120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	SE Ring 400 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	Tape GFK 25 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 450 mm (2 pcs)
1 x
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
2 x	Cinta Goldfix 1m
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Piloto jet 130 mm
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Para-RC Mix
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Recessed MPX connector support (6 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Bateria DJI Mini 2 2250 mAh
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Three-function control switch by FUTABA
1 x	Fournier RF-4D
1 x	Tape GFK 38 mm
2 x	20x200 mm battery rings
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Foam plastic plates (310x210x5 mm)
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	Fiberglass plate 350x150x3.0 mm
1 x	Foam plastic plates (310x210x2 mm)
1 x	Carbon plate 350x150x2.0 mm
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x	Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x	Glow starter with charger 230v
1 x	Ball Bearing Oil 25 ml
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB

3,732.04EUR