120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

1 x	75 mm spinner (Carbon Imitation)
2 x	Spinner 102 mm
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Hot Glue Stick BLACK
2 x
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Screwdriver for Torx® TX6
1 x	Ball Link Plier
1 x	Dust collector for mould cleaning
1 x	Digital precision scale up to 2000 g
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Copier 2x20 cm pcs
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Starter EM Gear Power 80
1 x	Screwdriver for Torx® TX8
1 x	1,5x50 mm allen screwdriver
1 x	Copier 5x20 cm pcs
1 x	Starter Sullivan-STAR 601
1 x	Z Bender - S Type Tool
2 x	Spinner 40 mm Black (Kavan)
1 x	Spinner 55 mm White (Kavan)
1 x	Ferrita 14x8x5.5 mm
1 x	Ferrita 17x10x6.5 mm
1 x	Spinner 50 mm White (Kavan)
1 x	Spinner 60 mm Black (Kavan)
1 x	Xplorer4 anemometro
1 x	100 mm rods set for direction control
1 x	45 mm rods set for direction control
1 x	100 mm rods + T patellas set for direction control
1 x	250 mm / 16 mm Airbrakes
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	140 mm rods set for direction control
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Allen wheel collar M3x3
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	28x5 mm wires output (2 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	11 mm Rubber pads (14 pcs)
2 x	Aluminun wheel collar 5 mm Ø (4 uds)
2 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Clip fixing for wing (2 pcs)
1 x	Allen wheel collar M4x4
1 x	Allen wheel collar M3x5
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Cierre cabina aluminio Ø5, I=16 mm
2 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Oracover ROYAL RED 2m
1 x	Oratex Natural White 2m
1 x	Oracover Azul 2 m
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	57 mm aluminium spinner.
1 x	Paramotor BackPack XXS 2
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Spinner 104x131 mm 115 g CFK-BS
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	"S" set for planes
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Carbon plate 350x150x3.0 mm
1 x	Support XT60 conector (2 pcs)
1 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x	Support ECU Xicoy X-45
1 x	Tube support Ø 6mm (10 pcs)
1 x	Vacuum pump 12 CFM
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cable grommet Ø 3.2 mm (4 uds)
2 x	Canopy Latch
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	90 mm rods + T patellas set for direction control
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x	Concave-Convex sandpaper file 13 mm
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	EC-Cutter
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Spinner 60 mm White (Kavan)
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	Cockpit metalic closing
1 x	Steering arm 16 mm Ø 3 mm
1 x	Screw-lock connector M2 (2 uds)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Cockpit aluminium closing
1 x	Control for forward wheel (MINI)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Blades 330mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Cockpit plastic closing
1 x	Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x	Landing gear frontal support 29x26x13,5
1 x	Cable tie mounts 4.3 (4 uds)
2 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Power supply NT 40 Amp.
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Bidule 55 V3 2460 mm
1 x
1 x	Ciano KAVAN Thin 20g
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Conector MT-60 (pair)
1 x	Ciano KAVAN Thick 20g
1 x	PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x	Bidule 111 3000 mm Canopy
1 x	Bidule 55 2460 mm Cabina
1 x	Bidule 111 3000 mm
1 x	SKY MASTER 3.000 mm ARF
1 x	CARBON CUB 15cc ARF 2280 mm
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	KAVAN CA Activator 150ml
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Glow Plug Clip 1.3 Ah
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	Fuel bottle 500 ccm
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Charger SKY RC e680

10,040.49EUR