Top » Catalog » Kavan » KAV201280MG

99.90EUR

Servo GO-1280 MG 40 kg.cm 0.085s/60º
[KAV201280MG]


Very high torque/high speed programmable digital standard 79g brushless servo with hardened steel gear and triple BB-ed output shaft. Works great in 1:8 or 1:10 off-road RC cars etc. All-aluminium waterproof and dustproof case (meeting IP67 standard requirements) for perfect cooling under high load and protection from the rough environment. The magnetic encoder instead of the regular mechanical potentiometer adds to the uncompromised precision and reliability.

GO-1280MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
Reverse: Reverses the servo movement direction. Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio. SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo. Wide input voltage range 4.8-7.4 V (nominal).
25T/5.92 mm output shaft.

Servo dimensions Standard
Servo type Digital
Programmable Yes
Magnetic system Yes
Thrust at 4.8V [kg/cm] 27
Thrust at 6.0V [kg/cm] 31
Thrust at 7.4V [kg/cm] 36
Thrust at 8.4V [kg/cm] 40
Speed at 4.8V [s/60st.] 0.14
Speed at 6.0V [s/60st.] 0.12
Speed at 7.4V [s/60st.] 0.1
Speed at 8.4V [s/60st.] 0.085
Servo gears Metal
Ball bearings 3×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 40
Width [mm] 20
Height [mm] 37.5
Weight [g] 79
Intended for On-road cars,Off-road cars,Boats
Water resistance Waterproof


