120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	DINAMOETRO S-1580
1 x	Sensor RPM Optico para Dinamometro
1 x	Alicate para hacer "Z"
1 x	Camara USB micro endoscopica
1 x	Destornillador allen "Hex" Ø 2.0 molibdeno
2 x	Bascula precisión 0.1- 600 g
3 x	Banda lijado g. 180 para BSL 220/E (5 pcs)
2 x	Destornillador allen 2,5x60 mm molibdeno
1 x	Arrancador Sullivan-STAR 601
2 x	Conector "T" 6-6-6 mm tubo bomba vacio
3 x	Destornillador allen 2,0x50 mm molibdeno
2 x	Barra pegamento caliente Verde
2 x	Alicate para hacer "Z"
1 x	Arrancador 12v (Max 180 and 30ccm)
2 x	Crimpadora
3 x	Destornillador allen 3,0x60 mm molibdeno
2 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Barra pegamento caliente Negro
1 x	Copiador 2 unidades de 20 cm
2 x	Barra pegamento caliente Rojo
1 x	Arrancador Sullivan-STAR 603 DINATRON
1 x	Alicate para "Ball-Link"
1 x	Camara 800 TVL CMOS para FPV
1 x	Arrancador EM Gear Power 250
3 x	Destornillador allen 1,5x50 mm molibdeno
2 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Bomba de vacio P1-N
2 x	Acumulador polvo para limpieza moldes
1 x	Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x	Crimpadora
1 x	Alicate para "Ball-Link"
1 x	Bascula precision 0.1-2000 g
2 x	Destornillador Torx® TX6
1 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x	Gorra Jeti Negra
1 x	Hélice POWER-PROP 14x9
1 x	Hélice POWER-PROP 13x9 Izda
1 x	LASER 73" 1.85m (05) PILOT
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Helice FALCON 20x9 carbono-gas
1 x	Pistola para botes de pintura
1 x	Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x	Tapaporos 1000 ml (DOPE)
1 x	Tubo acero inox. Dia, 28 mm x 0.6 x 1000 mm
1 x	Conector banana oro 8,0 mm
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Rótula M3
1 x	Piloto 1/10 "Jimmy"
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Conexión de vacío VA 1 (para manguera Ø 6 mm)
2 x	Guantes M vynyl IDEAL Light (100 pcs)
2 x	Hélice sistema de paso variable 9" para Axi VPP (recambio)
1 x	Plancha entelar Std
1 x	Molde conector Dean-T
1 x	Medidor digital de peso, equilibrio y angulos BASIC
1 x	Molde conector XT-60
1 x	Perforador hélices para EME35 y DLE35
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Bisagra Pequeña flexible (12 uds)
1 x	Bisagra PIN mediana (12 uds)
1 x	Bisagra Redonda flexible (12 uds)
1 x	Bisagra pequeña con pin metalico (6 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Acoplador M3 (10 uds)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Acoplador para cable M4 (10 pcs)
1 x	Ball link latón BS M3 V1 (10 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Gancho de remolcador
1 x	Hoja sierra 65mm Diamond para OZI/E
1 x	Tijera curva PREMIUM 16 cm
1 x	Plancha entelar Profi LCD
1 x	Mini termometro infrarrojos
1 x	Herramienta enrollador alambre (Kwik Twist Tool DU301)
1 x	Extension MPX-MPX 20 cm
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	PowerBox Mobile Terminal
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Motor OS 46 AX II
1 x	Motor 1804 2400KV Qav 250 mini
1 x	Motor MVVS 2.0/1120
1 x	Power Pack SE Series JETCENTRAL
1 x	Fresa corte diamante Ø 1.0mm (bola)
2 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Turbo Prop KS
1 x	Soporte lija 25 mm
2 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Turbina LYNX 130
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Turbina RHINO 200 SE 20.4 Kg
1 x	Hélice 3x3
1 x	Perforador hélices 5/6,3/8/9
1 x	Motor OS FS 95 V4T
1 x	Bujia OS G5 gasolina
1 x	Motor OS MAX 120 AX
1 x	Motor brushless 1806 - 2300 Kv Cuadricóptero
1 x	Motor OS 15 LA
1 x	Arranque electrico BEE (old)
1 x	Base para servo
1 x	Colador RABBIT
1 x	Bujia Ceramica JETCENTRAL
1 x	HDT Jet Central
1 x	Motor OS 3820-1200 eléctrico
1 x	Turbina MAMMOTH 25.4 Kg
1 x	Mango para lima PERMAGRIT
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Lija cóncava-convexa con papel de 13 mm
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x	Turbina DRAGON 30 Kg
1 x	Funda plancha entelar STD
1 x	Set brocas PROXXON 0.5-3.2mm (10 pcs)
1 x	Mini-clip
1 x	Turbina RABBIT 100 SE 11 Kg
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Turbina HORNET 85 SE
1 x	Pincel Gr.5
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	Roller cutter 28 mm
1 x	Molde conector MPX 8 pines
1 x	Perforador hélices DA-85/100/120/150/200 y VM 60-210
1 x	Kwik link blanco largo (10 pcs)
1 x	Conector MR-60 (pareja)
1 x	Bateria LiPo GRE18 600 mAh 7.4v
1 x	Ball link M2 (10 pcs)
1 x	Tacometro HANGAR 9 digital
1 x	Gancho de lanzamiento fijo
1 x	Gancho de remolque hasta 4,5 m
1 x	Cable silicona 0,25 mm2 verde (100 m)
1 x	Cono Aluminio hélice fija 50 mm diámetro / eje 6,0 mm
1 x	Cono Aluminio hélice fija 50 mm diámetro / eje 3,2 mm
1 x	Cable silicona 0,5 mm2 azul (50 m)
1 x	MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x	ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x	Rueda de acero Proxxon/Dremmel 2,35 mm
1 x	Kwik link micro (10 uds)
1 x	Adaptador de hélice 3 mm M5 (largo)
1 x	Kwik link metálico M3 (10 uds)
1 x	Pin 1,6 para terminales riostras M1,6 ⌀ (6 pcs)
1 x	Kwik link con brazo M5xM2,5xL30
1 x	Kwik link y brazo de nylon M4xM2,5xL30
1 x	linea kevlar Ø 0,5 mm para pull pull (3 m)
1 x	Bisagra pequeña con pin metalico (12 uds)
1 x	Bomba combustible manual gas/glow

32,998.06EUR