Top » Catalog » Kavan » KAV30.1638C

120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]


Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Emisora Spektrum NX10 10ch (solo Tx)
Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x 76x23 Ø3.5 mm aluminium core wheel
1 x 110x55 mm C SLH KOVO wheel
1 x 70x23 Ø3.5 mm aluminium core wheel
2 x 120x60 mm C SLH KOVO wheel
1 x 44.5x17 mm (1.75") Type jets aluminium core wheel
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x 76x24 mm (3.0") Type jets aluminium core wheel
1 x 73x24 mm hard foam KOVO wheel (2 pcs)
1 x 90x45 mm hard foam KOVO wheel
1 x 35x14 mm hard foam KOVO wheel (2 pcs)
1 x 80x40 mm hard foam KOVO wheel
1 x Foam wheel Ø 38 mm (2 pcs)
1 x 45x19 mm hard foam KOVO wheel (2 pcs)
1 x Foam wheel Ø 351 mm (2 pcs)
1 x 100x50 mm SLH KOVO wheel
1 x 63x12 mm foam special light KOVO wheel with radius (2 pcs)
1 x 45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x 115x29 mm (4.50") Type jets aluminium core wheel
2 x 64x20 mm (2.5") Type jets aluminium core wheel
1 x 170x54 mm SLH KOVO wheel with bearing and metal hub
1 x 2.5 inch aluminium core wheel (1 pcs)
1 x 69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x 89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x 73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x 60x25 mm tail wheel "type F3A"
1 x 120x60 mm SLH KOVO wheel
1 x 43x14 mm hard foam KOVO wheel (2 pcs)
1 x Mahogany wood slat 1.5x1.5x1000 mm
2 x Digital Air Speed Sensor And Pitot Tube Set
2 x Pine wood slat 2.0x10.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
2 x Walnut wood slat 2.0x2.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
2 x Liston HAYA 8 x 8 x 1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
2 x BALSA leading edge 8x10x1000 mm
1 x PPM Encoder Module
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
2 x Pine wood slat 5.0x5.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Tube Pitot to PIXHAWK
1 x SE Ring 250 mm (2 pcs)
2 x Tape GFK 50 mm
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 450 mm (2 pcs)
2 x SE Ring HACKER 300 mm (2 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x Horn 20x28,5 mm (2 pcs)
2 x Carbon fiber rod 5.0 mmx1000 mm
1 x LH long aluminium horn L31xH30 (2pcs)
2 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Carbon fiber rod 1.0 mm x 1000 mm
2 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Horn 6/27 with M3 Bearing
1 x Brass control horn M4 short for wire (4 pcs)
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Cable with accesories
1 x Carbon fiber rod 1.5 mm x 1000 mm
2 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Small aluminium horn red (2pcs)
2 x Carbon fiber rod 7.0 mmx1000 mm
2 x 20 mm carbon horn
1 x Small aluminium horn gold (2pcs)
1 x Cable control set
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Brass control horn M4 short for wire (10pcs)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Squared carbon wing joinner 5x5x220 mm
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Small aluminium horn blue (2pcs)
1 x Horn 5/20 with M2 Bearing
1 x 6 mm aluminium horn with patella
2 x LH long black aluminium horn L31xH30 (2pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Horn for flap control (1 pcs)
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Horn 5/15 with M2 Bearing
1 x Horn 6/20 with M3 Bearing
2 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Carbon fiber rod 20 mmx1000 mm
1 x 400 Newtons FEMA absorber
1 x Parachute P4
1 x AX-60 starters (5 pcs)
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x ABS tube 4.0x3.0x1000 mm
1 x 140 mm rods + T patellas set for direction control