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Cap Hispano Aviación
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Joint with bearing M2 22x5,5
1 x BALSA trip 6.0x6.0x1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
2 x Sun Cover PC 21 XXL (JMB Jets)
1 x Carbon fiber rod 20 mmx1000 mm
1 x Locking cable tie 3.2x142 (uds)
2 x Trailing edge BALSA 35x8x1000 mm
1 x Lock washer 2.7 mm (20 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
2 x BALSA trip 5.0x5.0x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Locking cable tie 2.5x100 (uds)
2 x Aluminium wide washer M4 Gold (4 pcs)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
2 x Lock washer 4.3 mm (20 pcs)
1 x Carbon fiber rod 1.0 mm x 1000 mm
2 x Towing hook
1 x Lock washer 2.2 mm (20 pcs)
1 x Screwdriver for Torx® TX6
1 x Crimping tool
1 x Horn 6/20 with M3 Bearing
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Red smoke canister 140 g
1 x Digital precision scale up to 2000 g
1 x Starter EM Gear Power 250
1 x 2,5x60 mm allen screwdriver
1 x Starter 12v (Max 180 and 30ccm)
2 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Parachute expulsion foam
1 x ABS Strip 1.0x3.0x1000 mm
1 x Crimping tool
1 x Pilot "Duke" Legends Series (Slimline)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x LH long black aluminium horn L31xH30 (2pcs)
2 x Strip 2,5x1,25x330 mm
1 x Oracover CARBON Metalic 1 m
1 x 1/12 Pilot "Fighter"
1 x ABS Strip 1.5x2.0x1000 mm
1 x Glases Innovation Plus
1 x Hexagonal ball head 2.0 x 50 mm
2 x PPM Encoder Module
2 x Slave-cable USB Easy Sim
1 x FA27.2×8.9 Prop-2PCS/PAIR
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x Landing gear Rocket 400
2 x La Capitania di Venetia 1:50
1 x Spinner NUT M5
1 x Blue Aluminium lock nut M3 (4 pcs)
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x BALSA trip 2.0x2.0x1000 mm
1 x Aluminium wide washer M3 red (4 pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Nylon gear block Ø 4 mm (2 uds)
1 x Nylon gear block Ø 3 mm (2 uds)
1 x Landing gear clamp for Ø 4 mm (4 uds)
1 x Concave-Convex sandpaper file 13 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Aero shocks
1 x Quick hose connector 4-4 mm
1 x Landing gear clamp for Ø 3 mm (4 uds)
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Short adjustable control horn 3x24
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Strip ABS 2.0x10.0x1000 mm
1 x Horn DU-BRO 1/2 (2 pcs)
1 x ABS Strip 1.5x8.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Horn 13,5x16 mm (2 pcs)
1 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x 6 mm red aluminium threaded horn with patella
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Glases Flitemaster
1 x Glases Nimbus "Black"
1 x Horn 6/35 with M3 Bearing
1 x Aluminium wide washer M3 gold (4 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Blind nut M5 (10 pcs)
2 x Hexagonal Nut M2.5 (10 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Pine wood slat 3.0x10.0x1000 mm
2 x BALSA trip 4.0x4.0x1000 mm
1 x Suncover 100cc Red
1 x Adjustable launching hook
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Blue Aluminium lock nut M2 (4 pcs)
1 x Lock nut M2 (20 pcs)
1 x M3 black washers (4 pcs)
1 x Beech dowels 4.0 x 1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x BALSA triangular 10x10x1000 mm
1 x Blind nut M6 (4 pcs)
1 x Blind nut M4 (10 pcs)
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Blind nut M4 (4 pcs)
1 x BALSA triangular 15x15x1000 mm
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Floating M3 washer pad (36 pcs)
1 x Blind nut M5 (4 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Lock nut M4 (10 pcs)
1 x Lock nut aluminium M3 (4 pcs)
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x BALSA triangular 6x6x1000 mm
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Lock nut M5 (10 pcs)
1 x Beech dowels 2.0 x 1000 mm
1 x 12 mm floating pad (49 pcs)
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Lock nut M3 (10 pcs)
1 x Floating M4 washer pad (36 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x BALSA trip 2.0x10.0x1000 mm
1 x Hexagonal Nut M4 (20 pcs)
1 x Towing hook
1 x Fixed launching hook
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Beech dowels 3.0 x 1000 mm
1 x Blind nut M3 (4 pcs)
1 x 15 mm floating pad (30 pcs)
2 x Hexagonal Nut M4 (10 pcs)
1 x Blind nut M2 (10 pcs)
1 x Lock nut aluminium M2 (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Beech dowels 10 mm x 1000 mm
1 x Blind nut M6 (4 pcs)
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
2 x Aluminium wide washer M3 blue (4 pcs)
1 x Towing hook <3m
2 x Lock nut M5 (20 pcs)
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x Flat washer 2.2 mm (20 pcs)
2 x Flat washer 1.7 mm (20 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Landing gear strap large (4 uds)
1 x Quick hose connector 3-3 mm
1 x Charger SKY RC e680
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Festo Adaptor Tygon Large/4mm
1 x Dual Sequencer Gear and Canopy
2 x Birch plywood plate 600x300x1.2 mm
1 x Crawler GRE-24 RTR 1:24 Arena
1 x Ciano KAVAN Thick 20g
1 x A/C quality beech plywood 600x300x0.8 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x 10 mm aluminium spinner (Kavan)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x Landing gear strap medium (4 uds)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Blade holder metal LAMA
1 x Body for landing gear Ø 3 mm
1 x Ciano KAVAN Super Thin 20g
1 x Fail Safe air retract
1 x 
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Battery LiPo GRE18 600 mAh 7.4v
1 x 25 mm Sandpaper file
1 x 40 mm air cylinder
1 x Birch plywood plate 600x300x2.5 mm
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x Check valve quick hose connector 4-4 mm
1 x Hose stopper 4 mm
1 x Festo 6mm Tubing Holder (10 uds)
1 x Festo 4mm Tubing Holder (10 uds)
1 x BETA 1400 ARF Red
1 x 50 mm aluminium spinner (Kavan)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened threaded rod M2-1m
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
2 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
2 x Brass rod Ø 0.5 mm x 1000 mm
1 x Yellow smoke canister 140 g
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Long horn 50x26
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Round Rod 1,5x1000 mm
1 x Extra long horn 60x30
1 x Brass control horn M3 short for wire (2 pcs)
2 x Horn with ball 55x40
1 x Strip ABS 2.0x3.0x1000 mm
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Micro control horn T2 Ø 1
1 x Micro control horn (2 pcs)
1 x Strip ABS 2.0x8.0x1000 mm
1 x Horn DUBRO 1/2A
1 x Small aluminium horn gold (2pcs)
1 x Cable with accesories
1 x Horn 16,5x20 mm (2 pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Glases Aspen
1 x Horn 20x28,5 mm (2 pcs)
1 x Propeller set 400 (2R+2L)
1 x Adaptadores carga 6s JST-XH
1 x EasyFLY Addon
2 x Interface Jack Adapter IKARUS
1 x RF9 Flight Simulator with Spektrum Controller
1 x SIMtransmitter 6 Mode 2
1 x Conector FUTABA Servo female (10 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Spinner NUT M8x1,25
1 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x Propeller POWER-PROP 16x10
1 x Propeller electric carbon 10.5x8
1 x Propeller hub spacer 8/5.5
1 x Parachute XTRALITE S
1 x Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x P 17×5.8 Prop-2PCS/PAIR
1 x Ball link Aluminio M3 (2 pcs)
1 x Conector FUTABA Servo male (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x X-RAY Micro QR
1 x L-39 Albatros Scale 1:4.75 1991 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Focke Wulf FW-190A-8 93" (2362 mm)
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x F4U CORSAIR 93", Electric retract Landing gear
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Balsa panel 2.0x100x1000 mm
1 x White silicone 0,25 mm² wire (25 m)
1 x BALSA leading edge 8x10x1000 mm
1 x Spring pin Ø 2 x 6 mm (10 pcs)
10,398.01EUR
Manufacturers
Manufacturer Info
Kavan
- Other products
Notifications
NotificationsNotify me of updates to Servo GO-1280 MG 40 kg.cm 0.085s/60º
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce