120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

1 x	ABS tube 8.0x7.0x1000 mm
4 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
3 x	25 mm reinforced hinge
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Micro flex hinge (12 uds)
2 x	Fast'n EZ-CA-Hinge (12 uds)
3 x	Nylon hinge for flaps 33x9 (2 pcs)
3 x	Long pinned hinge (6 uds)
3 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	Pin hinge 26x11 mm (10 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Miniature brass strap hinge, 1 m
3 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
3 x	Indoor hinge with servo arm integraded
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Oracover Black 10 m
1 x	ORACOVER Fluor red (2 m)
1 x	Oracover Azul Cielo 2 m
1 x	19 mm 2:1 black termoretract tube
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	12.7 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
2 x	Monokote BLUE metalizado (1.8x0.65m)
4 x	SERVO HOLDER
2 x	Tow hook for tug
2 x	LOWER TOW HOOK
2 x	Adjustable launching hook
2 x	Fixed launching hook
1 x	Towing hook
1 x	Tube Pitot to PIXHAWK
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Cabel charger transmitter GRAUPNER
1 x	Cable set Premium™ MAXI "one4two"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Xplorer1 anemometro
1 x	Xplorer4 anemometro
1 x	XICOY X45 rail
2 x	Towing hook
4 x	Gates hinge 30x16 mm (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Gates hinge aluminium (1 pcs)
1 x	15 mm reinforced hinge
1 x	Surprise XII Horizontal Estabilizer (Freudenthaler)
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	Small flex hinge (12 uds)
1 x	LED wire (blue - 2pcs)
1 x	LED wire (rojo - 2pcs)
1 x	NF-3X-350 set
1 x	Robart Door Hinge (Pk2)
1 x	Flap hinge (6 pcs)
2 x	Pin hinge 39x20 mm (10 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	LED blink wire flashing (green - 2pcs)
1 x	Jet Afterburner Simulator NF-Jet1RY Set
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x	LED wire (white - 2pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Large flex hinge (12 uds)
2 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Jet Afterburner Simulator NF-Jet2YY Set
1 x	Xplorer2 anemometro
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
2 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oracover CARBON Metalic 1 m
1 x	Oracover ROYAL RED 2m
3 x	Towing hook <3m
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	MYLAR film A350 (1000x500 mm)
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	Oracover Brown 2 m
1 x	Oracover Green10 m
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oratex Yellow Cub 10 m
1 x	Ply-Span 450x600/13g Blue
1 x	Oratex Red Fokker 10 m
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Oracover Azul 2 m
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Oratex Natural White 2m
1 x	ORACOVER transparent Yellow (10 m)
1 x	Motor mount VANQUIST 48" F3A
1 x	Extension silicon 30 cm male (Graupner)
1 x	Fuselage Bags JEEMO
1 x	Mini VISION "spread tow" CFK
1 x	Chili F3K 2 wing servo mounted
1 x	VAGABOND 1500 mm ARF V2 (Blue)
1 x	GP 15 JETA
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	XT60 Connector with Holder Male 2pcs
1 x	Small pinned hinge (12 uds)
1 x	ESC PULSAR A-40
1 x	10 mm aluminium spinner (Kavan)
1 x	Medium pin type hinge (12 uds)
1 x	Resistor 3W 5% OR82

8,180.95EUR