Inicio » Catálogo » Kavan » KAV201280MG

99.90EUR

Servo GO-1280 MG 40 kg.cm 0.085s/60º
[KAV201280MG]

Very high torque/high speed programmable digital standard 79g brushless servo with hardened steel gear and triple BB-ed output shaft. Works great in 1:8 or 1:10 off-road RC cars etc. All-aluminium waterproof and dustproof case (meeting IP67 standard requirements) for perfect cooling under high load and protection from the rough environment. The magnetic encoder instead of the regular mechanical potentiometer adds to the uncompromised precision and reliability.

GO-1280MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
Reverse: Reverses the servo movement direction. Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio. SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo. Wide input voltage range 4.8-7.4 V (nominal).
25T/5.92 mm output shaft.

Servo dimensions Standard
Servo type Digital
Programmable Yes
Magnetic system Yes
Thrust at 4.8V [kg/cm] 27
Thrust at 6.0V [kg/cm] 31
Thrust at 7.4V [kg/cm] 36
Thrust at 8.4V [kg/cm] 40
Speed at 4.8V [s/60st.] 0.14
Speed at 6.0V [s/60st.] 0.12
Speed at 7.4V [s/60st.] 0.1
Speed at 8.4V [s/60st.] 0.085
Servo gears Metal
Ball bearings 3×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 40
Width [mm] 20
Height [mm] 37.5
Weight [g] 79
Intended for On-road cars,Off-road cars,Boats
Water resistance Waterproof

temporalmente fuera de stock

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Acoplador para cable M4 (10 pcs)
1 x	Kwik link con brazo M3xM2xL24
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
2 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link negro largo (10 pcs)
2 x	Kwik link metálico con bola M3 (10 uds)
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
2 x	Ball link aluminio M3 V1 azul (10 pcs)
2 x	Kwik link AL M4 con Clip (2 pcs)
2 x	Kwik link y brazo de nylon M4xM2,5xL30
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
2 x	Kwik link con brazo M5xM2,5xL30
1 x	Kwik link metálico M2 (10 uds)
1 x	Clevis con trasmisión M3
1 x	Terminales de mando o arriostrado aluminio rojo M3, 4 mm (4 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Kwik link metálico M2,5 (10 uds)
2 x	Terminales riostras M2,5 (2 pcs)
1 x	Terminales riostras M3 (10 uds)
2 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Terminales riostras M2 (10 uds)
1 x	Terminales riostras M6x66 (2 uds)
2 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
2 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Piloto 1/4 "Heidi"
1 x	Piloto 1/6 "Garry"
1 x	Piloto "Duke" Legends Series(Slimline)
2 x	Piloto civil "Pamela" tamaño 9cm (Slimline)
1 x	Piloto 1/6 "John"
2 x	Piloto 1/6 "Tony"
2 x	Piloto 1/12 "Cougar"
2 x	Piloto 1/10 "Jack"
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Piloto 1/12 "Tom"
1 x	Piloto 1/10 "Jimmy"
1 x	Piloto JET 1:3,5
1 x	Piloto civil "Gramps" tamaño 9cm (Slimline)
1 x	Piloto "Anthony" (Slimline)
1 x	Piloto civil "Curt" tamaño 9cm (Slimline)
1 x	Piloto civil "Joe" tamaño 9cm (Slimline)
1 x	Piloto civil "G-Man" tamaño 9cm (Slimline)
2 x	Piloto militar "Fly Boy" tamaño 9cm (Slimline)
3 x	Piloto "Goose" (Slimline)
2 x	Liston ABS 1,5x8,0x1000 mm
1 x	Polea de bronce 10/2 (2 pcs)
1 x	Varilla ABS 2,0x1000 mm
1 x	Varilla ABS 1,0x1000 mm
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Varilla ABS 1,25x1000 mm
1 x	Liston ABS 2.0x3.0x1000 mm
1 x	Pîn 3,0 terminales riostras M3,0 ⌀ (6 pcs)
1 x	Pin Ø 1,6 mm para Kwik link MPJ2150/2157 (6 pcs)
1 x	Pin 2,0 para terminales riostras M2,0 ⌀ (6 pcs)
1 x	Pasacables con soporte GFK "A" (2 pcs)
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Kwik link micro 0.8mm (10 uds)
1 x	Liston ABS I 20x10x1000 mm
1 x	Liston ABS I 3,5x1,75x330 mm
1 x	Pin 2,5 terminales riostras M2,5 ⌀ (6 pcs)
1 x	Kwik link pequeño (10 pcs)
1 x	Varilla ABS 1,5x1000 mm
1 x	Kwik link metálico M3 (10 uds)
1 x	Varilla ABS 3,0x1000 mm
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	Pasacables con soporte GFK "B" (2 pcs)
1 x	Conjunto de mandos arriostrados
1 x	Acople ALU M3 Ø 4 (2 uds)
2 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Horn aluminio roscado 6 mm con rótula
3 x	Horn aluminio pequeño azul (2pcs)
1 x	Horn aluminio pequeño rojo (2pcs)
2 x	Horn corto de latón M4 para cable (10 pcs)
3 x	Horn 13,5x16 mm (2 pcs)
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Horn con ball 55x40
3 x	Horn aluminio LH largo L31xH30 (2pcs)
2 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Horn corto de latón M4 para cable (4 pcs)
2 x	Horn de mando 5/20 con rótula M2
1 x	Horn de mando 5/10 con rótula M2
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
3 x	Horn de mando 6/35 con rótula M3
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Horn de control para SlowFlyer (3 pcs)
1 x	Ferrita 27x14x7 mm
1 x	Alicate para hacer "Z"
1 x	Set cintas unión paracaídas 145 cm
1 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Tubo ABS 7,0x6,0x1000 mm
1 x	Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
1 x	Varilla carbono plana 1000x3.0x0.5 mm
1 x	Cable PVC 2 x 0.25 mm2 (5 m) rojo-negro
1 x	Cable silicona 0,25 mm2 blanco (100 m)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Piloto JAN 1/4 Veleros
1 x	Piloto WWII US Navy Pacific 12" Sclae 1/6-1/5
1 x	Piloto jet 130 mm
3 x	Piloto militar "Kamikaze" tamaño 9cm (Slimline)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Soporte bomba/flitro Xicoy X45
1 x	Ball link M2 (10 pcs)
1 x	Terminales riostras M3x16 (2 uds)
1 x	Soporte conector MPX empotrado (6 pcs)
1 x	Terminales riostras M2 (10 uds)
1 x	Ball link aluminio M3 V1 (10 pcs)
2 x	Cable con accesorios
1 x	Cono plástico blanco hélice fija 51 mm diámetro / eje 4,0 mm
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Varilla ABS 2,5x1000 mm
1 x	Piloto 1/12 "Langley"
1 x	Bisagra pin 26x11 mm (10 uds)
1 x	Conector universal carga chispometro
1 x	Cono INO de 57 mm (Imitacion carbono)
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Piloto 1/4 "Mike"
1 x	Horn largo de latón M2 para cable (2 pcs)
1 x	Horn de mando largo ajustable aluminio con rodamiento 2,8x24
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Horn mando DU-BRO 1/2 (2 pcs)
1 x	Horn largo 50x26
1 x	Horn micro T2 Ø 1 (2 uds)
1 x	Barandilla L250 mm (10 pcs)
1 x	Bisagra 4x14 mm (20 pcs)
1 x	Acoplador laton Ø 5 mm L: 25 mm
2 x	Ancla de remolque Met. 60 mm
2 x	Cartucho de humo Verde 140 g
2 x	PCARD sistema wireless
2 x	Cartucho de humo Verde 65 g
2 x	Cartuchos de humo AX-18 blanco (5 pcs)
2 x	Cartuchos de humo AX-60 rojo (5 pcs)
2 x	Kit de montaje "S" para barco
1 x	Horn largo de latón M2 para cable (10 pcs)
1 x	Horn de mando medio extrafuerte con rodamiento 2,8x24
1 x	Horn de mando variable inclinado 6 mm M3
1 x	Horn de mando largo ajustable con rodamiento
2 x	Horn de mando extra-largo ajustable aluminio 2,8x34
1 x	Horn micro type4 Ø 0,5(2 pcs)
1 x	Acople ALU M2,5 Ø 4 (2 uds)
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
2 x	Horn mando small (2 pcs)
1 x	Horns indoor
1 x	Horn de mando variable inclinado 5 mm M2
1 x	Horn mando long (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Horn extra largo 60x30
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Horn de mando largo con rodamiento (2 ud)
1 x	Horn aluminio RH largo (2pcs)
2 x	Horn corto de latón M3 para cable (2 pcs)
1 x	Paracaidas XTRALITE S
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Horn con ball 40x30
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Ciano KAVAN Super Thin 20g
1 x	Conector MT-60 (pareja)
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	BETA 1400 RTF Red
2 x	Acoplador laton Ø 4.0 / 3.2 mm L: 25 mm
1 x	Piloto 1/6 "Buddy"
1 x	Motor A40-10S V4 14-Polos
1 x	Ancla 80 mm (2 uds)
1 x	Servo DL3017 Digi 17Kg-0.15s/60º
1 x	Brazos carbono para HITEC HS 65 (4 pcs)
1 x	Servo TONEGAWA PS-050
1 x	Micro Cristal RX 35.120 Ch 72
1 x	Plano IKARUS
1 x	Motor A40-10 L V2 14-Polos Glider
1 x	Motor A50-10L Turnado V3 Glider
1 x	Pegatinas números para marcar
1 x	Motor A60-5XS V4 28-pole kv420
1 x	Motor A20-12 L EVO
2 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Set de piñones metálicos HS81MG/5082MG
1 x	Brazo servo de carbono 25 mm
1 x	MIG 29 3D RTF, Servo
1 x	Conector de seguridad para servos (2 pcs)
1 x	Set montaje ala servos HS 80/81/82/85
1 x	Set de piñones metálicos HS85MG/5085MG
1 x	Fijaciones rápidas para servos (25 pcs)
1 x	Interface Jack Adapter IKARUS
2 x	Cartuchos de humo AX-60 mezclados (5 pcs)
2 x	Cartuchos de humo AX-60 blanco (5 pcs)
1 x	Hélice Falcon 12x6 eléctrica
1 x	Helice Carbono 12.5x7
1 x	Servo SAVOX SC-1251 MG
1 x	Marco de medición doble 35 mm (2 pcs)
1 x	Muñeco Operario 1:32
1 x	Ojal 10 mm (50 pcs)
1 x	Ojos de buey 13x9x6 mm (20 pcs)
1 x	Noray 48 mm (5 pcs)
1 x	Acoplador laton Ø 3.0 / 2.3 mm L: 20 mm
1 x	Gracia Maxi ARF, fundas (Top Model)
1 x	Gracia (Top Model)
1 x	SATORI 2 PRO V C64 F5J
1 x	Gracia Maxi ARF (Top Model)
1 x	Q-12 2000 mm Eléctrico
1 x	DINAMOETRO S-1580
1 x	Cartucho de humo Blanco 140 g
1 x	Cartucho de humo Blanco 65 g
1 x	Sistema remoto de ignición eléctrica
1 x	Horn de mando 6/27 con rótula M3
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Varilla mando roscada M2,0 (2 uds) 250 mm
1 x	Kwik link micro (10 uds)
1 x	Turbina KINGTECH K320 G5
1 x	Turbina JetsMunt M210TS
1 x	Helice Carbono 16x17
1 x	Helice Carbono 16x13
1 x	Servo SAVOX SC-1267 SG
1 x	Servo SAVOX SB-2271 SG
1 x	Bancada servo SAVOX SV-1260MG
1 x	Hélice RABOESCH.Ms 60R (5 Palas) (Hélice derecha)
1 x	Helice Race 40 mm 1/4"(hélice derecha)
1 x	Luz de tope 10 mm/3V roja (2 pcs)
1 x	Lámpara metal Ø 22 mm 3 V
1 x	Koffeenagel Holz hell 8 mm (20 pcs)
1 x	Base montaje Ms 12 mm
2 x	Grafas ARF 3.0 m (Top Model)
1 x	Acoplador laton Ø 5.0 / 4.0 mm L: 25 mm
1 x	Cargador Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Astra (Top Model)
1 x	Antena 50 mm (2 uds)
1 x	Ancla Admiralsanker 60 mm (2pcs)
1 x	Ancla 25 mm (2 uds)
1 x	Ancla 25 mm (2 uds)
1 x	Balsa salvavidas 47 mm
1 x	Ancla metal 40 mm (2 uds)
1 x	Ancla Met. 16 mm (5 pcs)
1 x	Gracia Maxi ARF, alas (Top Model)
1 x	Articulación para pluma de carga, 10x5 mm (2 pcs)
1 x	Ancla madera 30 mm (2 uds)
1 x	TAKEO 3.6m electric
1 x	Cartucho de humo Amarillo 100 g
1 x	Cartucho de humo Rojo 100 g
1 x	Cargas cohete B4-0 (6 pcs)
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Iniciador FRX2 Wireless Receptor
1 x	Set de Humo "M"
1 x	Paracaidista
1 x	Cartucho de humo Blanco 100 g
1 x	Cartucho de humo Rojo 65 g
1 x	Soporte ventral para AX-18/AX-60
1 x	Kit de montaje "M"
1 x	Cartucho de humo Rojo 140 g
1 x	Tapón plástico para AIR BURTS (30 pcs)
1 x	Set de Humo "Planeador"
1 x	Cartuchos de humo AX-60 negro (5 pcs)
1 x	Iniciador FTX2 Wireless Transmisor
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Cartuchos de humo AX-9 blanco (10 pcs)
1 x	Aceite para hacer humo 3l Smoke
1 x	Escape Pitts D.A. 70
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 4 m
1 x	Shaft sleeve LAMA
1 x	SIG Coverall 1,2x0,9 m
1 x	SIG Coverall 1,2x1,8 m
1 x	Rueda superlight deluxe 62 mm (2 pcs)
1 x	T-shape holder metal LAMA

21,658.34EUR