Ball Link M2 with Ball and Hardware, 10 pcs
2 x Ciano KAVAN Super Thin 20g
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Buy Perforated film 145 cm / 50 m
2 x Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
2 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x Medium extra-strong control horn with bearing 2,8x24
2 x Horn F3A de Titanium 16 mm (2 units)
1 x Brass control horn M4 long for wire (4 pcs)
2 x Presto SF Light Filler styrene-free (420 g)
1 x Glass fibre sleeve Ø 20 mm X 20m
1 x Glass fibre sleeve Ø 20 mm
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Chopped glass fibre strands 3 mm
1 x Glass fabric 49 g/m² (1,27 x 20 m)
2 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
2 x Horn mando long (2 pcs)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x Glass fibre braided sleeve (45mm) roll 10m
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Film release agent PVA 25 ml
1 x Vacuum bag, 1200 mm x 50 m
1 x Glass fabric 80 g/m² (twill) 100 cm x 50m
1 x Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x Epoxy 5 min. 500 g (Resin)
1 x Laminating brush 10 mm, pack/ 50 pcs
1 x Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Glass fabric 80 g/m² (silane, twill) 100 cm x 50m
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x Universal Colour Paste deep black 50 g
1 x White gelcoat 1 Kg
2 x Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Mould Resin P 10 kg
1 x Thixotropic agent tin/ 15 g (approx. 350ml)
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric 49 g/m² (1,27 x 10 m)
2 x Rudder forward 70x28 "type Kato"
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Hardener P-25, canister 2.5Kg
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x Small adjustable control horn with bearing
2 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x ORACOVER transparent Yellow (10 m)
1 x Propeller set 400 (2R+2L)
1 x Oracover light Grey 2m
1 x Oracover ROYAL RED 2m
1 x Oratex Antik 2m
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Ferrita 17x10x6.5 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
2 x Control horn long w/ball
1 x Long adjustable control horn 3x34
1 x Screw M3x5 (10 pcs)
1 x Tapping Screw M2.2x9.5 (10 pcs)
2 x Cierva C30 Elevator
1 x Nylon Screw M4x20
1 x Adapter 3,2 mm M6
1 x Cable adapter iCharger
1 x Balls 4 mm
1 x Pilot "Dick" Legends Series (Slimline)
1 x 1/6 Pilot "John"
1 x 
1 x Head lower part New
1 x Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x Ply-Span 450x600/13g White
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Oracover Yellow CADMIO 2 m
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Motor Mega AC 16/07/04
1 x Mega Motor RC 400 F5J 1950KV
1 x Screw M3x20 (10 pcs)
1 x Motor Mega AC 16/30/01
2 x Head upper part
1 x Baering 3x8x4
1 x Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
2 x Nut M1,6
1 x A60-6XS V4 28-Pole
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Adapter 3,0 mm M8
1 x Head runner
1 x Screws M1,6x6 Allen
1 x Nut M2
1 x Conector MT-60 (pair)
1 x Horn 13,5x16 mm (2 pcs)
1 x Spinner white 40 mm
1 x Crystal TX 35.150 Ch 75
1 x Glow starter with charger 230v
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Propeller balancer
1 x Glass fabric 390 g/m² aero,10x1m
1 x 30 mm Alu spinner 3 mm pleg. propeller
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Spinner propeller pleg. 40 mm / 5,0 mm
1 x Spinner propeller pleg. 30 mm / 3,2 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x 34 mm Alu spinner 4 mm pleg. propeller
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Spinner propeller pleg. 40 mm / 5,0 mm
1 x Spinner propeller pleg. 30 mm / 4,0 mm
1 x XPower H PROP HUB Ø6.0/42.5mm 0º
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Spinner propeller pleg. 30 mm / 4,0 mm
1 x Spinner propeller pleg. 38 mm / 4 mm
1 x Spinner propeller pleg. 33 mm / 5,0 mm
1 x Spinner propeller pleg. 40 mm / 6,0 mm
1 x Screwdriver for Hexagon 1,5mm
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x Adapter 3,0 mm M6
1 x Cierva C30 Body Spain
1 x Blade holder upper
1 x Allen wheel collar M3x5
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Servo Fork
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Crystal TX 35.050 Ch 65
1 x Crystal TX 35.100 Ch 70
1 x Flybar support metal LAMA
1 x 25 mm Sandpaper file
1 x Battery LiPo GRE18 600 mAh 7.4v
1 x Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x Glow Plug Clip 1.3 Ah
16,588.82EUR
Manufacturers
Manufacturer Info
Kavan
- Other products
Notifications
NotificationsNotify me of updates to Servo GO-1013 MG 3.8kg
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce