120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Varilla ABS 1,5x1000 mm
1 x	Varilla ABS 2,5x1000 mm
1 x	Liston ABS 2.0x10.0x1000 mm
2 x	Liston ABS I 10x5x1000 mm
1 x	Liston ABS I 3,5x1,75x330 mm
2 x	Varilla ABS 3,0x1000 mm
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Liston ABS 1,5x3,0x1000 mm
2 x	Liston ABS H 1,5x1,5x330 mm
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Liston ABS 1,0x4,0x1000 mm
2 x	Varilla ABS 6,0x1000 mm
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Varilla ABS 1,25x1000 mm
2 x	Liston ABS 1,5x2,0x1000 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Liston ABS 1,0x3,0x1000 mm
2 x	Liston ABS I 20x10x1000 mm
1 x	Liston ABS 1,0x2,0x1000 mm
2 x	Liston ABS 1,5x6,0x1000 mm
1 x	Perfil de ABS "L" 3,0x3,0x1000 mm
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Perfil Acero Inox. 11.5x6.5x1000 mm
1 x	Conector ABS "L" 1.0 mm x 1000 mm
1 x	Perfil Acero Inox. 7.5x4.5x1000 mm
1 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Perfil Acero Inox. 9.0x5.0x1000 mm
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Conector ABS "L" 1.5 mm x 1000 mm
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Perfil de ABS de media caña 2,5x1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Canal de ABS de 1,0x2,0x1000 mm
1 x	Perfil de ABS "L" 5,0x5,0x1000 mm
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
1 x	Liston ABS 1,5x8,0x1000 mm
2 x	Varilla ABS 4,0x1000 mm
2 x	Carro remolque para veleros 720 x 239 mm
1 x	Extension silicona 30 cm macho (Graupner)
1 x	Conector banana oro 8,0 mm. 5 pcs (macho)
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
1 x	Bayoneta aluminio/strongal D25 mm/1 m
1 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Perfil de ABS triangular 6.0x1000 mm 90º
1 x	Perfil goma 8-2 mm 2M
1 x	Microbalones (0,12 g) 350 ml
1 x	Thixotropic agente TM100, tin/415g (aprox. 5 L)
1 x	Perfil goma 6-2 mm 2M
1 x	Adhesivo Leds 2x2 ml
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Microbalones (2.5g/cm3 - Aprox 1L)
1 x	Perfil de ABS triangular 2.0x1000 mm 90º
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	Adaptador para motor A60-V2
2 x	Equilibrador hélices
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Medidor angulos y/o incidencias
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 50m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Rótula M3
1 x	Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x	Plancha ABS 500 x 400 x 0,5 mm (blanca)
1 x	Plancha ABS 500 x 400 x 1 mm (blanco)
1 x	Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 100 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 5 m
1 x	Medidor ángulos
1 x	Polvo de algodon 7 Kg
1 x	Epoxy 40 min. (3,5 Kg) 2,5 kg Resina / 1 kg Hardener
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Epoxy 5 min. 500 g (Acelerador)
1 x	Tren aterrizaje Electrico "Black Edition" ULTIMATUM 2.0 (Electro
1 x	Deposito ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO
1 x	UHU Por 50ml/40g
1 x	Bayoneta BULL MØ1 2.600mm
1 x	Conector FESTO M7 racor XL Tygon
1 x	Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x	Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x	Pipa Jet ULTIMATUM 2m
1 x	Deposito ULTIMATUM 2.0 (3.2 L) PRO
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Epoxy Resin L + Hardener LT kit/ 895g
1 x	Bayoneta ULTIMATUM 2.0 m
1 x	Agente espumante para resinas epoxycas 200g
1 x	Set transmisiones ULTIMATUM 2.0 (duraluminio)
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Epoxy 40 min (Acelerador). 10Kg
1 x	Pegamento FOAM - CURE™ (24g)
1 x	Tren aterrizaje Electrico "Black Edition" BULL Mo1 2.6 (Electron
1 x	Tren aterrizaje Electrico "Black Edition" BULL Mo1 2.6 GS200 (El
1 x	Racor "Y" 3 mm
1 x	Conector FESTO "Y" 6-6-6 mm
1 x	Conector FESTO "T" 6-6-6 mm
1 x	Racor 2/3 mm
1 x	Conector FESTO "Y" 2 mm
1 x	Conector FESTO 1/8 Quick 6mm 90º
1 x	Conector FESTO 4-4mm antirretorno
1 x	Racor 3/3 mm
1 x	Conector FESTO 6-6mm
1 x	Combustible Glow 4T "KAVAN" air/heli 15% nitro
1 x	Bateria LiPo GRE18 600 mAh 7.4v
1 x	Relleno balsa KAVAN 200ml - color balsa
1 x	Ciano KAVAN Thin 20g
1 x	Ciano KAVAN Super Thin 20g

8,605.24EUR