184.00EUR

ESC KAVAN PRO-160HV Opto 160 Amp
[KAV3231055]

Programmable brushless ESC for big high-voltage (HV) aircraft models. Continuous current 160A (peak 200A), 6–14 LiPo cells power, OPTO (galvanically isolated control and power electronics). Weight: 221g; dimensions: 110x50x33mm. Programmable microprocessor ESC for brushless, sensorless AC motors ("brushless, sensorless") for hobby and sport aircraft models with LiPo/Li-ion/LiFe battery power supply. It uses advanced optimized control technology to significantly improve throttle response and power stage control efficiency. The ESC design takes into account the high long-term load capacity and durability required in giant models when powered by a high cell count battery. The power section of the ESC is galvanically isolated from the control electronics to provide high immunity to interference at high operating currents and high supply voltages. The ESC is not equipped with a BEC for the receiver and servos. A special KAVAN PRO LED programming card, which is supplied separately, is used to easily set up the ESC.
DESCRIPTION AND FUNCTIONS OF THE ESC
The ESC features a high-performance 32-bit ARM M4 microprocessor with a clock frequency of up to 72 MHz; it is compatible with most brushless motors.
Suitable for the vast majority of aircraft brushless motors powered by 6-14S LiPo/Li-ion/LiFe batteries.
Special power stabilizer for microprocessor for high interference immunity and reduced risk of loss of control.
Optimized control technology significantly improves throttle response and power stage control efficiency and reeduces ESC temperature.
Galvanically isolated power part by optoelectronic component.
Normal/Soft/Very Soft start-up modes are suitable for normal propeller aircraft and models with EDF.
Easy programming and setup using the transmitter or the KAVAN PRO LED programming card.
A special programming cable for connecting the ESC to the LED programming card allows the user to program the ESC anytime and anywhere (see the KAVAN PRO LED programming card manual for details).
Normal/Proportional/Reversal brake modes (especially reversal mode) can effectively shorten the range after landing.
A number of protection functions: start-up protection, thermal protection of the ESC, thermal protection of the capacitors, overload protection, overcurrent protection, abnormal supply voltage protection and control signal loss protection effectively extend the life of the ESC.
Calibrate the throttle range to perfectly match the control signal from your RC kit.

PROGRAMMABLE FUNCTIONS
Brake Type Brake off, normal brake (with braking intensity adjustable in 7 levels), proportional brake (controlled by the throttle control: 0-20% of throttle control deflection corresponds to 100-0% brake, 20-100% of control deflection corresponds to 0-100% throttle), reversing (allows to switch on the reversing of the motor running by another channel with a switch).
Brake Force: The braking intensity is adjustable from Level 1 to Level 7 for "Normal Brake" mode.
Cutoff type: Soft Cutoff: the contESCroller will gradually reduce power to 50% of full power within 3 seconds after voltage protection is activated. Hard Cutoff.
Number of LiPo cells: We recommend setting manually for 100% reliable voltage protection function. The ESC will automatically calculate the number of cells of the connected battery according to the "3.7 V per cell" rule if you select automatic detection.
Cutoff Voltage: The threshold level of the voltage protection is adjustable from 2.8 to 3.8 V/cell; the protection can also be switched off completely.
Start-up Mode: Normal start-up (instant start-up), Soft start-up (with slow start for motors with large propellers, gearbox or smaller EDF), Very soft start-up (with very slow start for motors with large propellers, gearbox or EDF from 90 mm).
Timming: Adjustable from 0-30°.
Motor direction: CW/CCW
DEO Freewheeling: This feature can be turned on or off; it can provide better linearity or smoother throttle response.

PROTECTIVE FUNCTIONS OF THE ESC
Start-up protection The ESC measures the motor speed during start-up. If the speed stops increasing or the increase is not stable, the ESC evaluates this as an incorrect start-up. If the throttle is at less than 15% at this point, the ESC will automatically attempt to restart the motor; if the throttle is at more than 15%, you must pull the throttle control all the way down to restart the motor.
Thermal protection of the ESC: The motor will "stall" if the ESC temperature exceeds 110°C, indicating that thermal protection has been activated. If the throttle control is pulled back below 60% at that point, the "stutter" will disappear and the ESC will deliver power appropriate to the throttle position. If you move the throttle above 60%, the "stutter" will reappear. The temperature of the ESC must not exceed 70°C when switching on, otherwise the engine cannot be started.
Signal loss protection The ESC will immediately shut down the motor if the signal is absent for 0.25 s to prevent even more damage and risks from a rapidly rotating rotor or propeller. Once a normal signal is received, the ESC resumes normal operation.
Overload protection The ESC switches off the motor or restarts automatically when its load suddenly increases to a very high value.
Overcurrent protection: The ESC immediately switches off the motor if the peak current draw exceeds the maximum permitted value; it then resumes normal operation. If the current draw still exceeds the maximum permitted value, the motor is switched off completely.
NOTE:The throttle cable of the ESC is the two-wire lead (white + black wire), the programming cable is the 3-wire lead (white + red + black wire). Connect ONLY the throttle cable to your receiver.
Tip: When the first time the regulator is switched on, first calibrate the throttle range according to the instructions. Only then can the ESC be used and other parameters set using the transmitter or the KAVAN PRO LED programming card.
Use: Airplane,helicopter
Type: brushless ; Current rate [A]: 160 ; Max. peak current [A]: 200 ; LiXX cells: 6 - 14 ; Lenght [mm]: 110 ; Width [mm]: 50 ; Height [mm]: 33 ; Weight [g]: 221 ; Regulation type: one-way ; Brzda: Yes ; Sensor input: No ; Programmable: Yes Used for Aeroplane,Helicopter Type AC Constant current [A] 160
Max. peak current [A] 200
LiXX cells 6 - 14
Length [mm] 110
Width [mm] 50
Height [mm] 33
Weight [g] 221
Control one-way
Brake Yes
Sensor imputs No
Programmable Yes

under request

Reviews

Quick Find

Shopping Cart

1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Balsa panel 10x100x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
2 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Bungee HLG Premium
1 x	Vasa model Catapult
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Threaded coupler M2 (10 uds)
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
2 x	Ball link Aluminio M3 (2 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Threaded coupler M3 (10 uds)
2 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
2 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Towing hook
1 x	Adjustable launching hook
1 x	Towing hook
1 x	Towing hook <3m
1 x	Tow hook for tug
1 x	LOWER TOW HOOK
1 x	Canopy Latch
2 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Screw-lock connector Ø 2 mm (2 uds)
2 x	SUS wire 3m (nylon coated)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
2 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	One touch canopy lock
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Oracover Verde 2 m
1 x	Oracover Azul Cielo 2 m
1 x	Ply-Span 450x600/13g White
1 x	Oracover Black 2 m
1 x	Oracover CHROME 2m
1 x	Oratex Red Fokker 10 m
2 x	MYLAR film A350 (1000x500 mm)
1 x	Oracover CARBON Metalic 1 m
2 x	Oracover Black 10 m
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Ply-Span 450x600/13g Orange
2 x	Oracover Yellow CUB 10 m
1 x	Oratex Antik 2m
1 x	ORACOVER Ferrari red (2 m)
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oracover Azul 2 m
2 x	Oracover Brown 2 m
1 x	Ply-Span 450x600/13g Blue
1 x	Oracover Orange 2 m
1 x	Oracover White 2 m
1 x	ORACOVER transparent Yellow (10 m)
1 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Concave-Convex sandpaper file 13 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	3l Smoke oil
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Hot Glue Stick RED
1 x	Oil FUCHS 1 liter
1 x	BALSA triangular 10x10x1000 mm
3 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
3 x	Metal ball clevis M3 (10 uds)
2 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
2 x	Pulley brass 12/2 (2 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
2 x	Oratex Natural White 2m
1 x	Oracover GREY Seafire Sea 2m
1 x	Oratex White 2m
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	SIG Coverall 1.2x4.5 m
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
2 x	41x5,5 mm wires output (2 pcs)
2 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
2 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Allen wheel collar M3x3
1 x	Clip mini fixing for wing (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Control for forward wheel (MINI)
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
1 x	Tip wing protector 30x10 (2 pcs)
2 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	11 mm Rubber pads (14 pcs)
1 x	Ciano KAVAN Super Thin 20g
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x	90 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
2 x	Cable grommet Ø 5 mm (4 uds)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Allen wheel collar M4x6
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	28x5 mm wires output (2 pcs)
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	Cockpit aluminium closing 4.7g
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	Pushrod octagone 4/3
1 x	38x4,5 mm wires output (2 pcs)
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	Allen wheel collar M4x4
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x	Oracover Green10 m
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Micro clevis (10 uds)
1 x	Battery LiFe -1450/25C-3S 9.9V
1 x	Jet Pipe for A-10 Skymaster (set 2 pcs)
1 x	Fod Guard 67x32 mm
1 x	Turbina KINGTECH K65 G4+
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Turbina JetsMunt VT98 NG
2 x	Metal clevis M3 (10 uds)
1 x	Pulley brass 10/2 (2 pcs)
1 x	Kwik link with arm M5xM2,5xL30
1 x	Black large kwik link (10 pcs)
1 x	Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	Kwik link with arm M3xM2xL24
1 x	Metal clevis M2 (10 uds)
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Turbina JetsMunt M210TS
1 x	Micro clevis (10 uds)
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	Metal clevis M2,5 (10 uds)
1 x	Small kwik link (10 pcs)
1 x	FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
1 x	White large kwik link (10 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Turbina JetsMunt M166TS
1 x	Rubber bushing with bracket "B" type (2 pcs)
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Bomba KP500V Kingtech
1 x	Bluetooth Adapter JET CENTRAL
1 x	Battery LiFe -2100/25C-3S 9.9V
1 x	Turbine KINGTECH K100 G4
2 x	FOD Screen K140G/K180G/K210G
1 x	Telemetry JETI
1 x	Turbine KINGTECH K85 G4
1 x	Turbina KINGTECH K55G4
1 x	Turbina KINGTECH K70G4
1 x	Jet Pipe for ASPIRE 2m JMF
1 x	Fod Guard 94x32 mm
1 x	Battery LiFe -3000/25C-3S 9.9V
1 x	GSU Kingtech
1 x	Variable Flow Smoke Pump System
1 x	Kerostarter K30G
1 x	KingTech K100TP G4+ Turboprop
1 x	Burner Plug K30/ K45
1 x	Jet Pipe 160N-250N (120/130 mm)
1 x	Scale exhaust K45TP
1 x	Jet Pipe 40N-80N (200 mm)
1 x	Turbina KINGTECH K142 G4M
1 x	Fod Guard 94x34 mm
1 x	Turbine KingTech K30G Restart
1 x	KingTech Turbineoil 10L
1 x	Jet Pipe for ULTIMATUM 2m
1 x	Turbina KINGTECH K180 G4+
1 x	JETCAT ADITIVO ANTIESTATIC 120ml
1 x	Battery LiFe -3800/25C-3S 9.9V
1 x	Pipe Jet REVEL titanio/aluminio
1 x	KingTech T-Modul 5 in 1 Telemetry
1 x	Exhaust K45TP
1 x	KingTech Turbineoil 1L
1 x	KingTech Turbineoil 5L
1 x	Pendulun "Special" to tank 60g
1 x	Fod Guard 73x32 mm
1 x	Scale exhaust K100TP
1 x	Balsa panel 2.5x100x1000 mm
1 x	Steering arm 16 mm Ø 3 mm
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Snap for floding prop for 2 mm axi
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	55 mm aluminium spinner (Kavan)
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	ESC ALPHA 60A HV
1 x	USBCOM 5i
1 x	45 mm aluminium spinner (Kavan)
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	Blade holder metal LAMA
1 x	Spinner 82mm Black ventilado
1 x	Round Rod 1.0x3.5 cm
1 x	50 mm aluminium spinner (Kavan)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Superlight deluxe wheel 62 mm (2 pcs)
1 x	Lipo KAVAN 2200 mAh 11.1v 40/80C
1 x
1 x	SAVAGE Max Red 1080 mm
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	Cable coupler M2,5 (2 pcs)
1 x	Cockpit plastic closing
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Oratex Natural White 20m
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	HBC 10035-3 32-Bit
1 x	KAVAN Threadlocker - Blue 10ml
1 x	Surface Indicator Gauge Small
1 x	SlowFlyer control horn (3 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Extension 90 cm (Futaba)
1 x	Maxi Fuel Filter
1 x	Threaded coupler M2,5 (10 pcs)
1 x	Superlight standard wheel 100 mm (2 pcs)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Epoxy 5min KAVAN 2x 100g
1 x	Spinner 60 mm White (Kavan)
1 x	GRE-18 RTR Crawler 1:18 Orange
1 x	ESC KAVAN R-80SB SBEC 80A
1 x	Extension 30 cm (Futaba)
1 x	Superlight deluxe wheel 50 mm (2 pcs)

37,711.27EUR