199.90EUR

BETA 1400 ARF Red
[KAV028085]

98% ready-made model of a motor glider of extruded polyolephine (EPO) foam with a brushless motor. Aileron, elevator and rudder control. A brushless motor, 20A ESC and 4 servos installed. Complete RTF set with 8-channel T8FB 2.4GHz FHSS RC set, 3S LiPo flight pack and quick charger.
The new KAVAN BETA 1400 keeps the familiar curves of the original BETA 1400 - yet she is a completely new model with slightly different dimensions, new wing section, new brushless motor with a folding propeller and finest accessories. New moulds and advanced EPO foam moulding technologies incorporated ensure all parts are much finer and precise.BETA 1400 - a tireless training workhorse - is a great choice for newcomers; she will help finding your way from initial prangs to the basics of aerobatic flying or thermal soaring without much fuss. Sunday flyers will find her to be a compact and easy-to-carry model for amazingly relaxing flying.
BETA 1400 is a great motor glider/elementary trainer powered by a brushless motor featuring aileron, elevator and rudder control. Rugged, yet light, airframe made of virtually unbreakable EPO foam makes her crash-proof - or at least easy to repair if something really serious happened.
The EPO foam fuselage comes with the C2814-1400 brushless motor in the pylon, 7x6” folding propeller, KAVAN R-20B ESC and GO-09 elevator and rudder servos installed. The detachable canopy is secured by a magnetic lock. The cooling air intake in the front of the pylon keeps the motor nice and cool. The two-piece EPO wing is supplied with two GO-09 aileron servos and their linkage installed. The wing halves are joined by a carbon tube joiner and secured by screws on the bottom side of the wing. The empennage is also of the EPO foam; elevator and rudder are controlled by a pair of wire push rods.
Preparing for the first flight is a breeze: glue the horizontal tailplane to the fuselage, join the wing haves and secure with two bolts, connect the receiver and flight pack - that’s all folks!
The model is supplied with the KAVAN/Radiolink 8-channel 2.4GHz FHSS (frequency hopping spread spectrum system) transmitter in stick mode 1 (throttle right). You can use it “straight-of-the-box” as a classic non-computer radio with digital trims and mechanic reverse switches for aileron, elevator, throttle and rudder channels (CH1-4). You can also connect it to a PC (via USB cable) or Android/iOS application (via Bluetooth) in order to use a number of useful program functions: adjustable servo throws, servo reverse, dual rates, exponential throws and many more. You will need 4 AA (pen cell) alkaline batteries or NiMH rechargeable batteries, 2-3S LiPo, LiFe of Li-ion battery pack for the transmitter (not supplied with the kit).
BETA 1400 RTF set contents the 11.1 V 1600 mAh LiPo flight pack. You can use 3S LiPo packs up to 2200 mAh as well.
BETA 1400 is suitable for beginners (under the guidance of a skilled pilot, do not try to start all alone, please!) - as well as any Sunday flyer or everybody who just wants to have some fun. The default set-up makes her a gently and docile model offering a good way how to learn and improve your flying skills step by step. You will learn the correct and timely way of the stick handling, coordinated turns using ailerons, elevator and rudder simultaneously...everything you will need with your next model - a large glider, an aerobatic plane, a (semi)scale model. The linkage design as well the transmitter with PC or Android/iOS application setting option make the adjustment easy: a beginner can start with small and safe servo throws, whilst an experienced pilot may go for large servo throws and some stunts. Loops, barrel rolls, stall turns are easy with your BETA 1400! There is a plenty of power for a good climbing rate; yet not too much to cause troubles for inexperienced pilots. BETA 1400 is capable of using even quite weak thermals soaring up there “for ages”.
The ARF set contents: EPO fuselage with the brushless motor, 20A ESC, 7x6" folding propeller, and 2 servos, EPO wing with 2 servos, EPO horizontal and vertical tailplane, carbon wing joiner and instruction manuaL
Wing span [mm] 1400
Length [mm] 966
Weight [g] 700 - 770
Wing surface [dm2] 24.5
Controlled functions S,V,K,M
Build difficulty S1
Operating difficulty P1,P2