1 x Plastic wheels 28 mm (2 pcs)
1 x 32x9 mm foam standar KOVO wheel (2 pcs)
1 x 76 mm light wheels (2 pcs)
1 x BALSA trip 10x10x1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Lite Plywood panel 600x300x3.0 mm
1 x Lite Plywood panel 600x300x2.0 mm
2 x A/C quality beech plywood 600x300x5.0 mm
2 x Balsa panel 1.5x100x1000 mm
2 x Birch plywood plate 600x300x3.0 mm
1 x Balsa panel 2.5x100x1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Pine wood slat 10x10x1000 mm
3 x SlowFlyer control horn (3 pcs)
2 x SE Ring 330 mm (4 pcs)
1 x Tape GFK 25 mm
3 x Foil for sticking flaps and ailerons
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 350 mm (2 pcs)
1 x 4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Spikes Band (5 m)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
2 x PIX Hawk with accesories
1 x Cinta Goldfix 1m
3 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x 
1 x Avia spare blue cockpit (Top Model)
1 x Fascination 3600 mm ARC
1 x FOX 3000 mm, Fuselage (FMS)
1 x Avia spare fouselage CF reinforced (Top Model)
1 x Ciano KAVAN Thin 20g
1 x 45 mm aluminium spinner (Kavan)
1 x Short adjustable control horn 3x24
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x Conector MT-60 (pair)
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Long adjustable control horn 3x34
1 x Long horn 50x26
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x Medium extra-strong control horn with bearing 2,8x24
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x Long adjustable control horn with bearing
1 x Propeller POWER-PROP 13x9 Izda
1 x Propeller electric carbon 6.5x4
1 x 12x6 tree blades propeller
1 x Propeller POWER-PROP 14x12
1 x VITAPROP CARBON FOLDING PROP 15x9.5"
1 x Propeller CFK 13x9
1 x QUANTUM II 55 Brushless Motor
1 x Propeller CFK 18x9
1 x Propeller CFK 15x13
1 x Propeller CFK 18x17
1 x Propeller POWER-PROP 13x10
1 x Propeller POWER-PROP 11x9
1 x 6x4 tree blades propeller
1 x Propeller POWER-PROP 11x8
1 x Propeller electric carbon 9.5x7
1 x Propeller electric carbon 10.5x6
2 x Beech dowels 4.0 x 1000 mm
1 x 15x7 tree blades propeller
1 x Propeller POWER-PROP 10x6
1 x Propeller POWER-PROP 13x9
1 x Porpeller HUNTER 400
1 x Propeller POWER-PROP 13x8
1 x Propeller electric carbon 8.5x7
1 x Propeller electric carbon 8.5x5
1 x Propeller POWER-PROP 12x6
1 x Propeller electric carbon 10x6
1 x Propeller electric carbon 10x8
1 x Propeller POWER-PROP 10x7
1 x Propeller POWER-PROP 12x9
1 x Porpeller HUNTER 480
1 x Propeller POWER-PROP 10x7 Izda
1 x Propeller electric carbon 8.5x6
1 x Propeller electric carbon 10x7
1 x Propeller electric carbon 10.5x8
1 x Propeller electric carbon 9.5x6
1 x Propeller electric carbon 6x5
1 x Propeller CFK 18x19
1 x Propeller CFK 20x13 "white"
1 x Propeller CFK 14x8
1 x A/C quality beech plywood 600x300x0.8 mm
2 x Birch plywood plate 600x300x2.5 mm
1 x Balsa panel 3.0x100x1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Servo MKS 6100 DS
1 x Servo MKS 6100 DS
1 x Servo MKS HV1220
1 x Spray EC Red 400ml
1 x Birch plywood plate 600x300x2.0 mm
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Adapter lead MPX/XT60
1 x SE Ring 360 mm (2 pcs)
1 x 2 piece mounting frame
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 200m servo "Premium" wire (white/red/blue)
1 x Propeller MENZ-S 20x9
1 x Propeller MENZ-S 18x8
1 x Albatros red/white (Top Model)
1 x Superlight deluxe wheel 75 mm (2 pcs)
1 x FALCON 24X10 CARBON PROPELLER (GAS)
1 x Ball link M2 (10 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
4,736.52EUR
Manufacturers
Manufacturer Info
Kavan
- Other products
Notifications
NotificationsNotify me of updates to Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce