Top » Catalog » Kavan » KAV201013MG

22.00EUR

Servo GO-1013 MG 3.8kg
[KAV201013MG]

High torque programmable digital pico servo 13g with titanium gear and input voltage range 4.8-6.0V, 2xBB, ideal for small model aircraft, 1:14-1:24 RC cars, 400-450 size helis etc. Torque 3.0kg.cm, speed 0.15s/60° at 4.8V, torque 3.8kg.cm, speed 0.12s/60° at 6.0V. Aluminium middle case heatsink for perfect cooling under high load.

High Torque programmable digital pico servo with titanium gear and double BB-ed output shaft for small RC model planes, 1:14-1:24 RC cars, 400-450 size helicopters etc. Plastic case with middle aluminium heatsink for perfect cooling under high load.
GO-1013MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
Reverse: Reverses the servo movement direction.
Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo.
Standard input voltage range 4.8-6.0 V (nominal).
25T/4.94 mm output shaft.
Servo dimensions Micro
Servo type Digital
Programmable Yes
Thrust at 4.8V [kg/cm] 3
Thrust at 6.0V [kg/cm] 3.8
Speed at 4.8V [s/60st.] 0.15
Speed at 6.0V [s/60st.] 0.12
Servo gears Titanium
Ball bearings 2×
High-voltage No
Power supply [V] 4.8 - 6
Length [mm] 22.8
Width [mm] 12
Height [mm] 29.4
Weight [g] 15
Intended for Aeroplanes,Helicopters,On-road cars,Off-road cars,Boats

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	Ball link M3 (10 pcs, flat ball)
3 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
2 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Joint with bearing M2,5 22x5,5
2 x	M2,5 5Diam short black ball link V2 (2 pcs)
2 x	M2 5Diam short black ball link V2 (2 pcs)
2 x	6 mm hexagonal ball link M3 (10 pcs)
2 x	Joint with bearing M2 22x5,5
2 x	M3/5 Diam metal short ball link V3 (2 pcs)
2 x	M3 Maxi ball link (2 uds)
2 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
3 x	Blue metalic ball link M3/3 azul (2 pcs)
2 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	6 mm ball link M3 (10 pcs)
2 x	Ball link M2,5 (10 pcs)
2 x	Joint with bearing M3 22x5,5
3 x	M3 INDUSTRIAL ball link (2 uds)
2 x	Ball link M3 RPA's-UAV's
3 x	M3 Maxi ball link (2 uds)
2 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
4 x	Ball link M1.6 (6 uds)
2 x	Ball link M2 (10 pcs)
1 x	Straightened threaded rod M2-1m
2 x	Straightened rod Ø 0.8 mm x 1000 mm
2 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
2 x	Ball Link M2 with Ball and Hardware, 10 pcs
2 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Cable coupler M2,5 (2 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Short ball link M2 (6 uds)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Ball link M3 (10 pcs)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Socket head ball link M3 (2 uds)
1 x	Cable coupler M2x66 (2 uds)
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Socket head ball link M3 (2 uds)
2 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
2 x	Couple M4 for wire (10 pcs)
3 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Long ball link M3 (6 uds)
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
2 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Ball link V1 Ø7 M4/3 (6 uds)
2 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Short ball link M3 (6 uds)
1 x	Ball link Aluminio M3 (2 pcs)
2 x	Pin hinge 39x20 mm (10 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	25 mm reinforced hinge
2 x	Indoor hinge with servo arm integraded
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Micro flex hinge (12 uds)
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	18 mm reinforced hinge
2 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	15 mm reinforced hinge
2 x	Pin hinge 26x11 mm (10 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	Large flex hinge (12 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Gates hinge aluminium (1 pcs)
1 x	Ferrita 17x10x6.5 mm
1 x	Adjustable launching hook
1 x	Towing hook
2 x	Fixed launching hook
1 x	Ferrita 14x8x5.5 mm
2 x	Ferrita con funda
2 x	LOWER TOW HOOK
3 x	Extension silicon 25 cm (Graupner)
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Slave-cable USB Easy Sim
1 x	Long ball link M2 (6 uds)
1 x	Suncover 100cc Red
1 x	Ball link M3 (6 uds)
1 x	120x60 mm SLH KOVO wheel
2 x	Straightened threaded rod M3 - 1m
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
3 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
2 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
2 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Cable coupler M3 (10 uds)
2 x	Brass rod Ø 0.5 mm x 1000 mm
2 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Threaded coupler M2 (10 uds)
1 x	Turnbuckle M1,6x17/27 (2pcs)
1 x	wire tensioner (black)
2 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Socket head long ball link M3 (2 uds)
2 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
2 x	Small kwik link (10 pcs)
2 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Balls 4 mm
1 x	Blade holder center
1 x	Socket head long ball link M3 (6 uds)
2 x	Adapter 4,0 mm M6
1 x	Allen wheel collar M4x4
1 x	Long ball link M1.6 (6 uds)
2 x	Turnbuckle M2,5x32/48 (2pcs)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
2 x	Prolongador S-Bus JR/JR 20cm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	200 mm extensión servo HITEC/JR
2 x	Cable silicona female batt. receptor 30 cm (Futaba)
2 x	Extension silicon 10 cm (Graupner)
1 x	Extension 30 cm (Futaba)
1 x	Extension silicon 30 cm male (Futaba)
1 x	Adaptadores carga 6s JST-XH
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Charger SKY RC e680
1 x	Round flex hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Extension silicon 75 cm (Graupner)
1 x	Extension 100 cm (Futaba)
2 x	Extension silicon 35 cm male (Futaba)
2 x	Extension 90 cm (Futaba)
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension silicon 75 cm (Futaba)
1 x	Pilot "Duke" Legends Series (Slimline)
2 x	Cabel "Y" 30 cm (graupner)
1 x	Extension lead 15 cm Multiplex
2 x	Extension silicon 30 cm female (Graupner)
1 x	Premium servo extension 25cm
2 x	Cabel "Y" 15 cm
1 x	Small pinned hinge (12 uds)
1 x	Conector MT-60 (pair)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	SKY RC T400Q Charger 4x100w
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Electric Fuel Pump 12v
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Ciano KAVAN Thick 20g
1 x	Small pinned hinge (6 uds)
2 x	Head runner
1 x	Fuselage Autogyro RAINBOW
2 x	Screws flush mount M2
1 x	Autogyro Cierva C30 Spain
1 x	Nut M2 securing
1 x	Head upper part
1 x	Bearing 3x6x2,5
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Metal clevis M2,5 (10 uds)
1 x	Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x	EXTRA NG 85" 2159mm yellow/blue
1 x	Micro clevis 0.8 mm(10 uds)
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	Micro clevis (10 uds)
2 x	Metal ball clevis M3 (10 uds)
1 x	EXTRA 300 78" V3 Orange/Blue
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Allen wheel collar M3x5
1 x	6 mm Prop Adapter M8
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	63 mm INO spinner (carbon imitation)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	500 ml sealer (DOPE)
1 x	Universal Colour Paste deep black 50 g
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x
1 x	Adapter 3,2 mm M8
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Propeller balancer
1 x	4 LiPo XH>EH adapter
1 x	1,2x1000 mm 2:1 black termoretract tube
2 x	SlowFlyer control horn (3 pcs)
1 x	Fiberglass motor-holder for electric motors
1 x	Extension silicon 100 cm (Graupner)
1 x	Debonder CA 20g
1 x	Propeller APC 10x10 Electric
1 x	Propeller APC 10x6 Electric Pusher
1 x	Propeller APC 11x4.7 SF
1 x	Blade holder center GFK 0,5 mm
1 x	Head lower part
1 x	Wire easy tensioner (silver)
1 x	Stainless steel 3 m Pull-Pull complet set (max 20 kg)
1 x	Turnbuckle M3 33x49 (2pcs)
2 x	wire tensioner (blue)
1 x	51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Angled clevis with threaded rod M3
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	wire tensioner (red)
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	AXI 2204 Multicopter
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	12.7 mm 2:1 black termoretract tube
1 x	2,5x60 mm allen screwdriver
1 x	Spinner 40 mm Black (Kavan)
1 x	Ø 38 mm fiberglass motor-holder for electric motors
1 x	BU 131 Jugmann Panel Instrum. frontal
1 x	PARTENAVIA 2020 mm ARF with Flaps
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Extension PVC 150 cm (Graupner)
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Extension 7.5 cm
1 x	Extension silicon 100 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Circlick securite
1 x	Extension silicon 25 cm (Futaba)
1 x	Extension silicon 30 cm male (Graupner)
1 x	Glow starter with charger 230v
1 x	Glow Plug Clip 1.3 Ah
1 x	Kavan Car 25% nitro 1l
1 x	Fuel bottle 500 ccm
1 x	Lipo KAVAN 2200 mAh 11.1v 30/60C
1 x	TMM 1210-3S heli
1 x	PSC 5
1 x	Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x	USBCOM 5i

9,197.26EUR