under request

Reviews

Quick Find

Shopping Cart

1 x	Ventus 1:4 set of instruments
2 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x	30 cm DEANS female connector
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
4 x	Extension silicon 30 cm male (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
3 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Gold antispark 4 mm plug
1 x	2 mm female connector (2 pcs) with safety connector
2 x	XH female balance (3S) connector (2 pcs)
1 x	Premium servo extension 25cm
1 x	Conector BEC female (10 pcs)
1 x	Extension 90 cm (Futaba)
2 x	Connectors banna oro 3,5 mm (M/F)
2 x	Extension silicon 30 cm male (Graupner)
1 x	Banna gold connector 2,5 mm (M/F)
2 x	Extension silicon 10 cm (Graupner)
1 x	Circlick securite
1 x	XH female balance (2S) connector (2 pcs)
1 x	Conector Servo female 4 pines
1 x	Connectors DEANS (T)
2 x	Extension 15 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension 7.5 cm
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Extension silicon 30 cm female (Futaba)
2 x	Extension 30 cm (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
2 x	Connectors DEANS 4 pins (1 pair)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
2 x	Prolongador S-Bus JR/JR 10cm
3 x	Extension PVC 150 cm (Graupner)
1 x	Premium servo extension 100cm
1 x	Optotronix Aurora Plug
1 x	Premium servo extension 50cm
3 x	Extension silicon 35 cm male (Futaba)
2 x	Extension silicon 30 cm female (Graupner)
2 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
3 x	Extension 100 cm (Futaba)
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	XH male balance (5S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
2 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 12.0x10.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
2 x	ABS tube 5.0x3.0x1000 mm
2 x	ABS tube 6.0x5.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	ABS tube 4.0x3.0x1000 mm
2 x	ABS tube 9.0x7.0x1000 mm
1 x	Stickers-digit for marking
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x
1 x	Towing hook <3m
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Fixed launching hook
3 x	Profile ABS Square 2 x 1000 mm
2 x	T-Connector 4.0 mm x 1000 mm
3 x	White smoke bombs AX-60 (5 pcs)
1 x	Smoke set "M"
2 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Parachute expulsion foam
1 x	Black smoke bombs AX-60 (5 pcs)
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Smoke set "Glider"
1 x	Red smoke canister 65 g
3 x	U Profile ABS 2,0x4,0x1000 mm
2 x	White smoke canister 100 g
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	"S" set for boats
2 x	3l Smoke oil
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	ABS angle 1.5x1.5x1000 mm
1 x	Parachutist
2 x	Ventral support for AX-18/AX-60
2 x	L-Connector 1.5 mm x 1000 mm
3 x	ABS angle 2,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Yellow smoke canister 140 g
2 x	Profile ABS half cane 3x1000 mm
2 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	1/6 Pilot "Tony"
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Dust collector for mould cleaning
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Extension silicon 50 cm (Futaba)
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 25 cm (Graupner)
2 x	Extension silicon 75 cm (Futaba)
2 x	MPX Support (2 pcs)
1 x	Extension silicon 75 cm (Graupner)
1 x	ABS tube 3.0x1.0x1000 mm
2 x	Bag connector 2 mm
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
2 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Tube support Ø 6mm (10 pcs)
1 x	ABS tube 8.0x6.0x1000 mm
3 x	Connector CAN 15
1 x	Conector JR Servo female (50 pcs)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Fiberglass tube 6/4x1000mm
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Futaba Female 40 cm extension
2 x	Motor A2212/13T
1 x	Extension silicon 10 cm (Futaba)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x	Extension silicon 100 cm (Graupner)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	ABS angle 3,0x3,0x1000 mm
2 x	Flat Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Rubber profile 8-2 mm 2M
1 x	L-Connector 1.0 mm x 1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	B4-0 rocket charges (6 pcs)
2 x	Profile ABS Square 1 x 1000 mm
1 x	Rubber profile 10-2 mm 2M
2 x	Profile ABS half cane 4x1000 mm
1 x	"M" set
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	6,4x1000 mm 2:1 green termoretract tube
2 x	ABS I Strip 20x10x1000 mm
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Round Rod 2,0x1000 mm
2 x	EasyFLY Addon
1 x	PIX Hawk with accesories
1 x	Remote electric ignition system
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Yellow smoke canister 100 g
1 x	Green smoke canister 140 g
1 x	Profile ABS Square 4 x 1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Red smoke bombs AX-60 (5 pcs)
2 x	Profile ABS half cane 2.5x1000 mm
1 x	Carbon plate 350x150x1.0 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Initior Transmitter FTX2 Wireless
1 x	Rubber profile 6-2 mm 2M
1 x	ABS angle 4,0x4,0x1000 mm
1 x	White smoke canister 140 g
2 x	PCARD Wireless System
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Green smoke canister 65 g
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Electric rocket starters (6 pcs)
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Legs + electric brakes for Viper Jet 90
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x	Bearing block for noseleg landing gear
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Foreman, scale 1:32
1 x	Propeller hub spacer 8/5.5
1 x	12 mm portholes (10 pcs)
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Covered closure or fairings
1 x	Premium servo extension 75cm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Extension silicon 25 cm (Futaba)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Futaba male 40 cm extension
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	SUS wire 3m (nylon coated)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	14 mm portholes (10 pcs)
1 x	29,0 mm propeller (rigth propeller)
1 x	10 mm Prop Adapter M12
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	3 mm Leader (L 100 mm)
1 x	3.2 mm Prop Adapter M8
1 x	31,0 mm propeller (rigth propeller)
2 x	10x7 tree blades propeller
1 x	2,3 mm Prop Adapter M6
1 x	14 mm Portholes for screws (10 pcs)
1 x	11x7 tree blades propeller
1 x	2.3 mm Adapter for 30 mm spinners
2 x	3.17 mm Prop Adapter CN-Spinner
1 x	16x10 tree blades propeller Master Airscrew
1 x	3,2 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	15x7 tree blades propeller
2 x	12x8 tree blades propeller
2 x	12 mm mast holder
1 x	290 mm M4/4 mm Prop shaft
1 x	250 mm / 16 mm Airbrakes
1 x	15x7 tree blades propeller LEFT
1 x	12x6 tree blades propeller
1 x	MPX Support
1 x	Protector Connector MPX (1 pair)
1 x	Red 4 mm connector holder
1 x	MPX housing with flange (4 pcs)
2 x	Soporte carbono MR30 (2 pcs)
1 x	MPX screwable clips (5 pcs)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	Servo Connector Brackets (10 pcs)
1 x	Contacto macho pin conector (10 pcs)
1 x	XT-60 connector (female)
1 x	Mounting frame MPX male connector
2 x	Wing connector 8pin with pin strip, plug & socket
1 x	Extension MPX-MPX 20 cm
1 x	Red 3m5 mm connector holder
1 x	Kontronik connector (10 connectors, 5 pairs)
1 x	MPX PCB "4 Pins", 5 pieces
1 x	MPX screwable clips (4 pcs)
1 x	XT60 Connector with Holder Male 2pcs
1 x	XT-60 connector (male)
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	PIN Connector female (100 pcs)
1 x	Soldering PCBs 8pin, 5 pieces
1 x	Autogyro Cierva C30 Spain
1 x	Bearing housing
1 x	ABS Strip 1.5x3.0x1000 mm
2 x	Round Rod 4,0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Head lower part New
1 x	Soporte filtro FESTO (4 pcs)
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	XH female balance (9S) connector (2 pcs)
1 x	Support Pitot JETI
1 x	Complet landing gear
1 x	Glases Stratus
1 x	Cierva C30 simulated motor
1 x	LA500 housing-upper cyclic
1 x	Ball joint long
1 x	ABS tube 8.0x7.0x1000 mm
1 x	LA500 nose
1 x	XH female balance (8S) connector (2 pcs)
1 x	Cierva C30 Elevator
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	LA500 freewheel bearing
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	XH male balance (3S) connector (2 pcs)
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Blue smoke canister 140 g
1 x	Extension lead 15 cm Multiplex
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	Slave-cable USB Easy Sim
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	LightBox SR
1 x	ED Position Lights wireless (Set of 3)
1 x	LED blink wire flashing (blue - 2pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Initior Receiver FRX2 Wireless
1 x	AX-60 starters (5 pcs)
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 1,25x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Strip 1,5x1,5x330 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Motor Scorpion HKIII 4035-560 Kv
1 x	Anntena Panel 5,8 GHz - 14 dBi
1 x	Tren de cola carbono 50-70cc
1 x	Ciano KAVAN Medium 20g
1 x	Propeller CFK 17x18
1 x	Propeller CFK 15x7

6,118.25EUR