13.76EUR

Program card KAVAN PRO
[KAV32.31035]


Program card KAVAN PRO
Tarjeta programadora KAVAN PRO

Programming card with LED display for KAVAN PRO series ESCs (also compatible with FOXY G2 controllers).
The LED programming card for KAVAN PRO series ESCs (also compatible with FOXY G2 ESCs) for aircraft is used for easy and fast programming of ESCs - at home "on the table" as well as at the airport. The ESC is connected via a servo cable, the socket is located on the top of the box. The power supply of the card is provided by the BEC stabilizer power supply of the KAVAN PRO ESC or by a common 4-5 cell NiCd/NiMH or 2S LiPo/LiFe receiver battery connected to the box (in case of the OPTO ESC). Programming is done with both motor and drive battery connected (also in case of OPTO ESCs).
WARNING: The KAVAN PRO LED programming card cannot be used to program the first generation FOXY ESCs and the first generation FOXY programming card cannot be used to program the KAVAN PRO ESCs.
The KAVAN PRO air ESCs can be programmed in a model with a propeller mounted - for safety reasons, however, we still recommend removing the propeller when programming - this will prevent a possible accident in the event of an omission or operator error. Similarly, program ESCs in cars and boats safely perched on a stand with the wheels or propeller in the air or with the pinion or propeller shaft coupling removed.
Four buttons on the front panel of the card are used for programming. Use them to select the program functions ("ITEM") for setting and to set their value ("VALUE"). The "OK" button confirms the change and sends it to the ESC, the "RESET" button is used to clear all settings and return all values to the factory default settings. The program function number is displayed on the left on the two-digit LED display ("ITEM"), the function value is displayed on the one-digit LED display on the right ("VALUE").
The method of connecting the ESC to the LED programming card depends on the type of ESC - it varies depending on whether it is a BEC ESC with a power supply stabilizer or an OPTO ESC. When wiring, follow exactly the instructions supplied with the card and your ESC.
A list of functions and adjustable values is provided on the label on the card; a detailed description of the functions is provided in the manuals supplied with the FOXY G2 ESCs.
Programming card kit includes: KAVAN PRO LED programming card, three-wire programming cable, instructions.
Supply voltage [V]: 4.8 - 8.4 ; Lenght [mm]: 88 ; Width [mm]: 58 ; Height [mm]: 14 ; Weight [g]: 40
Power supply [V] 4.8 - 8.4
Length [mm] 88
Width [mm] 58
Height [mm] 14


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Hovercraft sailcloth
1 x Servo NARO Max Std
1 x BOX-Setup Actro-marine
1 x Landing gear Rocket 400
2 x P 17×5.8 Prop-2PCS/PAIR
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x GLOW 2C + accesories
1 x Complete kit CAT 966G II WEDICO-construction-models
1 x 
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x BETA 1400 ARF Red
1 x Conector MT-60 (pair)
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x Glow Plug Clip 1.3 Ah
1 x Ciano KAVAN Medium 20g
2 x Propeller RABOESCH M4 70 mm (5 Blades) (Left)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Glow starter with charger 230v
1 x 10 mm aluminium spinner (Kavan)
1 x Battery LiPo GRE18 600 mAh 7.4v
1 x Pin hinge 26x11 mm (10 uds)
1 x Opto Gas Engine Kill Switch
1 x RCEXL Electronic ignition twin CM-6
1 x Landing gear strap small (4 uds)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Body for landing gear Ø 4 mm
1 x Festo Adaptor Tygon Large/4mm
1 x T-Hose connector 3-3-3 mm
1 x Faucet FESTO
1 x Wheel cover holder Ø 5 mm (2 uds)
1 x Landing gear retract neumatic (Jet Legend)
1 x Landing gear strap medium (4 uds)
1 x Y-Hose connector 4-4-4mm
1 x Z-shaped servo mount
1 x Body for landing gear Ø 3 mm
1 x Wheel cover holder Ø 6 mm (2 uds)
1 x Metal ring front FEMA
1 x Tap FESTO 4-4 mm
1 x LA500 tail empennage
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Dust collector for mould cleaning
1 x Oils Pumps Empty (1 liter)
1 x Xplorer4 anemometro
1 x Propeller CFK 18,5x12
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Propeller CFK 17x18
1 x Propeller CFK 12.75x13
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Propeller CFK 12.5x6.5
1 x Head core bushing
1 x Raer wall
1 x Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x Steering lever
1 x Propeller set 400 (2R+2L)
1 x Propeller CFK 18x16
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
3 x Round Rod 1.0x3.5 cm
2 x Pulley brass 6/1,5 (2 pcs)
2 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Metal ball clevis M3 (10 uds)
1 x Dummy motor GPW Wasp Scale 1/4
1 x Lipo KAVAN 2200 mAh 11.1v 30/60C
1 x Extension 15 cm (Futaba)
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Turnbuckle M1,6x20/30 (2pcs)
1 x Cable coupler M2x66 (2 uds)
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x 4 mm M3 red control terminal (4 pcs)
1 x wire tensioner (blue)
1 x Turnbuckle M3 33x49 (2pcs)
1 x Cable coupler M2 (10 uds)
1 x Turnbuckle M1,6x17/27 (2pcs)
1 x wire tensioner (black)
1 x Pull-Pull complet set with CF rudder double servo arm
1 x Cable coupler M3 (10 uds)
1 x Wire easy tensioner (silver)
1 x Pulley brass 8/2 (2 pcs)
1 x Cable coupler M2,5 (2 pcs)
1 x Cable coupler M3 (10 uds)
1 x Lipo KAVAN 2200 mAh 11.1v 40/80C
1 x Recess mount-rem. glow plug set
1 x Rubber Insert soft, 1 Pcs.
1 x Cable coupler M2 (10 uds)
1 x Swashplate metal LAMA
1 x SIG Coverall 1.2x4.5 m
1 x Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x wire tensioner (red)
1 x Set clevis for pull-pull (TY13233 & TY13234)
1 x Turnbuckle M2,5x27/43 (2pcs)
1 x Turnbuckle M2x22/35 (2pcs)
1 x wire tensioner (silver)
1 x Threaded coupler M2,5 (10 pcs)
1 x Pulley brass 4/1,5 (2 pcs)
1 x Pulley brass 14/2 (2 pcs)
1 x Pulley brass 2,5/1 (2 pcs)
1 x Turnbuckle M2x29/43 (2pcs)
1 x Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x Spinner 60 mm White (Kavan)
1 x Spinner 40 mm Black (Kavan)
1 x Gasket electric Fuel Pump
1 x Window mounting channel 5m
1 x GRE-18 RTR Crawler 1:18 Blue
1 x Maxi Fuel Filter
1 x Debonder CA 20g
1 x 25 mm Sandpaper file
1 x T-shape holder metal LAMA
1 x Superlight standard wheel 100 mm (2 pcs)
1 x Superlight deluxe wheel 75 mm (2 pcs)
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Superlight wheel 125 mm with valve (2 pcs)
1 x Superlight deluxe wheel 50 mm (2 pcs)
1 x A/C quality beech plywood 600x300x6.0 mm
1 x ESC KAVAN PRO-160HV Opto 160 Amp
1 x Superlight deluxe wheel 56 mm (2 pcs)
1 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x SAVAGE Max Red 1080 mm
1 x Program card KAVAN PRO
1 x M3 INDUSTRIAL ball link (2 uds)
1 x ESC KAVAN R-80SB SBEC 80A
1 x Birch plywood plate 600x300x1.5 mm
1 x Smart Soldering Iron 110W/230V AC
1 x Program Card KAVAN ES
1 x M3 Maxi ball link (2 uds)
1 x Valvula One way
7,769.62EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies